This adds a CCID3 debug option to the configuration menu
which is missing in Kconfig, but already used by the code.

CCID 2 already provides such an entry.

To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y

NOTE: The use of ccid3_{t,r}x_state_name is safe, since
      now only enum values can appear.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This patch tackles the following problem:
       * the ccid3_hc_{t,r}x_sock define ccid3hc{t,r}x_state as `u8', but
         in reality there can only be a few, pre-defined enum names
       * this necessitates addiditional checking for unexpected values
         which would otherwise be caught by the compiler
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Updates the references to spec documents throughout the code, taking into
account that

* the DCCP, CCID 2, and CCID 3 drafts all became RFCs in March this year

* RFC 1063 was obsoleted by RFC 1191

* draft-ietf-tcpimpl-pmtud-0x.txt was published as an Informational
  RFC, RFC 2923 on 2000-09-22.

All references verified.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With constants for CCID numbers this now uses them in some places.
Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

As Arnaldo Carvalho de Melo points out I should be using list_entry in case
the structure changes in future. Current code functions but is reliant
on position and requires type cast.

Noticed when doing this that I have one more variable than I needed so
removing that also.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes CCID3 to give much closer performance to RFC4342.

CCID3 is meant to alter sending rate based on RTT and loss.

The performance was verified against:
http://wand.net.nz/~perry/max_download.php

For example I tested with netem and had the following parameters:
Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%.

This gives a theoretical speed of 71.9 Kbits/s. I measured across three
runs with this patch set and got 70.1 Kbits/s. Without this patchset the
average was 232 Kbits/s which means Linux can't be used for CCID3 research
properly.

I also tested with netem turned off so box just acting as router with 1.2
msec RTT. The performance with this is the same with or without the patch
at around 30 Mbit/s.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just updating copyright and contacts

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

And not the silly LIMIT_NETDEBUG and silently return without inserting
the option requested.

Also drop some old debugging messages associated to option insertion.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I guess I forgot to add it, nah, now it just works:

18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0)
18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code)

Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both
IPv6 and IPv4, so I'll come up with another way for freeing the
control sockets in upcoming changesets.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This also fixes the layout of dccp_hdr short sequence numbers, problem
was not fatal now as we only support long (48 bits) sequence numbers.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. No need for ->ccid_init nor ->ccid_exit, this is what module_{init,exit}
   does and anynways neither ccid2 nor ccid3 were using it.

2. Rename struct ccid to struct ccid_operations and introduce struct ccid
   with a pointer to ccid_operations and rigth after it the rx or tx
   private state.

3. Remove the pointer to the state of the half connections from struct
   dccp_sock, now its derived thru ccid_priv() from the ccid pointer.

Now we also can implement the setsockopt for changing the CCID easily as
no ccid init routines can affect struct dccp_sock in any way that prevents
other CCIDs from working if a CCID switch operation is asked by apps.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Testing if the ccid being instantiated has these methods in
ccid_init().
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which
leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check
for zero return now. Update copyright notice at same time.

Found by Arnaldo.
Signed-off-by: NIan McDonald <imcdnzl@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocation for the optnames is similar to the DCCP options, with a
range for rx and tx half connection CCIDs.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also use some BUG_ON where appropriate and use LIMIT_NETDEBUG for the unlikely
cases where we, at this stage, want to know about, that in my tests hasn't
appeared in the radar.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

To match more closely what is described in RFC 3448.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NIan McDonald <iam4@cs.waikato.ac.nz>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

To start the timestamps with 0.0ms, easing the integer maths in the CCIDs, this
probably will be reworked to use the to be introduced struct timeval_offset
infrastructure out of skb_get_timestamp, etc.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

The initialization of ccid3hcrx_rtt to 5ms is just a bandaid, I'll continue
auditing the CCID3 HC rx codebase to fix this properly, probably I'll add a
feedback timer as suggested in the CCID3 draft.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This makes the send rate calculations behave way more closely to what
is specified, with the jitter previously seen on x and x_recv
disappearing completely on non lossy setups.

This resembles the tcp_data_snd_check code, that possibly we'll end up
using in DCCP as well, perhaps moving this code to
inet_connection_sock.

For now I'm doing the simplest implementation tho.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So that applications can set dccp_sock->dccps_pkt_size, that in turn
is used in the CCID3 half connection init routines to set
ccid3hc[tr]x_s and use it in its rate calculations.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Renaming it to dccp_rx_hist_detect_loss.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Renaming it to dccp_rx_hist_add_packet.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And put this into net/dccp/ccids/lib/, where packet_history.[ch] will also be
moved and then we'll have a tfrc_lib.ko module that will be used by
dccp_ccid3.ko and other CCIDs that are variations of TFRC (RFC 3448).
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To avoid open coding this all over the place.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introducing functions to add to or subtract from a timeval variable
and renaming now_delta to timeval_new_delta that calls do_gettimeofday
and then timeval_delta, that should be used when there are several
deltas made relative to the current time or setting variables to it,
so as to avoid calling do_gettimeofday excessively.

I'm leaving these "timeval_" prefixed funcions internal to DCCP for a
while till we're sure there are no subtle bugs in it.

It also is more correct as it checks if the number of usecs added to
or subtracted from a tv_usec field is more than 2 seconds.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No code changes.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is not quite what I think we should have long term but improves
performance for now, so lets use it till we get CCID3 working well,
then we can think about using sk_write_queue, perhaps using some ideas
from Juwen Lai's old stack for 2.4.20.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>