CC      arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1

This happens because 8deab114 [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NMarkos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/

The write() prototype expects a const char * as argument so declare
it as such.

Fixes the following build problem:

arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's needed for the TASK_INTERRUPTIBLE definition.

Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)

[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fixes the following build problem:

arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int':
arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf'
[-Werror=unused-variable]
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5481/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

ap136_pci_init expects a u8 pointer as an argument.

Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge
device (CS5536 general purpose timer) for the timer interrupt. It starts
running early and is already enabled during the PCI configuration,
during which there is a small window in pci_read_base() when the register
access is temporarily disabled. If the timer interrupts at this point,
the system will hang. Fix this by adding a fixup that keeps the register
access always enabled.

The hang the patch fixes usually looks like this:

[    0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
[    0.848000] pci 0000:00:0e.0: reg 10: [io  0xb410-0xb417]
[    0.852000] pci 0000:00:0e.0: reg 14: [io  0xb000-0xb0ff]
[    0.856000] pci 0000:00:0e.0: reg 18: [io  0xb380-0xb3bf]
[   28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[   28.140000] Modules linked in:
[   28.140000] irq event stamp: 37965
[   28.140000] hardirqs last  enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c
[   28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c
[   28.140000] softirqs last  enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258
[   28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0
[   28.140000] Cpu 0
[   28.140000] $ 0   : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001
[   28.140000] $ 4   : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011
[   28.140000] $ 8   : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011
[   28.140000] $12   : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000
[   28.140000] $16   : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000
[   28.140000] $20   : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000
[   28.140000] $24   : 0000000000000d80 00000000fffedbe0
[   28.140000] $28   : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8
[   28.140000] Hi    : 0000000000d0fc00
[   28.140000] Lo    : 0000000000f82b40
[   28.140000] epc   : ffffffff8023810c __do_softirq+0xe4/0x258
[   28.140000]     Not tainted
[   28.140000] ra    : ffffffff802380f8 __do_softirq+0xd0/0x258
[   28.140000] Status: 140044e3    KX SX UX KERNEL EXL IE
[   28.140000] Cause : 10008400
[   28.140000] PrId  : 00006303 (ICT Loongson-2)
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4958/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

FAULT_INJECTION_STACKTRACE_FILTER selects FRAME_POINTER but
that symbol is not available for MIPS.

Fixes the following problem on a randconfig:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP &&
 KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies
(DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN ||
MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS)
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5441/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit abe77f90 (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself.  The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel.  Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.

The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:

  CC      arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  LD      init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  LD      init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather
complex and are no longer usable from assembler resulting in an
explosion like this:

  AS      arch/mips/kernel/head.o
arch/mips/kernel/head.S: Assembler messages:
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
make[2]: *** [arch/mips/kernel/head.o] Error 1

Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe
to hardcode the TLB bits there.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's IP27-specific and can only cause trouble in head.S.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  CC      drivers/rapidio/switches/idt_gen2.o
drivers/rapidio/switches/idt_gen2.c: In function ‘idtg2_show_errlog’:
drivers/rapidio/switches/idt_gen2.c:379:30: error: ‘PAGE_SIZE’ undeclared (first use in this function)
drivers/rapidio/switches/idt_gen2.c:379:30: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  CC      init/do_mounts.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/linux/skbuff.h:33,
                 from include/linux/icmpv6.h:4,
                 from include/linux/ipv6.h:59,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:26,
                 from include/linux/nfs_fs.h:30,
                 from init/do_mounts.c:30:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
  LD      init/mounts.o
  CC      init/init_task.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/linux/skbuff.h:33,
                 from include/linux/netfilter.h:5,
                 from include/net/netns/netfilter.h:5,
                 from include/net/net_namespace.h:20,
                 from include/linux/init_task.h:14,
                 from init/init_task.c:1:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
  LD      init/built-in.o
  CC      arch/mips/cavium-octeon/setup.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/asm-generic/pci-dma-compat.h:7,
                 from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129,
                 from include/linux/pci.h:1451,
                 from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12,
                 from arch/mips/cavium-octeon/setup.c:41:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1
make[1]: *** [arch/mips/cavium-octeon] Error 2
make: *** [arch/mips] Error 2

[ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5519/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:

arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch_ftrace_update_code and ftrace_modify_all_code are only
available if CONFIG_DYNAMIC_FTRACE is selected.

Fixes the following build problem on MIPS randconfig:

arch/mips/kernel/ftrace.c: In function 'arch_ftrace_update_code':
arch/mips/kernel/ftrace.c:31:2: error: implicit declaration of function
'ftrace_modify_all_code' [-Werror=implicit-function-declaration]
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5435/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kvm_* symbols are only available if KVM is selected.

Fixes the following linking problem on a randconfig:

arch/mips/built-in.o: In function `local_flush_tlb_mm':
(.text+0x18a94): undefined reference to `kvm_local_flush_tlb_all'
arch/mips/built-in.o: In function `local_flush_tlb_range':
(.text+0x18d0c): undefined reference to `kvm_local_flush_tlb_all'
kernel/built-in.o: In function `__schedule':
core.c:(.sched.text+0x2a00): undefined reference to `kvm_local_flush_tlb_all'
mm/built-in.o: In function `use_mm':
(.text+0x30214): undefined reference to `kvm_local_flush_tlb_all'
fs/built-in.o: In function `flush_old_exec':
(.text+0xf0a0): undefined reference to `kvm_local_flush_tlb_all'
make: *** [vmlinux] Error 1
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5437/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Only an interrupt can wake the core from 'wait', enable interrupts
locally before executing 'wait'.

[ralf@linux-mips.org: This leave the race between an interrupt that's
setting TIF_NEED_RESCHEd and entering the WAIT status. but at least it's
going to bring Alchemy back from the dead, so I'm going to apply this
patch.]
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5408/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes warnings due to missing lock on write error path.

  WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
  Hardware name: empty
  Pid: 26563, comm: dd Tainted: P           O 3.9.4 #12
  Call Trace:
    hpfs_truncate+0x75/0x80 [hpfs]
    hpfs_write_begin+0x84/0x90 [hpfs]
    _hpfs_bmap+0x10/0x10 [hpfs]
    generic_file_buffered_write+0x121/0x2c0
    __generic_file_aio_write+0x1c7/0x3f0
    generic_file_aio_write+0x7c/0x100
    do_sync_write+0x98/0xd0
    hpfs_file_write+0xd/0x50 [hpfs]
    vfs_write+0xa2/0x160
    sys_write+0x51/0xa0
    page_fault+0x22/0x30
    system_call_fastpath+0x1a/0x1f
Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: stable@kernel.org  # 2.6.39+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:

 - Trivial: unused variable removal

 - Posix-timers: Add the clock ID to the new proc interface to make it
   useful.  The interface is new and should be functional when we reach
   the final 3.10 release.

 - Cure a false positive warning in the tick code introduced by the
   overhaul in 3.10

 - Fix for a persistent clock detection regression introduced in this
   cycle

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Correct run-time detection of persistent_clock.
  ntp: Remove unused variable flags in __hardpps
  posix-timers: Show clock ID in proc file
  tick: Cure broadcast false positive pending bit warning

Pull irqdomain bug fixes from Grant Likely:
 "This branch contains a set of straight forward bug fixes to the
  irqdomain code and to a couple of drivers that make use of it."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
  irqchip: Return -EPERM for reserved IRQs
  irqdomain: document the simple domain first_irq
  kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
  irqdomain: export irq_domain_add_simple

The irqdomain core will report a log message for any attempted map call
that fails unless the error code is -EPERM. This patch changes the
Versatile irq controller drivers to use -EPERM because it is normal for
a subset of the IRQ inputs to be marked as reserved on the various
Versatile platforms.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:

ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes for arm-soc platforms.

  Nothing controversial here, a handful of fixes for regressions and/or
  serious problems across several of the platforms.  Things are slowing
  down nicely on fix rates for 3.10"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
  ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
  ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
  sh-pfc: r8a7779: Don't group USB OVC and PENC pins
  ARM: mxs: icoll: Fix interrupts gpio bank 0
  ARM: imx: clk-imx6q: AXI clock select index is incorrect
  ARM: bcm2835: override the HW UART periphid
  ARM: mvebu: Fix bug in coherency fabric low level init function
  ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation
  ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
  ARM: ux500: Only configure wake-up reasons on ux500 based platforms
  ARM: dts: imx: fix clocks for cspi
  ARM i.MX6q: fix for ldb_di_sels

Pull MIPS fixes from Ralf Baechle:
 "MIPS fixes across the field.  The only area that's standing out is the
  exception handling which received it's dose of breakage as part of the
  microMIPS patchset"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: ralink: add missing SZ_1M multiplier
  MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf.
  MIPS: OCTEON: Improve _machine_halt implementation.
  MIPS: rtlx: Fix implicit declaration of function set_vi_handler()
  MIPS: Trap exception handling fixes
  MIPS: Quit exposing Kconfig symbols in uapi headers.
  MIPS: Remove duplicate definition of check_for_high_segbits.