Pull ARM SoC defconfig updates from Arnd Bergmann:
 "Defconfig additions, removals, etc. Almost all of them just turn on
  drivers that we want on some platform, usually after the driver has
  been merged into mainline.

  There is now a new defconfig file for tango4"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: multi_v7_defconfig: enable pstore configs
  ARM: multi_v7_defconfig: enable some newly added crypto modules
  ARM: davinci_all_defconfig: enable SATA modules
  arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
  arm64: defconfig: enable CONFIG_MTD_BLOCK
  ARM: Import tango4_defconfig
  ARM: omap2plus_defconfig: Enable support for RTC M41T80
  ARM: omap2plus_defconfig: Enable support for micrell phys
  ARM: vf610m4: defconfig: enable EXT4 filesystem
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  arm64: defconfig: Enable NUMA and NUMA_BALANCING
  arm64: defconfig: enable SMMUv3 config
  ARM: davinci_all_defconfig: enable iio
  ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
  ARM: configs: stm32: Add RTC support in STM32 defconfig
  ARM: defconfig: qcom: add APQ8060 DragonBoard devices
  ARM: qcom_defconfig: enable thermal sensors
  ARM: qcom_defconfig: add ahci configs
  ARM: qcom_defconfig: add pcie and atl1c ethernet configs
  ARM: qcom_defconfig: add usb related configs
  ...

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms, only trivial stuff
  this time, a few defconfig changes to enable drivers, and a new entry
  for the Cavium ThunderX2 platform"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add Cavium ThunderX2 entry
  arm64: add ARCH_THUNDER2 to defconfig
  arm64: add THUNDER2 processor family
  MAINTAINERS: Extend ARM/Mediatek SoC support section
  arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE
  arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "We sometimes collect non-critical fixes that come in during the later
  part of the merge window in a branch for the next release instead, and
  this is that contents for v4.11.

  Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
  and setup. There's also some fixes for Davinci and a Kconfig fix for
  SCPI to only enable on ARM{,64}"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  firmware: arm_scpi: Add hardware dependencies
  ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  ARM: dts: Fix compatible for ti81xx uarts for 8250
  ARM: dts: Fix am335x and dm814x scm syscon to probe children
  ARM: OMAP2+: Fix init for multiple quirks for the same SoC
  ARM: dts: Fix omap3 off mode pull defines
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix

Pull PCI updates from Bjorn Helgaas:

 - add ASPM L1 substate support

 - enable PCIe Extended Tags when supported

 - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx

 - increase VPD access timeout

 - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432

 - use new pci_irq_alloc_vectors() in more drivers

 - fix MSI affinity memory leak

 - remove unused MSI interfaces and update documentation

 - remove unused AER .link_reset() callback

 - avoid pci_lock / p->pi_lock deadlock seen with perf

 - serialize sysfs enable/disable num_vfs operations

 - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and
   refactor so we can support both hosts and endpoints

 - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers

 - add Rockchip system power management support

 - add Thunder-X cn81xx and cn83xx support

 - add Exynos 5440 PCIe PHY support

* tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits)
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  ...

Pull networking fixes from David Miller:

 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal.

 2) Fix scheduling while atomic in l2tp network namespace exit by
    deferring the work to the workqueue. From Ridge Kennedy.

 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin.

 4) mlx5e CQE compression engine not initialized properly, from Tariq
    Toukan.

 5) Some UAPI header fixes from Dmitry V. Levin.

 6) Don't overwrite module parameter value in mlx4 driver, from Majd
    Dibbiny.

 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban
    Browaeys.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  bpf: Fix bpf_xdp_event_output
  net/mlx4_en: Use __skb_fill_page_desc()
  net/mlx4_core: Use cq quota in SRIOV when creating completion EQs
  net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
  net/mlx4: Spoofcheck and zero MAC can't coexist
  net/mlx4: Change ENOTSUPP to EOPNOTSUPP
  uapi: fix linux/rds.h userspace compilation errors
  uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors
  lib: Remove string from parman config selection
  forcedeth: Remove return from a void function
  bpf: fix spelling mistake: "proccessed" -> "processed"
  uapi: fix linux/llc.h userspace compilation error
  uapi: fix linux/ip6_tunnel.h userspace compilation errors
  net/mlx5e: Fix wrong CQE decompression
  net/mlx5e: Update MPWQE stride size when modifying CQE compress state
  net/mlx5e: Fix broken CQE compression initialization
  net/mlx5e: Do not reduce LRO WQE size when not using build_skb
  net/mlx5e: Register/unregister vport representors on interface attach/detach
  net/mlx5e: s390 system compilation fix
  tcp: account for ts offset only if tsecr not zero
  ...

Pull Mellanox rdma updates from Doug Ledford:
 "Mellanox specific updates for 4.11 merge window

  Because the Mellanox code required being based on a net-next tree, I
  keept it separate from the remainder of the RDMA stack submission that
  is based on 4.10-rc3.

  This branch contains:

   - Various mlx4 and mlx5 fixes and minor changes

   - Support for adding a tag match rule to flow specs

   - Support for cvlan offload operation for raw ethernet QPs

   - A change to the core IB code to recognize raw eth capabilities and
     enumerate them (touches non-Mellanox code)

   - Implicit On-Demand Paging memory registration support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits)
  IB/mlx5: Fix configuration of port capabilities
  IB/mlx4: Take source GID by index from HW GID table
  IB/mlx5: Fix blue flame buffer size calculation
  IB/mlx4: Remove unused variable from function declaration
  IB: Query ports via the core instead of direct into the driver
  IB: Add protocol for USNIC
  IB/mlx4: Support raw packet protocol
  IB/mlx5: Support raw packet protocol
  IB/core: Add raw packet protocol
  IB/mlx5: Add implicit MR support
  IB/mlx5: Expose MR cache for mlx5_ib
  IB/mlx5: Add null_mkey access
  IB/umem: Indicate that process is being terminated
  IB/umem: Update on demand page (ODP) support
  IB/core: Add implicit MR flag
  IB/mlx5: Support creation of a WQ with scatter FCS offload
  IB/mlx5: Enable QP creation with cvlan offload
  IB/mlx5: Enable WQ creation and modification with cvlan offload
  IB/mlx5: Expose vlan offloads capabilities
  IB/uverbs: Enable QP creation with cvlan offload
  ...

Pull VFIO updates from Alex Williamson:

 - Kconfig fixes for SPAPR_TCE_IOMMU=n (Michael Ellerman)

 - Module softdep rather than request_module to simplify usage from
   initrd (Alex Williamson)

 - Comment typo fix (Changbin Du)

* tag 'vfio-v4.11-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: fix a typo in comment of function vfio_pin_pages
  vfio: Replace module request with softdep
  vfio/mdev: Use a module softdep for vfio_mdev
  vfio: Fix build break when SPAPR_TCE_IOMMU=n

Fix a typo. xdp->data instead of xdp should be copied to the perf-event's
dst_buff.

Fixes: 4de16969 ("bpf: enable event output helper also for xdp types")
Reported-by: NHuapeng Zhou <hzhou@fb.com>
Tested-by: NFeixiong Zhang <feixiong@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull crypto update from Herbert Xu:
 "API:
   - Try to catch hash output overrun in testmgr
   - Introduce walksize attribute for batched walking
   - Make crypto_xor() and crypto_inc() alignment agnostic

  Algorithms:
   - Add time-invariant AES algorithm
   - Add standalone CBCMAC algorithm

  Drivers:
   - Add NEON acclerated chacha20 on ARM/ARM64
   - Expose AES-CTR as synchronous skcipher on ARM64
   - Add scalar AES implementation on ARM64
   - Improve scalar AES implementation on ARM
   - Improve NEON AES implementation on ARM/ARM64
   - Merge CRC32 and PMULL instruction based drivers on ARM64
   - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64
   - Add IPsec AUTHENC implementation in atmel
   - Add Support for Octeon-tx CPT Engine
   - Add Broadcom SPU driver
   - Add MediaTek driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
  crypto: xts - Add ECB dependency
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - remove dead MSI-X related define
  crypto: brcm - Avoid double free in ahash_finup()
  crypto: cavium - fix Kconfig dependencies
  crypto: cavium - cpt_bind_vq_to_grp could return an error code
  crypto: doc - fix typo
  hwrng: omap - update Kconfig help description
  crypto: ccm - drop unnecessary minimum 32-bit alignment
  crypto: ccm - honour alignmask of subordinate MAC cipher
  crypto: caam - fix state buffer DMA (un)mapping
  crypto: caam - abstract ahash request double buffering
  crypto: caam - fix error path for ctx_dma mapping failure
  crypto: caam - fix DMA API leaks for multiple setkey() calls
  crypto: caam - don't dma_map key for hash algorithms
  crypto: caam - use dma_map_sg() return code
  crypto: caam - replace sg_count() with sg_nents_for_len()
  crypto: caam - check sg_count() return value
  crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc()
  ..

Pull rpmsg updates from Bjorn Andersson:
 "This introduces an interface for user space to directly communicate on
  rpmsg endpoints without the implementation of specific kernel drivers,
  which is useful for e.g. debug channels:

* tag 'rpmsg-v4.11' of git://github.com/andersson/remoteproc:
  rpmsg: rpmsg_create_ept() returns NULL on error
  rpmsg: qcom: smd: Return positively when not enabled
  rpmsg: unlock on error in rpmsg_eptdev_read()
  rpmsg: char: add CONFIG_NET dependency
  rpmsg: smd: Register rpmsg user space interface for edges
  rpmsg: Driver for user space endpoint interface
  rpmsg: qcom_smd: Implement endpoint "poll"
  rpmsg: Introduce "poll" to endpoint ops
  rpmsg: qcom_smd: Add support for "label" property

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for booting the dedicated sensor core in the
  Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
  utilize SMD subdevice helpers for properly handle shutdowns and
  restarts of the remoteproc, add virtio support to the ST remoteproc
  and refactor the Qualcomm Hexagon driver to handle variations between
  platforms.

  The support code for parsing, loading and authenticating Qualcomm
  firmware files (MDT) is refactored and move to drivers/soc/qcom, to
  allow for non-remoteproc drivers to utilize this.

  Finally it brings some cleanups to the remoteproc core"

* tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits)
  remoteproc: qcom: mdt_loader: Use signed type for offset
  remoteproc: st: add virtio communication support
  remoteproc: st: correct probe error management
  remoteproc: Modify the function names
  remoteproc: Reduce asynchronous request_firmware to auto-boot only
  remoteproc: Drop qcom_scm_pas_supported() from adsp_probe()
  MAINTAINERS: Add missing rpmsg include path
  remoteproc: qcom: Use common SMD edge handler
  remoteproc: qcom: wcnss: Make SMD handling common
  remoteproc: Move qcom_mdt_loader into drivers/soc/qcom
  remoteproc: qcom: mdt_loader: Refactor MDT loader
  remoteproc: qcom: mdt_loader: Don't overwrite firmware object
  remoteproc: qcom: Extract non-mdt related helper
  remoteproc: qcom: q6v5: Decouple driver from MDT loader
  remoteproc: qcom: q6v5: Remove mss supply from 8916
  remoteproc: qcom: fix initializers for qcom_mss_reg_res array
  remoteproc: Drop firmware_loading_complete
  remoteproc: Add RPROC_DELETED state
  remoteproc: Move rproc_delete_debug_dir() to rproc_del()
  remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.
  ...

Pull GFS2 fix from Bob Peterson:
 "This is an addendum for the 4.11 merge window.

  Andy Price wrote this patch to close a nasty race condition that
  allows access to glocks that are being destroyed. Without this patch,
  GFS2 is vulnerable to random corruption and kernel panic"

* tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Add missing rcu locking for glock	lookup

Pull sound updates from Takashi Iwai:
 "Here is the update of sound bits for 4.11: again at this time, no big
  changes in ALSA and ASoC core but only cosmetic changes like
  consitifaction.

  Meanwhile, quite a lot of developments are seen in a few driver side.

  ALSA Core:
   - Clean up, consitification of some ops

  HD-audio:
   - A slight behavior change of single_cmd option
   - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
     HP, and fixes for Lewisburg controller
   - Realtek ALC299, ALC1220 codecs

  Others:
   - USB-audio: Tascam US-16x08 DSP mixer quirk
   - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
     contains some updates in drm/i915 for the new platform binding

  ASoC:
   - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
     on Skylake and onwards, as well as more Baytrail / Cherrytrail
     boards support
   - Channel mapping support for HDMI
   - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
     Nuvoton NAU8540.

* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
  ALSA: usb-audio: Tidy up mixer_us16x08.c
  ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
  ALSA: usb-audio: purge needless variable length array
  ALSA: x86: hdmi: select CONFIG_SND_PCM
  ALSA: x86: Don't enable runtime PM as default
  ALSA: x86: Use runtime PM autosuspend
  ALSA: usb-audio: localize function without external linkage
  ALSA: usb-audio: localize one-referrer variable
  ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
  ALSA: emu10k1: constify snd_emux_operators structure
  ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
  ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
  ASoC: nau8825: automatic BCLK and LRC divde in master mode
  ASoC: hdac_hdmi: Add device id for Geminilake
  ASoC: Intel: Skylake: Add Geminlake IDs
  ASoC: rt298: Add DMI match for Geminilake reference platform
  ASoC: Intel: Skylake: Check device type to get endpoint configuration
  ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...

Pull input updates from Dmitry:

 - a new driver for Zeitech touchscreen controller

 - a new driver for Samsung "touchkeys"

 - touchscreen driver for Moorestown platform has been removed because
   platform support is gone

 - MPU3050 accelerometer driver was removed in favor of IIO driver

 - miscellaneous driver cleanup and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits)
  Input: zet6223 - export OF device ID as module aliases
  Input: tsc2004/5 - switch to using generic device properties
  Input: tsc2004/5 - fix regulator handling
  Input: tsc2005 - add OF device table
  Input: add driver for Zeitec ZET6223
  Input: joydev - do not report stale values on first open
  Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
  Input: synaptics-rmi4 - clean up F30 implementation
  Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
  Input: psmouse - add a custom serio protocol to send extra information
  Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
  Input: xpad - restore LED state after device resume
  Input: synaptics-rmi4 - add rmi_find_function()
  Input: xpad - fix stuck mode button on Xbox One S pad
  Input: joydev - use clamp() macro
  Input: refuse to register absolute devices without absinfo
  Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
  Input: synaptics-rmi4 - add sysfs attribute update_fw_status
  Input: mousedev - stop offering PS/2 to userspace by default
  Input: tca8418 - switch to using generic device properties
  ...

Pull rdma updates from Doug Ledford:
 "First set of updates for 4.11 kernel merge window

   - Add new Broadcom bnxt_re RoCE driver
   - rxe driver updates
   - ioctl cleanups
   - ETH_P_IBOE declaration cleanup
   - IPoIB changes
   - Add port state cache
   - Allow srpt driver to accept guids as port names in config
   - Update to hfi1 driver
   - Update to srp driver
   - Lots of misc minor changes all over"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits)
  RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0."
  rdma_cm: fail iwarp accepts w/o connection params
  IB/srp: Drain the send queue before destroying a QP
  IB/core: Add support for draining IB_POLL_DIRECT completion queues
  IB/srp: Improve an error path
  IB/srp: Make a diagnostic message more informative
  IB/srp: Document locking conventions
  IB/srp: Fix race conditions related to task management
  IB/srp: Avoid that duplicate responses trigger a kernel bug
  IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS
  RDMA/qedr: Fix some error handling
  RDMA/bnxt_re: add DCB dependency
  IB/hns: include linux/module.h
  IB/vmw_pvrdma: Expose vendor error to ULPs
  vmw_pvrdma: switch to pci_alloc_irq_vectors
  IB/hfi1: use size_t for passing array length
  IB/ipoib: Remove redudant label
  IB/ipoib: remove the unnecessary memory free
  IB/mthca: switch to pci_alloc_irq_vectors
  IB/hfi1: Code reuse with memdup_copy
  ...

Pull backlight updates from Lee Jones:
 "Core Frameworks:
   - Add Daniel Thompson as co-maintainer

  Fix-ups:
   - Improve error handling; adp5520_bl
   - Split initial power checks into dedicated function; pwm_bl
   - Check current PWM status; pwm_bl

  Bug Fixes:
   - Fix potential race; lcd
   - Fix module auto-loading; da9052"

* tag 'backlight-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  MAINTAINERS: Rework entry for Backlight
  backlight: da9052: Fix module autoload
  backlight: pwm_bl: Check the PWM state for initial backlight power state
  backlight: pwm_bl: Move the checks for initial power state to a separate function
  backlight: adp5520: Fix error handling in adp5520_bl_probe()
  backlight: lcd: Fix race condition during register

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC
   - List include/dt-bindings/mfd/* to files supported in MAINTAINERS

  New Drivers:
   - Intel Apollo Lake SPI NOR
   - ST STM32 Timers (Advanced, Basic and PWM)
   - Motorola 6556002 CPCAP (PMIC)

  New Device Support:
   - Add support for AXP221 to axp20x
   - Add support for Intel Gemini Lake to intel-lpss-pci
   - Add support for MT6323 LED to mt6397-core
   - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6, COMe-cAL6 and
     COMe-cKL6 to kempld-core

  New Functionality:
   - Add support for Analog CODAC to sun6i-prcm
   - Add support for Watchdog to lpc_ich

  Fix-ups:
   - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl
   - Adapt platform data handling; axp20x
   - IRQ handling improvements; arizona, axp20x
   - Remove superfluous code; arizona, axp20x, lpc_ich
   - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt
   - Regmap fix-ups; axp20x
   - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912,
     mt6397
   - Use new I2C probing mechanism; max77686
   - Constification; rk808

  Bug Fixes:
   - Stop data transfer whilst suspended; cros_ec"

* tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (43 commits)
  mfd: lpc_ich: Enable watchdog on Intel Apollo Lake PCH
  mfd: lpc_ich: Remove useless comments in core part
  mfd: Add support for several boards to Kontron PLD driver
  mfd: constify regmap_irq_chip structures
  MAINTAINERS: Add include/dt-bindings/mfd to MFD entry
  mfd: cpcap: Add minimal support
  mfd: mt6397: Add MT6323 LED support into MT6397 driver
  Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
  mfd: tps65912: Export OF device ID table as module aliases
  mfd: ab8500-core: Rename clock device and compatible
  mfd: cros_ec: Send correct suspend/resume event to EC
  mfd: max77686: Remove I2C device ID table
  mfd: max77686: Use the struct i2c_driver .probe_new instead of .probe
  mfd: max77686: Use of_device_get_match_data() helper
  mfd: max77686: Don't attempt to get i2c_device_id .data
  mfd: ab8500-sysctrl: Handle probe deferral
  mfd: intel-lpss: Add Intel Gemini Lake PCI IDs
  mfd: axp20x: Fix AXP806 access errors on cold boot
  mfd: cros_ec: Send suspend state notification to EC
  mfd: cros_ec: Prevent data transfer while device is suspended
  ...

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Revisit warning logic when not applying default helper assignment.
   Jiri Kosina considers we are breaking existing setups and not warning
   our users accordinly now that automatic helper assignment has been
   turned off by default. So let's make him happy by spotting the warning
   by when we find a helper but we cannot attach, instead of warning on the
   former deprecated behaviour. Patch from Jiri Kosina.

2) Two patches to fix regression in ctnetlink interfaces with
   nfnetlink_queue. Specifically, perform more relaxed in CTA_STATUS
   and do not bail out if CTA_HELP indicates the same helper that we
   already have. Patches from Kevin Cernekee.

3) A couple of bugfixes for ipset via Jozsef Kadlecsik. Due to wrong
   index logic in hash set types and null pointer exception in the
   list:set type.

4) hashlimit bails out with correct userspace parameters due to wrong
   arithmetics in the code that avoids "divide by zero" when
   transforming the userspace timing in milliseconds to token credits.
   Patch from Alban Browaeys.

5) Fix incorrect NFQA_VLAN_MAX definition, patch from
   Ken-ichirou MATSUZAWA.

6) Don't not declare nfnetlink batch error list as static, since this
   may be used by several subsystems at the same time. Patch from
   Liping Zhang.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from Eric Dumazet and our team
to the mlx4 Core and Eth drivers.

Series generated against net commit:
eee2faab tcp: account for ts offset only if tsecr not zero

v3:
* Rebased, conflict solved.

v2:
* Added Eric's fix (patch 5/5).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or we might miss the fact that a page was allocated from memory reserves.

Fixes: dceeab0e ("mlx4: support __GFP_MEMALLOC for rx")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When creating EQs to handle CQ completion events for the PF
or for VFs, we create enough EQE entries to handle completions
for the max number of CQs that can use that EQ.

When SRIOV is activated, the max number of CQs a VF (or the PF) can
obtain is its CQ quota (determined by the Hypervisor resource tracker).
Therefore, when creating an EQ, the number of EQE entries that the VF
should request for that EQ is the CQ quota value (and not the total
number of CQs available in the FW).

Under SRIOV, the PF, also must use its CQ quota, because
the resource tracker also controls how many CQs the PF can obtain.

Using the FW total CQs instead of the CQ quota when creating EQs resulted
wasting MTT entries, due to allocating more EQEs than were needed.

Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spoofcheck can't be enabled if VF MAC is zero.
Vice versa, can't zero MAC if spoofcheck is on.

Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support')
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As ENOTSUPP is specific to NFS, change the return error value to
EOPNOTSUPP in various places in the mlx4 driver.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Suggested-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:198:2: error: unknown type name 'u8'
  u8 rx_traces;
/usr/include/linux/rds.h:199:2: error: unknown type name 'u8'
  u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX];
/usr/include/linux/rds.h:203:2: error: unknown type name 'u8'
  u8 rx_traces;
/usr/include/linux/rds.h:204:2: error: unknown type name 'u8'
  u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX];
/usr/include/linux/rds.h:205:2: error: unknown type name 'u64'
  u64 rx_trace[RDS_MSG_RX_DGRAM_TRACE_MAX];

Fixes: 3289025a ("RDS: add receive message trace used by application")
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include <linux/in6.h> in uapi/linux/seg6.h to fix the following
linux/seg6.h userspace compilation error:

/usr/include/linux/seg6.h:31:18: error: array type has incomplete element type 'struct in6_addr'
  struct in6_addr segments[0];

Include <linux/seg6.h> in uapi/linux/seg6_iptunnel.h to fix
the following linux/seg6_iptunnel.h userspace compilation error:

/usr/include/linux/seg6_iptunnel.h:26:21: error: array type has incomplete element type 'struct ipv6_sr_hdr'
  struct ipv6_sr_hdr srh[0];

Fixes: a50a05f4 ("ipv6: sr: add missing Kbuild export for header files")
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Geert, remove the string so the user does not see this
config option. The option is explicitly selected only as a dependency of
in-kernel users.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Fixes: 44091d29 ("lib: Introduce priority array area manager")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a void function, it is not necessary to append a return statement in it.
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in verbose log message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include <linux/if.h> to fix the following linux/llc.h userspace
compilation error:

/usr/include/linux/llc.h:26:27: error: 'IFHWADDRLEN' undeclared here (not in a function)
  unsigned char   sllc_mac[IFHWADDRLEN];
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include <linux/if.h> and <linux/in6.h> to fix the following
linux/ip6_tunnel.h userspace compilation errors:

/usr/include/linux/ip6_tunnel.h:23:12: error: 'IFNAMSIZ' undeclared here (not in a function)
  char name[IFNAMSIZ]; /* name of tunnel device */
/usr/include/linux/ip6_tunnel.h:30:18: error: field 'laddr' has incomplete type
  struct in6_addr laddr; /* local tunnel end-point address */
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox mlx5e fixes for 4.11-rc1

This series includes some important bug fixes for mlx5e driver.

Three misc fixes:
From Mohamad, compilation fix on s390 system
From Me, A fix for driver unload when switchdev mode is on.
From Tariq, HW LRO frag size optimization for when build_skb is not used
(striding RQ mode).

Three CQE compression related fixes:
Two fixes from Tariq and I, to correctly setup CQE compression
parameters on driver load and on arbitrary user modifications.
Last patch, fixes a very critical issue that was originally reported
by Tom, where the driver reported csum errors or even page ref issues
for when cqe compression is enabled and rapidly active.

For your convenience this series was generated on top of net-next branch:
005c3490 ('Revert "ath10k: Search SMBIOS for OEM board file extension"')

for -stable:
net/mlx5e: Register/unregister vport representors on interface (for kernel >= 4.9)
net/mlx5e: Do not reduce LRO WQE size when not using build_skb (for kernel >= 4.9)
net/mlx5e: Fix broken CQE compression initialization (for kernel >= 4.9)
net/mlx5e: Update MPWQE stride size when modifying CQE compress state (for kernel >= 4.7)
net/mlx5e: Fix wrong CQE decompression (for kernel >= 4.7)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In cqe compression with striding RQ, the decompression of the CQE field
wqe_counter was done with a wrong wraparound value.
This caused handling cqes with a wrong pointer to wqe (rx descriptor)
and creating SKBs with wrong data, pointing to wrong (and already consumed)
strides/pages.

The meaning of the CQE field wqe_counter in striding RQ holds the
stride index instead of the WQE index. Hence, when decompressing
a CQE, wqe_counter should have wrapped-around the number of strides
in a single multi-packet WQE.

We dropped this wrap-around mask at all in CQE decompression of striding
RQ. It is not needed as in such cases the CQE compression session would
break because of different value of wqe_id field, starting a new
compression session.

Tested:
 ethtool -K ethxx lro off/on
 ethtool --set-priv-flags ethxx rx_cqe_compress on
 super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D
 verified no csum errors and no page refcount issues.

Fixes: 7219ab34 ("net/mlx5e: CQE compression")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NTom Herbert <tom@herbertland.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the admin enables/disables cqe compression, updating
mpwqe stride size is required:
    CQE compress ON  ==> stride size = 256B
    CQE compress OFF ==> stride size = 64B

This is already done on driver load via mlx5e_set_rq_type_params, all we
need is just to call it on arbitrary admin changes of cqe compression
state via priv flags or when changing timestamping state
(as it is mutually exclusive with cqe compression).

This bug introduces no functional damage, it only makes cqe compression
occur less often, since in ConnectX4-LX CQE compression is performed
only on packets smaller than stride size.

Tested:
 ethtool --set-priv-flags ethxx rx_cqe_compress on
 pktgen with  64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6)
 verify `ethtool -S ethxx | grep compress` are advancing more often
 (rapidly)

Fixes: 7219ab34 ("net/mlx5e: CQE compression")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of RQ type parameters are derived from CQE compression state flag,
CQE compression flag was initialized only after RQ type parameters
setup. This leads to load RQ with stride size smaller than what we
want for when CQE compression is on.

This bug introduces no functional damage, it only makes CQE compression
occur less often, since in ConnectX4-LX CQE compression is performed
only on packets smaller than stride size.

Fix this by marking default status of CQE compression in PFLAG prior to
calling mlx5e_set_rq_priv_params(), as it inits some fields based on it.

Tested:
 load driver on systems where rx CQE compress will be on (MH)
 pktgen with  64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6)
 verify `ethtool -S ethxx | grep compress` are advancing more often
 (rapidly)

Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When rq_type is Striding RQ, no room of SKB_RESERVE is needed
as SKB allocation is not done via build_skb.

Fixes: e4b85508 ("net/mlx5e: Slightly reduce hardware LRO size")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently vport representors are added only on driver load and removed on
driver unload.  Apparently we forgot to handle them when we added the
seamless reset flow feature.  This caused to leave the representors
netdevs alive and active with open HW resources on pci shutdown and on
error reset flows.

To overcome this we move their handling to interface attach/detach, so
they would be cleaned up on shutdown and recreated on reset flows.

Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add necessary headers include for s390 arch compilation.

Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files")
Fixes: d605d668 ("net/mlx5e: Add support for ethtool self..")
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>