Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "We sometimes collect non-critical fixes that come in during the later
  part of the merge window in a branch for the next release instead, and
  this is that contents for v4.11.

  Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
  and setup. There's also some fixes for Davinci and a Kconfig fix for
  SCPI to only enable on ARM{,64}"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  firmware: arm_scpi: Add hardware dependencies
  ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  ARM: dts: Fix compatible for ti81xx uarts for 8250
  ARM: dts: Fix am335x and dm814x scm syscon to probe children
  ARM: OMAP2+: Fix init for multiple quirks for the same SoC
  ARM: dts: Fix omap3 off mode pull defines
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix

arch/arm/boot/dts/am33xx.dtsi

@@ -145,10 +145,11 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;

arch/arm/boot/dts/dm814x.dtsi

@@ -252,7 +252,7 @@
 			};
 
 			uart1: uart@20000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart1";
 				reg = <0x20000 0x2000>;
 				clock-frequency = <48000000>;
@@ -262,7 +262,7 @@
 			};
 
 			uart2: uart@22000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart2";
 				reg = <0x22000 0x2000>;
 				clock-frequency = <48000000>;
@@ -272,7 +272,7 @@
 			};
 
 			uart3: uart@24000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart3";
 				reg = <0x24000 0x2000>;
 				clock-frequency = <48000000>;
@@ -332,10 +332,11 @@
 				ranges = <0 0x140000 0x20000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;

arch/arm/boot/dts/dm816x.dtsi

@@ -373,7 +373,7 @@
 		};
 
 		uart1: uart@48020000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
@@ -383,7 +383,7 @@
 		};
 
 		uart2: uart@48022000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
@@ -393,7 +393,7 @@
 		};
 
 		uart3: uart@48024000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;

arch/arm/mach-davinci/da850.c

@@ -563,7 +563,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci_da850",		NULL,		&sata_clk),
+	CLK("ahci_da850",	NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK(NULL,		NULL,		&ehrpwm_clk),
 	CLK("ehrpwm.0",		"fck",		&ehrpwm0_clk),
@@ -1194,14 +1194,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index)
 	return clk_set_rate(pllclk, index);
 }
 
-static int da850_set_pll0rate(struct clk *clk, unsigned long index)
+static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
 {
-	unsigned int prediv, mult, postdiv;
-	struct da850_opp *opp;
 	struct pll_data *pll = clk->pll_data;
+	struct cpufreq_frequency_table *freq;
+	unsigned int prediv, mult, postdiv;
+	struct da850_opp *opp = NULL;
 	int ret;
 
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
+	rate /= 1000;
+
+	for (freq = da850_freq_table;
+	     freq->frequency != CPUFREQ_TABLE_END; freq++) {
+		/* rate is in Hz, freq->frequency is in KHz */
+		if (freq->frequency == rate) {
+			opp = (struct da850_opp *)freq->driver_data;
+			break;
+		}
+	}
+
+	if (!opp)
+		return -EINVAL;
+
 	prediv = opp->prediv;
 	mult = opp->mult;
 	postdiv = opp->postdiv;

arch/arm/mach-omap2/id.c

@@ -223,7 +223,15 @@ static void __init omap3_cpuinfo(void)
 	 * and CPU class bits.
 	 */
 	if (soc_is_omap3630()) {
-		cpu_name = "OMAP3630";
+		if (omap3_has_iva() && omap3_has_sgx()) {
+			cpu_name = (omap3_has_isp()) ? "OMAP3630/DM3730" : "OMAP3621";
+		} else if (omap3_has_iva()) {
+			cpu_name = "DM3725";
+		} else if (omap3_has_sgx()) {
+			cpu_name = "OMAP3615/AM3715";
+		} else {
+			cpu_name = (omap3_has_isp()) ? "AM3703" : "OMAP3611";
+		}
 	} else if (soc_is_am35xx()) {
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (soc_is_ti816x()) {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1748,6 +1748,7 @@ static struct omap_hwmod omap54xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1763,6 +1764,7 @@ static struct omap_hwmod omap54xx_uart2_hwmod = {
 	.name		= "uart2",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1778,7 +1780,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= DEBUG_OMAP4UART3_FLAGS,
+	.flags		= DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1794,7 +1796,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= DEBUG_OMAP4UART4_FLAGS,
+	.flags		= DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1810,6 +1812,7 @@ static struct omap_hwmod omap54xx_uart5_hwmod = {
 	.name		= "uart5",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1825,6 +1828,7 @@ static struct omap_hwmod omap54xx_uart6_hwmod = {
 	.name		= "uart6",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/pdata-quirks.c

@@ -599,7 +599,6 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 		if (of_machine_is_compatible(quirks->compatible)) {
 			if (quirks->fn)
 				quirks->fn();
-			break;
 		}
 		quirks++;
 	}

drivers/bus/da8xx-mstpri.c

@@ -4,7 +4,7 @@
  * Copyright (C) 2016 BayLibre SAS
  *
  * Author:
- *   Bartosz Golaszewski <bgolaszewski@baylibre.com.com>
+ *   Bartosz Golaszewski <bgolaszewski@baylibre.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

drivers/cpufreq/davinci-cpufreq.c

@@ -55,7 +55,7 @@ static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
 			return ret;
 	}
 
-	ret = clk_set_rate(armclk, idx);
+	ret = clk_set_rate(armclk, new_freq * 1000);
 	if (ret)
 		return ret;
 

drivers/firmware/Kconfig

@@ -21,6 +21,7 @@ config ARM_PSCI_CHECKER
 
 config ARM_SCPI_PROTOCOL
 	tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
+	depends on ARM || ARM64 || COMPILE_TEST
 	depends on MAILBOX
 	help
 	  System Control and Power Interface (SCPI) Message Protocol is

include/dt-bindings/pinctrl/omap.h

@@ -45,8 +45,8 @@
 #define PIN_OFF_NONE		0
 #define PIN_OFF_OUTPUT_HIGH	(OFF_EN | OFFOUT_EN | OFFOUT_VAL)
 #define PIN_OFF_OUTPUT_LOW	(OFF_EN | OFFOUT_EN)
-#define PIN_OFF_INPUT_PULLUP	(OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
-#define PIN_OFF_INPUT_PULLDOWN	(OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_INPUT_PULLUP	(OFF_EN | OFFOUT_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN	(OFF_EN | OFFOUT_EN | OFF_PULL_EN)
 #define PIN_OFF_WAKEUPENABLE	WAKEUP_EN
 
 /*