1. 16 3月, 2011 3 次提交
  2. 04 3月, 2011 14 次提交
  3. 03 3月, 2011 2 次提交
    • S
      OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver · b3329a33
      Shweta Gulati 提交于
      This Patch frees all the dynamically allocated memory
      which couldn't have been released in some error hitting cases.
      Signed-off-by: NShweta Gulati <shweta.gulati@ti.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      b3329a33
    • A
      arm: mach-omap2: smartreflex: fix another memory leak · 865212ab
      Aaro Koskinen 提交于
      Temporary strings with volt_* file names should be released after the
      debugfs entries are created. While at it, also simplify the string
      allocation, and use just snprintf() to create the name.
      
      The patch eliminates kmemleak reports with the following stack trace
      (multiple objects depending on HW):
      
      unreferenced object 0xcedbc5a0 (size 64):
        comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
        hex dump (first 32 bytes):
          76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00  volt_975000.....
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
        backtrace:
          [<c012fee0>] create_object+0x104/0x208
          [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
          [<c0013f64>] omap_sr_probe+0x314/0x420
          [<c02a1724>] platform_drv_probe+0x18/0x1c
          [<c02a088c>] driver_probe_device+0xc8/0x188
          [<c02a09b4>] __driver_attach+0x68/0x8c
          [<c02a00ac>] bus_for_each_dev+0x44/0x74
          [<c029f9e0>] bus_add_driver+0xa0/0x228
          [<c02a0cac>] driver_register+0xa8/0x130
          [<c02a1b2c>] platform_driver_probe+0x18/0x8c
          [<c0013c1c>] sr_init+0x40/0x74
          [<c005a554>] do_one_initcall+0xc8/0x1a0
          [<c00084f4>] kernel_init+0x150/0x218
          [<c0065d64>] kernel_thread_exit+0x0/0x8
          [<ffffffff>] 0xffffffff
      Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      865212ab
  4. 01 3月, 2011 4 次提交
    • A
      davinci: cpufreq: fix section mismatch warning · 079db590
      Axel Lin 提交于
      Fix below section mismatch warning:
      WARNING: vmlinux.o(.data+0x673c): Section mismatch in reference from the variable davinci_driver to the function .init.text:davinci_cpu_init()
      The variable davinci_driver references
      the function __init davinci_cpu_init()
      If the reference is valid then annotate the
      variable with __init* or __refdata (see linux/init.h) or name the variable:
      *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
      Signed-off-by: NAxel Lin <axel.lin@gmail.com>
      Acked-by: NSekhar Nori <nsekhar@ti.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      079db590
    • S
      DaVinci: fix compilation warnings in <mach/clkdev.h> · 3113307a
      Sergei Shtylyov 提交于
      Commit 6d803ba7 (ARM: 6483/1: arm & sh:
      factorised duplicated clkdev.c) caused the following warnings:
      
      In file included from /home/headless/src/kernel.org/linux-davinci/arch/arm/
      include/asm/clkdev.h:17,
                       from include/linux/clkdev.h:15,
                       from arch/arm/mach-davinci/clock.h:71,
                       from arch/arm/mach-davinci/common.c:22:
      arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: `struct clk' declared
      inside parameter list
      arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: its scope is only this
      definition or declaration, which is probably not what you want
      arch/arm/mach-davinci/include/mach/clkdev.h:9: warning: `struct clk' declared
      inside parameter list
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Acked-by: NSekhar Nori <nsekhar@ti.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      3113307a
    • H
      davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 · c284d9fa
      Hirosh Dabui 提交于
      This patch fix a bug in the register indexing for GPIOs numbers >  31
      to get the relevant hardware registers of tnetv107x to control the GPIOs.
      
      In the structure tnetv107x_gpio_regs:
      
      struct tnetv107x_gpio_regs {
                  u32     idver;
                  u32     data_in[3];
                  u32     data_out[3];
                  u32     direction[3];
                  u32     enable[3];
      };
      
      The GPIO hardware register addresses of tnetv107x are stored.
      The chip implements 3 registers of each entity to serve 96 GPIOs,
      each register provides a subset of 32 GPIOs.
      The driver provides these macros: gpio_reg_set_bit, gpio_reg_get_bit
      and gpio_reg_clear_bit.
      
      The bug implied the use of macros to access the relevant hardware
      register e.g. the driver code used the macro like this:
      'gpio_reg_clear_bit(&reg->data_out, gpio)'
      
      But it has to be used like this:
      'gpio_reg_clear_bit(reg->data_out, gpio)'.
      
      The different results are shown here:
      - &reg->data_out + 1 (it will add the full array size of data_out i.e. 12 bytes)
      - reg->data_out + 1 (it will increment only the size of data_out i.e. only 4 bytes)
      Acked-by: NCyril Chemparathy <cyril@ti.com>
      Signed-off-by: NHirosh Dabui <hirosh.dabui@snom.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      c284d9fa
    • R
      davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio · b3d1ffb2
      Rajashekhara, Sudhakar 提交于
      After the multi-component commit f0fba2ad (ASoC: multi-component - ASoC
      Multi-Component Support) for ASoC, we need to register the platform
      device for davinci-pcm-audio.
      
      This patch and patch at [1] are required for audio to work on
      DA850/OMAP-L138.
      
      [1] https://patchwork.kernel.org/patch/495211/Signed-off-by: NRajashekhara, Sudhakar <sudhakar.raj@ti.com>
      Signed-off-by: NKevin Hilman <khilman@ti.com>
      b3d1ffb2
  5. 27 2月, 2011 3 次提交
  6. 26 2月, 2011 6 次提交
  7. 25 2月, 2011 1 次提交
    • P
      OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER · cbc94380
      Paul Walmsley 提交于
      
      OMAP2+ kernels built without CONFIG_OMAP_32K_TIMER crash on boot after the
      2.6.38 sched_clock changes:
      
      [    0.000000] OMAP clockevent source: GPTIMER1 at 13000000 Hz
      [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
      [    0.000000] pgd = c0004000
      [    0.000000] [00000000] *pgd=00000000
      [    0.000000] Internal error: Oops: 80000005 [#1] SMP
      [    0.000000] last sysfs file:
      [    0.000000] Modules linked in:
      [    0.000000] CPU: 0    Not tainted  (2.6.38-rc5-00057-g04aa67de #152)
      [    0.000000] PC is at 0x0
      [    0.000000] LR is at sched_clock_poll+0x2c/0x3c
      
      Without CONFIG_OMAP_32K_TIMER, the kernel has an clockevent and
      clocksource resolution about three orders of magnitude higher than
      with CONFIG_OMAP_32K_TIMER set.  The tradeoff is that the lowest
      power consumption states are not available.
      
      Fix by calling init_sched_clock() from the GPTIMER clocksource init code.
      Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      Signed-off-by: NTony Lindgren <tony@atomide.com>
      cbc94380
  8. 24 2月, 2011 1 次提交
  9. 23 2月, 2011 1 次提交
    • J
      OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL · ea68c00e
      John Ogness 提交于
      In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction
      Feature", it is shown that the internal frequency is calculated by
      CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is
      already "N+1" since Linux is using the values to divide by. In the
      technical reference manual, "N" is referring to the divider's register
      value (0-127).
      
      During power management testing, it was observed that programming the
      wrong jitter correction value can cause the system to become unstable
      and eventually crash.
      Signed-off-by: NJohn Ogness <john.ogness@linutronix.de>
      [paul@pwsan.com: added second paragraph to commit message]
      Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      ea68c00e
  10. 22 2月, 2011 5 次提交