提交 6a53048d 编写于 作者: L Lars-Peter Clausen 提交者: Kukjin Kim

ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02

The gta02 header file still uses the old S3C2410_GPJx defines instead of the
S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed
this causes the following build failure:

	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk':
	sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once
	sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.)
	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk':
	sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event':
	sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c: At top level:
	sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function)
	sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function)

This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g
on the file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 f33f3149
......@@ -44,19 +44,19 @@
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册