Nikolay Aleksandrov says:

====================
net: bridge: export vlan stats per-port with flags

This set adds the ability to export vlan stats per-port. Patch 01 makes
that possible by consolidating the bridge and port linkxstats calls. Then
patch 02 allows to dump the vlan entry flags in order to be able to
distinguish between bridge and port vlan entries when dumping the master
device vlan stats. That is needed because that call was implemented when
the stats API didn't have slave dumping capabilities and it dumps all vlan
stats (for both bridge and port entries). We also need it in order to print
the vlan flags when dumping the stats.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use one of the vlan xstats padding fields to export the vlan flags. This is
needed in order to be able to distinguish between master (bridge) and port
vlan entries in user-space when dumping the bridge vlan stats.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the bridge driver we usually have the same function working for both
port and bridge. In order to follow that logic and also avoid code
duplication, consolidate the bridge_ and brport_ linkxstats calls into
one since they share most of their code. As a side effect this allows us
to dump the vlan stats also via the slave call which is in preparation for
the upcoming per-port vlan stats and vlan flag dumping.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hadar Hen Zion says:

====================
net_sched, flow_dissector, flower: Introduce vlan tag support

This patchset introduce vlan tag support to the flower classifier and the flow
dissector. In addition to adding vlan priority to act vlan.

The first 2 patches are dealing with flow-dissector:
 - The first patch is a fix, in case the vlan was already stripped from the
   skb, take it from skb->vlan_tci.
 - The second patch adds support for vlan priority.

The next 2 patches are dealing with flower:
 - The first patch is a fix, sets flow dissector 'used_keys' according to the
   mask value of each key.
 - The secound patch adds vlan tag support to the flower classifier, user space
   patches will be sent later to complete it.

The last patch adds vlan priority to act vlan since only vlan id is currently supported.

Changes from V1:
 - A new patch was added to this series "net_sched: flower: Avoid dissection of unmasked keys"
 - Adding u16 padding to struct flow_dissector_key_vlan
 - change flow_label field in struct flow_dissector_key_tags form 20 bits field to u32
 - Remove 'if (v->tcfv_push_prio)' check from tcf_vlan_dump function
 - Add support to un-stripped vlan skb and skb with multipale vlans in __skb_flow_dissect
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current vlan push action supports only vid and protocol options.
Add priority option.

Example script that adds vlan push action with vid and
priority:

tc filter add dev veth0 protocol ip parent ffff: \
	   flower \
	   	indev veth0 \
	   action vlan push id 100 priority 5
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enhance flower to support 802.1Q vlan protocol classification.
Currently, the supported fields are vlan_id and vlan_priority.

Example:

	# add a flower filter with vlan id and priority classification
	tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
		flower \
		indev ens4f0 \
		vlan_ethtype ipv4 \
		vlan_id 100 \
		vlan_prio 3 \
	action vlan pop
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current flower implementation checks the mask range and set all the
keys included in that range as "used_keys", even if a specific key in
the range has a zero mask.

This behavior can cause a false positive return value of
dissector_uses_key function and unnecessary dissection in
__skb_flow_dissect.

This patch checks explicitly the mask of each key and "used_keys" will
be set accordingly.

Fixes: 77b9900e ('tc: introduce Flower classifier')
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add vlan priority check to the flow dissector by adding new flow
dissector struct, flow_dissector_key_vlan which includes vlan tag
fields.

vlan_id and flow_label fields were under the same struct
(flow_dissector_key_tags). It was a convenient setting since struct
flow_dissector_key_tags is used by struct flow_keys and by setting
vlan_id and flow_label under the same struct, we get precisely 24 or 48
bytes in flow_keys from flow_dissector_key_basic.

Now, when adding vlan priority support, the code will be cleaner if
flow_label and vlan tag won't be under the same struct anymore.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Early in the datapath skb_vlan_untag function is called, stripped
the vlan from the skb and set skb->vlan_tci and skb->vlan_proto fields.

The current dissection doesn't handle stripped vlan packets correctly.
In some flows, vlan doesn't exist in skb->data anymore when applying
flow dissection on the skb, fix that.

In case vlan info wasn't stripped before applying flow_dissector (RPS
flow for example), or in case of skb with multiple vlans (e.g. 802.1ad),
get the vlan info from skb->data. The flow_dissector correctly skips
any number of vlans and stores only the first level vlan.

Fixes: 0744dd00 ('net: introduce skb_flow_dissect()')
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qed*: Fix ethtool issues relating to link

This series addresses two issues that were introduced when adding
support for ethtool's link_ksettings support - the first fixes a
regression and second incorrect functionallity in the submission.

Although these are fixes, as the feature currently exists only in
'next-next' I'm aiming them for it.

Dave, please consider applying this series to 'net-next'.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While '0xdead' and '0xbeef' are "great" values, we should
use the correct SPEED_* values instead.

Fixes: 054c67d1 ("qed*: Add support for ethtool link_ksettings callbacks")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When moving into using ethtool's link_ksetting, qed started
supplying its own bitmask of speed/capabilities, but qede
is still checking for the SUPPORTED value to determine whether
it supports pause.

Fixes: 054c67d1 ("qed*: Add support for ethtool link_ksettings callbacks")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2016-08-18

This series contains updates to igb only.

Gangfeng Huang provides all the changes in the series to update the
igb driver to support advanced receive side filters that direct receive
packets by flows to different hardware queues. This enables a tight
control on routing a flow in the platform.  First patch allows for
receive network flow classification to insert and remove receive filters
by ethtool.  Second and third patches add the ability to insert and
remove ethertype and VLAN priority filters by ethtool.

Last patch just fixes an error message to return "Not supported" versus
"Unknown error 524".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use error "rmgr: Cannot insert RX class rule: Operation not supported" is
more meaningful than "rmgr: Cannot insert RX class rule: Unknown error 524"
Signed-off-by: NGangfeng Huang <gangfeng.huang@ni.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to allow for RX network flow classification to insert
and remove VLAN priority filter by ethtool

Example:
Add an VLAN priority filter:
$ ethtool -N eth0 flow-type ether vlan 0x6000 vlan-mask 0x1FFF action 2 loc 1

Show all filters:
$ ethtool -n eth0
4 RX rings available
Total 1 rules

Filter: 1
	Flow Type: Raw Ethernet
	Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Ethertype: 0x0 mask: 0xFFFF
	VLAN EtherType: 0x0 mask: 0xffff
	VLAN: 0x6000 mask: 0x1fff
	User-defined: 0x0 mask: 0xffffffffffffffff
	Action: Direct to queue 2

Delete the filter by location:
$ ethtool -N delete 1
Signed-off-by: NRuhao Gao <ruhao.gao@ni.com>
Signed-off-by: NGangfeng Huang <gangfeng.huang@ni.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to allow for RX network flow classification to insert
and remove ethertype filter by ethtool

Example:
Add an ethertype filter:
$ ethtool -N eth0 flow-type ether proto 0x88F8 action 2

Show all filters:
$ ethtool -n eth0
4 RX rings available
Total 1 rules

Filter: 15
	Flow Type: Raw Ethernet
	Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Ethertype: 0x88F8 mask: 0x0
	Action: Direct to queue 2

Delete the filter by location:
$ ethtool -N delete 15
Signed-off-by: NRuhao Gao <ruhao.gao@ni.com>
Signed-off-by: NGangfeng Huang <gangfeng.huang@ni.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to allow for RX network flow classification to insert
and remove Rx filter by ethtool. Ethtool interface has it's own rules
manager

Show all filters:
$ ethtool -n eth0
4 RX rings available
Total 2 rules
Signed-off-by: NRuhao Gao <ruhao.gao@ni.com>
Signed-off-by: NGangfeng Huang <gangfeng.huang@ni.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Jiri Kosina says:

====================
qdisc-hashtable fixes

The following two patches fix all the issues that have been reported
against the conversion of qdisc linked list to hashtable (currently in
net-next) so far.

First patch adjusts handling of singleton qdiscs to the new semantics, and
is rather straightforward.

The second patch, which fixes "cosmetic" issue of duplicate entries in the
qdisc dump for ingress qdiscs, is a little bit more hairy; I personally
would love to see all the already existing "if (ingress)"-like hacks go
away (by, let's say, introducing a general TCQ_F_? flag), but that's way
out of scope of this patchset (but already on my todo).

Thanks a lot to Daniel Borkmann and David Ahern for reporting the issues
and testing the patches promptly.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tc_dump_qdisc() performs dumping of the per-device qdiscs in two phases;
first, the "standard" dev->qdisc is being dumped. Second, if there is/are
ingress queue(s), they are being dumped as well.

After conversion of netdevice's qdisc linked-list into hashtable, these
two sets are not in two disjunctive sets/lists any more, but are both
"reachable" directly from netdevice's hashtable. As a consequence, the
"full-depth" dump of the ingress qdiscs results in immediately hitting the
netdevice hashtable again, and duplicating the dump that has already been
performed for dev->qdisc.
What in fact needs to be dumped in case of ingress queue is "just" the
top-level ingress qdisc, as everything else has been dumped already.

Fix this by extending tc_dump_qdisc_root() in a way that it can be instructed
whether it should (while performing the "full" per-netdev qdisc dump) perform
the whole recursion, or just dump "additional" top-level (ingress) qdiscs
without performing any kind of recursion.

This fixes duplicate dumps such as

	qdisc mq 0: root
	qdisc pfifo_fast 0: parent :4 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc clsact ffff: parent ffff:fff1
	qdisc pfifo_fast 0: parent :4 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
	qdisc pfifo_fast 0: parent :1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

Fixes: 59cc1f61 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qdisc_match_from_root() is now iterating over per-netdevice qdisc
hashtable instead of going through a linked-list of qdiscs (independently
on the actual underlying netdev), which was the case before the switch to
hashtable for qdiscs.

For singleton qdiscs, there is no underlying netdev associated though, and
therefore dumping a singleton qdisc will panic, as qdisc_dev(root) will
always be NULL.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000410
 IP: [<ffffffff8167efac>] qdisc_match_from_root+0x2c/0x70
 PGD 1aceba067 PUD 1aceb7067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP
[ ... ]
 task: ffff8801ec996e00 task.stack: ffff8801ec934000
 RIP: 0010:[<ffffffff8167efac>]  [<ffffffff8167efac>] qdisc_match_from_root+0x2c/0x70
 RSP: 0018:ffff8801ec937ab0  EFLAGS: 00010203
 RAX: 0000000000000408 RBX: ffff88025e612000 RCX: ffffffffffffffd8
 RDX: 0000000000000000 RSI: 00000000ffff0000 RDI: ffffffff81cf8100
 RBP: ffff8801ec937ab0 R08: 000000000001c160 R09: ffff8802668032c0
 R10: ffffffff81cf8100 R11: 0000000000000030 R12: 00000000ffff0000
 R13: ffff88025e612000 R14: ffffffff81cf3140 R15: 0000000000000000
 FS:  00007f24b9af6740(0000) GS:ffff88026f280000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000410 CR3: 00000001aceec000 CR4: 00000000001406e0
 Stack:
  ffff8801ec937ad0 ffffffff81681210 ffff88025dd51a00 00000000fffffff1
  ffff8801ec937b88 ffffffff81681e4e ffffffff81c42bc0 ffff880262431500
  ffffffff81cf3140 ffff88025dd51a10 ffff88025dd51a24 00000000ec937b38
 Call Trace:
  [<ffffffff81681210>] qdisc_lookup+0x40/0x50
  [<ffffffff81681e4e>] tc_modify_qdisc+0x21e/0x550
  [<ffffffff8166ae25>] rtnetlink_rcv_msg+0x95/0x220
  [<ffffffff81209602>] ? __kmalloc_track_caller+0x172/0x230
  [<ffffffff8166ad90>] ? rtnl_newlink+0x870/0x870
  [<ffffffff816897b7>] netlink_rcv_skb+0xa7/0xc0
  [<ffffffff816657c8>] rtnetlink_rcv+0x28/0x30
  [<ffffffff8168919b>] netlink_unicast+0x15b/0x210
  [<ffffffff81689569>] netlink_sendmsg+0x319/0x390
  [<ffffffff816379f8>] sock_sendmsg+0x38/0x50
  [<ffffffff81638296>] ___sys_sendmsg+0x256/0x260
  [<ffffffff811b1275>] ? __pagevec_lru_add_fn+0x135/0x280
  [<ffffffff811b1a90>] ? pagevec_lru_move_fn+0xd0/0xf0
  [<ffffffff811b1140>] ? trace_event_raw_event_mm_lru_insertion+0x180/0x180
  [<ffffffff811b1b85>] ? __lru_cache_add+0x75/0xb0
  [<ffffffff817708a6>] ? _raw_spin_unlock+0x16/0x40
  [<ffffffff811d8dff>] ? handle_mm_fault+0x39f/0x1160
  [<ffffffff81638b15>] __sys_sendmsg+0x45/0x80
  [<ffffffff81638b62>] SyS_sendmsg+0x12/0x20
  [<ffffffff810038e7>] do_syscall_64+0x57/0xb0

Fix this by special-casing singleton qdiscs (those that don't have
underlying netdevice) and introduce immediate handling of those rather
than trying to go over an underlying netdevice. We're in the same
situation in tc_dump_qdisc_root() and tc_dump_tclass_root().

Ultimately, this will have to be slightly reworked so that we are actually
able to show singleton qdiscs (noop) in the dump properly; but we're not
currently doing that anyway, so no regression there, and better do this in
a gradual manner.

Fixes: 59cc1f61 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NDaniel Borkmann <daniel@iogearbox.net>
Reported-by: NDavid Ahern <dsa@cumulusnetworks.com>
Tested-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: bearer and link improvements

The first commit makes it possible to set and check the 'blocked' state
of a bearer from the generic bearer layer. The second commit is a small
improvement to the link congestion mechanism.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a link is attempted woken up after congestion, it uses a different,
more generous criteria than when it was originally declared congested.
This has the effect that the link, and the sending process, sometimes
will be woken up unnecessarily, just to immediately return to congestion
when it turns out there is not not enough space in its send queue to
host the pending message. This is a waste of CPU cycles.

We now change the function link_prepare_wakeup() to use exactly the same
criteria as tipc_link_xmit(). However, since we are now excluding the
window limit from the wakeup calculation, and the current backlog limit
for the lowest level is too small to house even a single maximum-size
message, we have to expand this limit. We do this by evaluating an
alternative, minimum value during the setting of the importance limits.
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 5b7066c3 ("tipc: stricter filtering of packets in bearer
layer") we introduced a method of filtering out messages while a bearer
is being reset, to avoid that links may be re-created and come back in
working state while we are still in the process of shutting them down.

This solution works well, but is limited to only work with L2 media, which
is insufficient with the increasing use of UDP as carrier media.

We now replace this solution with a more generic one, by introducing a
new flag "up" in the generic struct tipc_bearer. This field will be set
and reset at the same locations as with the previous solution, while
the packet filtering is moved to the generic code for the sending side.
On the receiving side, the filtering is still done in media specific
code, but now including the UDP bearer.
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Add support for additional statistics.

The patch series adds qed/qede support for new statistics.
Patch (1) adds couple of statistcs for "ethtool -S" display.
Patch (2) adds support for per-queue statistics to ethtool display.
Patch (3) adds qed support for NCSI statistics.

Please consider applying this to 'net-next' branch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds driver support for sending the NCSI statistics to the
MFW. This is an asynchronous request from MFW. Upon receiving this, driver
populates the required data and send it to MFW.
Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds driver support for capturing stats ttl0_discard and
packet_too_big_discard in "ethtool -S" display.
Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev->name is a char array of IFNAMSIZ elements, hence can never be
null, so the null pointer check is redundant. Remove it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For implementing this driver most of the inputs is
provided by Andrew Lunn.

Updating the driver with Andrew Copy right.
Signed-off-by: NKedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the platforms like zynqmp ultrascale+ has a
separate clock gate for the rx clock. Add an optional
rx_clk so that the clock can be enabled.
Signed-off-by: NShubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-08-18

This series contains updates to i40e and i40evf only.

Wei Yongjun updates i40e to use list_move() instead of list_del() &
list_add() operations.

Anjali fixes an issue where the client->open call was not protected with
the client instance mutex, which allowed client->close to be called before
the open all completed.

Catherine makes sure that the VLAN count (and stats) gets reset to 0
after reset.

Jake provides two patches, first adds the needed rtnl lock around
i40evf_set_interrupt_capability() since i40evf_init_task() does not
hold the rtnl_lock.  Second fixes an issue where users could reduce
the number of channels (queues) below the current flow director
filter rules targets.

Dave fixes a problem where a static analysis tool generates a warning
so eliminating the irrelevant check and redundant assignment for the
value of enabled_tc.

Avinash fixes an sync issue where the iWARP device open is called
before the PCI register writes are completed, so ensure the register
writes complete before exiting the setup function.

Alan fixes a bug which causes RSS to continue to work after being
disabled.

Carolyn implements a feature change which allows using ethtool to set
RDD hash options using less than four parameters if desired.

Dan Carpenter cleans up a stray unlock.

Sridhar exposes the "trust" flag to userspace via ndo_get_vf_config().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables
	ip -d l
to indicate if trust is on or off for VFs.
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We shifted the locking around a bit but forgot to delete this unlock so
now it can unlock twice.

Fixes: cd3be169 ('i40e: Move the mutex lock in i40e_client_unregister')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NBimmy Pujari <Bimmy.pujari@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements a feature change which allows using ethtool to set
RSS hash opts using less than four parameters if desired.

Change-ID: I0fbb91255d81e997c456697c21ac39cc9754821b
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When we allocate memory, we must free it. It's simple courtesy.

Change-ID: Id007294096fb53344f1a8b9a0f78eddf9853c5d6
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the bug which causes RSS to continue to work
after being disabled.  After disabling RSS, traffic would continue
to be assigned to different queues instead of falling back to a
single queue. Without this patch, attempting to disable RSS would
not work as expected. This patch fixes the bug by clearing the
lookup table used by RSS such that all traffic is assigned to a
single queue.  This patch also addresses the issue of reinstating
 the lookup table should RSS then be re-enabled.

Change-ID: Ib20c7c6a7e9f1f772bb787370f8a8c664796b141
Signed-off-by: NAlan Brady <alan.brady@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

VF goes through reset path during VF creation which happens to also
have notification of VF reset to client. Adding conditional check to
avoid wrongly notifying VF reset during VF creation.

Also changing the call order of VF enable, calling it after VF creation
rather than before.

Change-ID: I96eabd99deae746a2f0fc465194c886f196178ce
Signed-off-by: NAvinash Dayanand <avinash.dayanand@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is a fix for the bug i.e. unable to create iwarp device
in VF. This is a sync issue and the iwarp device open is called even
before the PCI register writes are done.

Forcing the PCI register writes to happen just before it exits the
function.

Change-ID: I60c6a2c709da89e845f2764cc50ce8b7373c8c44
Signed-off-by: NAvinash Dayanand <avinash.dayanand@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If a driver is unable to maintain all current user supplied settings
from ethtool (or other sources), it is not ok for a user request to
succeed and silently trample over previous configuration.

To that end, if you change the number of channels, it must not be
allowed to reduce the number of channels (queues) below the current
flow director filter rules targets. In this case, return -EINVAL when
a request to reduce the number of channels would do so. In addition
log a warning to the kernel buffer explaining why we failed, and report
the rules which prevent us from lowering the number of channels.

Change-ID: If41464d63d7aab11cedf09e4f3aa1a69e21ffd88
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>