提交 7a277a96 编写于 作者: G Gangfeng Huang 提交者: Jeff Kirsher

igb: support RX flow classification by VLAN priority

This patch is meant to allow for RX network flow classification to insert
and remove VLAN priority filter by ethtool

Example:
Add an VLAN priority filter:
$ ethtool -N eth0 flow-type ether vlan 0x6000 vlan-mask 0x1FFF action 2 loc 1

Show all filters:
$ ethtool -n eth0
4 RX rings available
Total 1 rules

Filter: 1
	Flow Type: Raw Ethernet
	Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
	Ethertype: 0x0 mask: 0xFFFF
	VLAN EtherType: 0x0 mask: 0xffff
	VLAN: 0x6000 mask: 0x1fff
	User-defined: 0x0 mask: 0xffffffffffffffff
	Action: Direct to queue 2

Delete the filter by location:
$ ethtool -N delete 1
Signed-off-by: NRuhao Gao <ruhao.gao@ni.com>
Signed-off-by: NGangfeng Huang <gangfeng.huang@ni.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 64c75d41
......@@ -1024,4 +1024,8 @@
#define E1000_RTTBCNRC_RF_INT_MASK \
(E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
#define E1000_VLAPQF_QUEUE_SEL(_n, q_idx) (q_idx << ((_n) * 4))
#define E1000_VLAPQF_P_VALID(_n) (0x1 << (3 + (_n) * 4))
#define E1000_VLAPQF_QUEUE_MASK 0x03
#endif
......@@ -309,6 +309,7 @@
(0x054E0 + ((_i - 16) * 8)))
#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
(0x054E4 + ((_i - 16) * 8)))
#define E1000_VLAPQF 0x055B0 /* VLAN Priority Queue Filter VLAPQF */
#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
......
......@@ -368,6 +368,7 @@ struct hwmon_buff {
enum igb_filter_match_flags {
IGB_FILTER_FLAG_ETHER_TYPE = 0x1,
IGB_FILTER_FLAG_VLAN_TCI = 0x2,
};
#define IGB_MAX_RXNFC_FILTERS 16
......@@ -377,9 +378,11 @@ struct igb_nfc_input {
/* Byte layout in order, all values with MSB first:
* match_flags - 1 byte
* etype - 2 bytes
* vlan_tci - 2 bytes
*/
u8 match_flags;
__be16 etype;
__be16 vlan_tci;
};
struct igb_nfc_filter {
......
......@@ -2449,11 +2449,18 @@ static int igb_get_ethtool_nfc_entry(struct igb_adapter *adapter,
if (!rule || fsp->location != rule->sw_idx)
return -EINVAL;
if (rule->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE) {
if (rule->filter.match_flags) {
fsp->flow_type = ETHER_FLOW;
fsp->ring_cookie = rule->action;
fsp->h_u.ether_spec.h_proto = rule->filter.etype;
fsp->m_u.ether_spec.h_proto = ETHER_TYPE_FULL_MASK;
if (rule->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE) {
fsp->h_u.ether_spec.h_proto = rule->filter.etype;
fsp->m_u.ether_spec.h_proto = ETHER_TYPE_FULL_MASK;
}
if (rule->filter.match_flags & IGB_FILTER_FLAG_VLAN_TCI) {
fsp->flow_type |= FLOW_EXT;
fsp->h_ext.vlan_tci = rule->filter.vlan_tci;
fsp->m_ext.vlan_tci = htons(VLAN_PRIO_MASK);
}
return 0;
}
return -EINVAL;
......@@ -2697,12 +2704,46 @@ static int igb_rxnfc_write_etype_filter(struct igb_adapter *adapter,
return 0;
}
int igb_rxnfc_write_vlan_prio_filter(struct igb_adapter *adapter,
struct igb_nfc_filter *input)
{
struct e1000_hw *hw = &adapter->hw;
u8 vlan_priority;
u16 queue_index;
u32 vlapqf;
vlapqf = rd32(E1000_VLAPQF);
vlan_priority = (ntohs(input->filter.vlan_tci) & VLAN_PRIO_MASK)
>> VLAN_PRIO_SHIFT;
queue_index = (vlapqf >> (vlan_priority * 4)) & E1000_VLAPQF_QUEUE_MASK;
/* check whether this vlan prio is already set */
if ((vlapqf & E1000_VLAPQF_P_VALID(vlan_priority)) &&
(queue_index != input->action)) {
dev_err(&adapter->pdev->dev, "ethtool rxnfc set vlan prio filter failed.\n");
return -EEXIST;
}
vlapqf |= E1000_VLAPQF_P_VALID(vlan_priority);
vlapqf |= E1000_VLAPQF_QUEUE_SEL(vlan_priority, input->action);
wr32(E1000_VLAPQF, vlapqf);
return 0;
}
int igb_add_filter(struct igb_adapter *adapter, struct igb_nfc_filter *input)
{
int err = -EINVAL;
if (input->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE)
if (input->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE) {
err = igb_rxnfc_write_etype_filter(adapter, input);
if (err)
return err;
}
if (input->filter.match_flags & IGB_FILTER_FLAG_VLAN_TCI)
err = igb_rxnfc_write_vlan_prio_filter(adapter, input);
return err;
}
......@@ -2722,11 +2763,33 @@ static void igb_clear_etype_filter_regs(struct igb_adapter *adapter,
adapter->etype_bitmap[reg_index] = false;
}
static void igb_clear_vlan_prio_filter(struct igb_adapter *adapter,
u16 vlan_tci)
{
struct e1000_hw *hw = &adapter->hw;
u8 vlan_priority;
u32 vlapqf;
vlan_priority = (vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
vlapqf = rd32(E1000_VLAPQF);
vlapqf &= ~E1000_VLAPQF_P_VALID(vlan_priority);
vlapqf &= ~E1000_VLAPQF_QUEUE_SEL(vlan_priority,
E1000_VLAPQF_QUEUE_MASK);
wr32(E1000_VLAPQF, vlapqf);
}
int igb_erase_filter(struct igb_adapter *adapter, struct igb_nfc_filter *input)
{
if (input->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE)
igb_clear_etype_filter_regs(adapter,
input->etype_reg_index);
if (input->filter.match_flags & IGB_FILTER_FLAG_VLAN_TCI)
igb_clear_vlan_prio_filter(adapter,
ntohs(input->filter.vlan_tci));
return 0;
}
......@@ -2808,15 +2871,28 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
if ((fsp->flow_type & ~FLOW_EXT) != ETHER_FLOW)
return -EINVAL;
if (fsp->m_u.ether_spec.h_proto != ETHER_TYPE_FULL_MASK)
if (fsp->m_u.ether_spec.h_proto != ETHER_TYPE_FULL_MASK &&
fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK))
return -EINVAL;
input = kzalloc(sizeof(*input), GFP_KERNEL);
if (!input)
return -ENOMEM;
input->filter.etype = fsp->h_u.ether_spec.h_proto;
input->filter.match_flags = IGB_FILTER_FLAG_ETHER_TYPE;
if (fsp->m_u.ether_spec.h_proto == ETHER_TYPE_FULL_MASK) {
input->filter.etype = fsp->h_u.ether_spec.h_proto;
input->filter.match_flags = IGB_FILTER_FLAG_ETHER_TYPE;
}
if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) {
if (fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) {
err = -EINVAL;
goto err_out;
}
input->filter.vlan_tci = fsp->h_ext.vlan_tci;
input->filter.match_flags |= IGB_FILTER_FLAG_VLAN_TCI;
}
input->action = fsp->ring_cookie;
input->sw_idx = fsp->location;
......@@ -2843,6 +2919,7 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
err_out_w_lock:
spin_unlock(&adapter->nfc_lock);
err_out:
kfree(input);
return err;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册