- 09 4月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Currently we allow all DAPM contexts to determine their own bias level. While this should in general work in most situations and will deliver the lowest possible power it causes problems for our integration with the card bias level as we're calling the card bias level functions for each DAPM context even though they're card wide but don't say which CODEC we're calling them for. Mitigate against this by forcing everything to be in the same state. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
- 08 4月, 2011 6 次提交
-
-
由 Mark Brown 提交于
Since we recently explicitly set the register for registerless widgets to no register there is no longer any need to special case power updates for them, we can allow them to be handled with the register compression code as other widgets are. As this is the only remaining user of dapm_generic_apply_power() and dapm_update_bits() also remove those functions. Noticed-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Add several include files to fix the below compile error. drivers/staging/intel_sst/intelmid.c: In function ‘snd_intelmad_sst_register’: drivers/staging/intel_sst/intelmid.c:805:2: error: ‘sst_drv_ctx’ undeclared (first use in this function) drivers/staging/intel_sst/intelmid.c:805:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Mike Frysinger 提交于
The ssm2602 codec has a SPI interface as well as I2C, so add the simple bit of glue to make it usable. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Allow CODEC and card drivers to point to an array of controls from their driver structure rather than explicitly calling snd_soc_add_controls(). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dilan Lee 提交于
Update the headphone and line out mixers and PGAs use the same logical set of register bits and sequencing as the speaker mixer/PGA. This allows ALSA controls for mute and volume on headphone and line out to operate correctly. Per conversation on alsa-devel, earlier datasheets indicated that the POWER_MANAGEMENT_* register bits 0 and 1 were aliases to ANALOG_* register bits 0 and 4, and hence only one copy of those bits was programmed. However, later datasheets corrected this. From: Dilan Lee <dilee@nvidia.com> [swarren: Applied same change to headphone widgets] Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 4月, 2011 4 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Ensures that we apply volume updates that don't affect the right channel. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
initialize ret to invalid value so that when we reach the config error path in soc_pcm_open, it will return the correct error code. without this patch, though config error path is executed, soc_pcm_open will return 0 in snd_pcm_open_substream and then cause double release of substream. Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Suppose we have: cpu_dai channels_min = 1 channels_max = 1 codec_dai channels_min = 2 channels_max = 2 This is a mismatch that should not happen, however according to the current code, the result of runtime->hw will be: channels_min = 2 channels_max = 1 We better spot it early. This patch checks this mismatch. Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 4月, 2011 7 次提交
-
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
register_sst_card is used in ASoC code with field `scard_ops` being NULL. Without this patch, there will be NULL dereference. Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
module_name will be checked in register_sst_card. It will fail to register sst card if it's not initialized. Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Hsiang 提交于
This patch adds the MAX98095 CODEC driver. Signed-off-by: NPeter Hsiang <peter.hsiang@maxim-ic.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Stephen Warren 提交于
ASoC machine drivers that are their own platform_driver (as opposed to those using the soc-audio platform_driver) need to explicitly set up power-management operation callbacks. To avoid cut/paste, snd_soc_pm_ops also needs to be exported. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 4月, 2011 5 次提交
-
-
由 Takashi Iwai 提交于
Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
-
由 Mark Brown 提交于
This is also in the old sysfs diagnostics but it's nice to have everything in one place. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Lines should be less than 80 columns. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
We don't need to log every I2C transfer, and certainly not at error level. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Seungwhan Youn 提交于
This patch fixes to avoid compile error when ASoC codec doesn't use I2C nor SPI on snd_soc_hw_bulk_write_raw(). Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 4月, 2011 7 次提交
-
-
由 Mark Brown 提交于
-
由 Stephen Warren 提交于
wordsize is used as the textual width of a register address. regsize is used as the textual width of a register value. The assignments to these values were swapped. In the case of WM8903, which has 8-bit register addresses and 16-bit register values, this caused the register values to be clipped to 2 digits instead of the full 4. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Marek Vasut 提交于
This patch firstly restructurizes the code a bit by getting rid of continuous checking for machine type in spitz_mic_bias(). Then the patch properly requests the MIC GPIO in the spitz_init() and frees it in spitz_exit(). Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
snd_soc_jack_gpio has a name field. Use that name when registering the IRQ, since this is far more informative than the codec driver name. This shows up in /proc/interrupts. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.39
-
由 Vasily Khoruzhick 提交于
pxa2xx_pcm_hw_free frees dma channel and sets prtd->dma_ch to -1, but does not set prtd->params to NULL, so if pxa2xx_pcm_hw_params will be called immediately, it leaves prtd->dma_ch initialized with -1, and it results in oops in __pxa2xx_pcm_prepare. This bug is triggered via SDL. This patch adds check for prtd->dma_ch to __pxa2xx_pcm_prepare and cleans prtd->params, so now it works properly. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 3月, 2011 10 次提交
-
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-