In order to be able to use the DBG_MDSCR_* macros from the KVM code,
move the relevant definitions to the obvious include file.

Also move the debug_el enum to a portion of the file that is guarded
by #ifndef __ASSEMBLY__ in order to use that file from assembly code.
Acked-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

pm_fake doesn't quite describe what the handler does (ignoring writes
and returning 0 for reads).

As we're about to use it (a lot) in a different context, rename it
with a (admitedly cryptic) name that make sense for all users.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Fix issue with 32bit guests running on top of BE KVM host.
Indexes of high and low words of 64bit cp15 register are
swapped in case of big endian code, since 64bit cp15 state is
restored or saved with double word write or read instruction.

Define helper macro to access low words of 64bit cp15 register.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Since size of all sys registers is always 8 bytes. Current
code is actually endian agnostic. Just clean it up a bit.
Removed comment about little endian. Change type of pointer
from 'void *' to 'u64 *' to enforce stronger type checking.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

esr_el2 field of struct kvm_vcpu_fault_info has u32 type.
It should be stored as word. Current code works in LE case
because existing puts least significant word of x1 into
esr_el2, and it puts most significant work of x1 into next
field, which accidentally is OK because it is updated again
by next instruction. But existing code breaks in BE case.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In case of guest CPU running in LE mode and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the last missing bits that enable GICv2 emulation on top of
GICv3 hardware.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce the GICv3 world switch code used to save/restore the
GICv3 context.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce the support code for emulating a GICv2 on top of GICv3
hardware.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

GICv3 requires the IMO and FMO bits to be tightly coupled with some
of the interrupt controller's register switch.

In order to have similar code paths, move the manipulation of these
bits to the GICv2 switch code.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the GICv2 world switch code into its own file, and add the
necessary indirection to the arm64 switch code.

Also introduce a new type field to the vgic_params structure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We already have __hyp_text_{start,end} to express the boundaries
of the HYP text section, and __kvm_hyp_code_{start,end} are getting
in the way of a more modular world switch code.

Just turn __kvm_hyp_code_{start,end} into #defines mapping the
linker-emited symbols.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Brutally hack the innocent vgic code, and move the GICv2 specific code
to its own file, using vgic_ops and vgic_params as a way to pass
information between the two blocks.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In order to make way for the GICv3 registers, move the v2-specific
registers to their own structure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

For correct guest suspend/resume behaviour we need to ensure we include
the generic timer registers for 64 bit guests. As CONFIG_KVM_ARM_TIMER is
always set for arm64 we don't need to worry about null implementations.
However I have re-jigged the kvm_arm_timer_set/get_reg declarations to
be in the common include/kvm/arm_arch_timer.h headers.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

I suspect this is a -ECUTPASTE fault from the initial implementation. If
we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG
implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues.

The kvm/api.txt document describes all arm64 registers as starting with
0x60xx... (i.e KVM_REG_ARM64).
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

unmap_range() was utterly broken, to quote Marc, and broke in all sorts
of situations.  It was also quite complicated to follow and didn't
follow the usual scheme of having a separate iterating function for each
level of page tables.

Address this by refactoring the code and introduce a pgd_clear()
function.
Reviewed-by: NJungseok Lee <jays.lee@samsung.com>
Reviewed-by: NMario Smarduch <m.smarduch@samsung.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The Generic Interrupt Controller (version 3) offers services that are
similar to GICv2, with a number of additional features:
- Affinity routing based on the CPU MPIDR (ARE)
- System register for the CPU interfaces (SRE)
- Support for more that 8 CPUs
- Locality-specific Peripheral Interrupts (LPIs)
- Interrupt Translation Services (ITS)

This patch adds preliminary support for GICv3 with ARE and SRE,
non-secure mode only. It relies on higher exception levels to grant ARE
and SRE access.

Support for LPI and ITS will be added at a later time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: NZi Shen Lim <zlim@broadcom.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NTirumalesh Chalamarla <tchalamarla@cavium.com>
Reviewed-by: NYun Wu <wuyun.wu@huawei.com>
Reviewed-by: NZhen Lei <thunder.leizhen@huawei.com>
Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com>
Tested-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

This patch adds APM X-Gene SoC RTC DTS entry
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs.  So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.

Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On platforms implementing CPU power management, the CPUidle subsystem
can allow CPUs to enter idle states where local timers logic is lost on power
down. To keep the software timers functional the kernel relies on an
always-on broadcast timer to be present in the platform to relay the
interrupt signalling the timer expiries.

For platforms implementing CPU core gating that do not implement an always-on
HW timer or implement it in a broken way, this patch adds code to initialize
the kernel hrtimer based clock event device upon boot (which can be chosen as
tick broadcast device by the kernel).
It relies on a dynamically chosen CPU to be always powered-up. This CPU then
relays the timer interrupt to CPUs in deep-idle states through its HW local
timer device.

Having a CPU always-on has implications on power management platform
capabilities and makes CPUidle suboptimal, since at least a CPU is kept
always in a shallow idle state by the kernel to relay timer interrupts,
but at least leaves the kernel with a functional system with some working
power management capabilities.

The hrtimer based clock event device is unconditionally registered, but
has the lowest possible rating such that any broadcast-capable HW clock
event device present will be chosen in preference as the tick broadcast
device.
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 9c7e535f ("arm64: mm: Route pmd thp functions through pte
equivalents") changed the pmd manipulator and accessor functions to
convert the target pmd to a pte, process it with the pte functions, then
convert it back. Along the way, we gained support for PTE_WRITE, however
this is completely ignored by set_pmd_at, and so we fail to set the
PMD_SECT_RDONLY for PMDs, resulting in all sorts of lovely failures (like
CoW not working).

Partially reverting the offending commit (by making use of
PMD_SECT_RDONLY explicitly for pmd_{write,wrprotect,mkwrite} functions)
leads to further issues because pmd_write can then return potentially
incorrect values for page table entries marked as RDONLY, leading to
BUG_ON(pmd_write(entry)) tripping under some THP workloads.

This patch fixes the issue by routing set_pmd_at through set_pte_at,
which correctly takes the PTE_WRITE flag into account. Given that
THP mappings are always anonymous, the additional cache-flushing code
in __sync_icache_dcache won't impose any significant overhead as the
flush will be skipped.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: NSteve Capper <steve.capper@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch allows system call entry or exit to be traced as ftrace events,
ie. sys_enter_*/sys_exit_*, if CONFIG_FTRACE_SYSCALLS is enabled.
Those events appear and can be controlled under
    ${sysfs}/tracing/events/syscalls/

Please note that we can't trace compat system calls here because
AArch32 mode does not share the same syscall table with AArch64.
Just define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS in order to avoid unexpected
results (bogus syscalls reported or even hang-up).
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

CALLER_ADDRx returns caller's address at specified level in call stacks.
They are used for several tracers like irqsoff and preemptoff.
Strange to say, however, they are refered even without FTRACE.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch allows "dynamic ftrace" if CONFIG_DYNAMIC_FTRACE is enabled.
Here we can turn on and off tracing dynamically per-function base.

On arm64, this is done by patching single branch instruction to _mcount()
inserted by gcc -pg option. The branch is replaced to NOP initially at
kernel start up, and later on, NOP to branch to ftrace_caller() when
enabled or branch to NOP when disabled.
Please note that ftrace_caller() is a counterpart of _mcount() in case of
'static' ftrace.

More details on architecture specific requirements are described in
Documentation/trace/ftrace-design.txt.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch implements arm64 specific part to support function tracers,
such as function (CONFIG_FUNCTION_TRACER), function_graph
(CONFIG_FUNCTION_GRAPH_TRACER) and function profiler
(CONFIG_FUNCTION_PROFILER).

With 'function' tracer, all the functions in the kernel are traced with
timestamps in ${sysfs}/tracing/trace. If function_graph tracer is
specified, call graph is generated.

The kernel must be compiled with -pg option so that _mcount() is inserted
at the beginning of functions. This function is called on every function's
entry as long as tracing is enabled.
In addition, function_graph tracer also needs to be able to probe function's
exit. ftrace_graph_caller() & return_to_handler do this by faking link
register's value to intercept function's return path.

More details on architecture specific requirements are described in
Documentation/trace/ftrace-design.txt.
Reviewed-by: NGanapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Recordmcount utility under scripts is run, after compiling each object,
to find out all the locations of calling _mcount() and put them into
specific seciton named __mcount_loc.
Then linker collects all such information into a table in the kernel image
(between __start_mcount_loc and __stop_mcount_loc) for later use by ftrace.

This patch adds arm64 specific definitions to identify such locations.
There are two types of implementation, C and Perl. On arm64, only C version
is used to build the kernel now that CONFIG_HAVE_C_RECORDMCOUNT is on.
But Perl version is also maintained.

This patch also contains a workaround just in case where a header file,
elf.h, on host machine doesn't have definitions of EM_AARCH64 nor
R_AARCH64_ABS64. Without them, compiling C version of recordmcount will
fail.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

walk_stackframe() calls unwind_frame(), and if walk_stackframe() is
"notrace", unwind_frame() should be also "notrace".
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Since insn.h is indirectly included in asm/entry-ftrace.S,
we need to exclude some declarations by __ASSEMBLY__.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In order to allow KVM to run on Cortex-A53 implementations, wire the
minimal support required.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Change the arm64 linker script ENTRY() command to define _text as the
kernel entry point.

The arm64 boot protocol specifies that the kernel must be entered at the
beginning of the kernel image.  The existing ENTRY() command defined the
symbol stext as the entry point, which emitted an incorrect entry point,
but would not cause a runtime error because the existing entry code
immediately jumps to stext.
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Booting a kernel with CONFIG_EFI enabled on a non-EFI system caused
an oops with the current UEFI support code.
Add the required test to prevent this.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strlen() and strnlen() functions.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strcmp() and strncmp() functions.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized memcmp() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memset() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memmove() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memcpy() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Whilst our defconfig is certainly usable, there are a few extra features
we can enable to make it considerably more useful, particularly if
people are using it for testing:

 - KVM
 - SWAP
 - Hugepages
 - ARMv8 crypto

This patch enables these options in our defconfig. Note that the ordering
has changed slightly, since this is the result of a new savedefconfig
make target.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The only idle method for arm64 is WFI and it therefore
unconditionally requires the reschedule interrupt when idle.
Suggested-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/20140509170649.GG13658@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>