The function dma_addrwidth() always returns the same value so
it is redundant. As such it has been removed.
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function wl_alloc_dma_resources() does not provide any value
for the brcmsmac driver as it only returns true. It has been
removed from the driver.
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Linux coding style strongly suggest to limit length of source lines
to 80 characters. This commit correct this for the brcmsmac sources.
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The file pub.h contained a number of definitions that are not
used in the brcmsmac driver and consequently have been removed.
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The macro PCI_DEVICE() fills in the entry in abbreviated manner. Using
this removes the "lines over 80 characters" checkpatch warning on these
entries.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

All of them being 'line longer than 80 chars' type of warning.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most of them being 'line longer than 80 chars' type of warning.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most of them being 'line longer than 80 chars' type of warning.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usage of simple_strtoul is not preferred. Instead kstrtoul
should be used. This patch fixes this for the brcmfmac driver.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To increase code readability of brcmfmac
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Increase readability of brcmfmac
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use unified debug macros BRCMF_* in fullmac.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use unified debug macros in fullmac
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most members in sdio_hc are no longer needed anymore. And fullmac
is keeping a global pointer of this structure. This patch deletes
the structure and places the useful member to a new structure
brcmf_sdio_dev. The pointer of brcmf_sdio_dev will be save in the
private driver data during sdio_probe. Therefore, we don't need to
keep the global pointer.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use BRCMF_* instead of sd_* as debug message interface
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently fullmac only support bcm4329. Remove dead code for
unsupported chip.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove global wait queue head sdioh_spinwait_sleep in fullmac.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

brcmf_mmc_suspend is used for sdio suspend/resume function. Hence it
should be placed in sdio interface layer.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use kernel timer macros to replace current private timeout functions
used in dhd_sdio.c
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usage of simple_strtoul is not preferred. Instead kstrtoul
should be used. This patch fixes this for the brcmsmac driver.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. bus->card is assigned in brcmf_sdbrcm_probe (before
brcmf_sdbrcm_probe_attach()). Since w_sdreg32() and r_sdreg32() are called
only after that assignment, they can safely use bus->card. Thus there
is no instance left where brcmf_sdcard_reg_read() or brcmf_sdcard_reg_write()
is called with a NULL parameter, so the mechanism in bcmsdh.c that deals with
a NULL pointer could be deleted.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Macro invocations have been substituted with macro expansion.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This instruction was required for the bcm4716/bcm4322, but since the
fullmac driver only supports bcm4329, it could be removed. After that,
the R_REG macro's were identical and thus were reduced to just 1 R_REG
macro.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver now builds for big endian mips platform, possibly also for other
big endian platforms. A change was made to the R_REG and W_REG macro's.
These macro's perform an xor (^) operation for endianess swap purposes.
Gcc complained because an xor operation is not allowed on a pointer type.
Fixed this by casting the pointer to an unsigned long.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code that exceeded the 80 char limit has been placed in separate
functions. Checkpatch warnings for the phy dir are now reduced to 1.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Refactored code to not exceed the 80 char limit.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most of them being 'line exceeds 80 chars'. Still checkpatch warnings
for the phy dir left, these will be resolved in the subsequent commits.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Two members vcons_in and vcons_out were declared using the volatile
keyword. However, there is no reason for doing so. The member is
used only to calculate the backplane address to access using offsetof.
This address is passed to subsequent read function. Use of volatile
is not warranted.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The sysioc thread was triggered using a semaphore. Now it waits for
a wake_up() on its wait queue and the semaphore has been removed as
the semaphore serves another purpose. This removes a checkpatch
warning for dhd_linux.c.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Ioctl response wait is used only by bus layer in fullmac. Move the
corresponding code to dhd_sdio.c
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In fullmac some variables are used by sdio layer declared in
dhd_linux.c. Move them to dhd_sdio.c for clean up.
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With this patch, brcmfmac driver will pass roamed channel information to
cfg80211 via cfg80211_roamed() API.
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Disabling the interface doesn't terminate undergoing
iscan in FW. When the interface is enabled immediately,
first scan request is returning the stale scan results,
which are populated during the earlier iscan. These stale
scan results are causing random failures with chromium
auto test cases.

With this patch, iscan will be terminated in FW whenever
iscan thread is terminated by the host driver.
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed unnecessary braces in single-statement blocks. Used the tools
'uncrustify' and 'coccinelle' to accomplish this.
Signed-off-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function brcmu_ether_atoe() does exactly the same as mac_pton().
The driver now uses the latter and brcmu_ether_atoe() has been removed
as it is not used anymore.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Connect request made robust by passing broadcast bssid to the
FW in SET_SSID request. This fix helps STA to connect
to any available AP in ESS instead of sticking to one
unresponsive AP.
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With this patch, FW roaming will be enabled by default in
brcmfmac driver
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

brcmfmac driver is getting request for enabling power save
before the interface is up. With the earlier implementation,
this request used to fail resulting out of sync power save
state between cfg80211 & brcmfmac driver. With this fix,
power save state is stored in configuration parameters and
will be used while initializing the adapter.
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function brcmf_c_pattern_atoh() returned meaningless -1 value.
These have been replaced by linux error code -EINVAL.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>