staging: brcm80211: move sdio related variables to dhd_sdio.c

In fullmac some variables are used by sdio layer declared in
dhd_linux.c. Move them to dhd_sdio.c for clean up.
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/dhd.h

@@ -669,12 +669,6 @@ extern atomic_t brcmf_mmc_suspend;
  * Insmod parameters for debug/test
  */
 
-/* Use interrupts */
-extern uint brcmf_intr;
-
-/* Use polling */
-extern uint brcmf_poll;
-
 /* ARP offload agent mode */
 extern uint brcmf_arp_mode;
 
@@ -696,13 +690,6 @@ extern uint brcmf_roam;
 /* Roaming mode control */
 extern uint brcmf_radio_up;
 
-/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
-extern int brcmf_idletime;
-#define BRCMF_IDLETIME_TICKS 1
-
-/* SDIO Drive Strength */
-extern uint brcmf_sdiod_drive_strength;
-
 /* Override to force tx queueing all the time */
 extern uint brcmf_force_tx_queueing;
 

drivers/staging/brcm80211/brcmfmac/dhd_linux.c

@@ -115,8 +115,6 @@ module_param(brcmf_pkt_filter_init, uint, 0);
 uint brcmf_master_mode = true;
 module_param(brcmf_master_mode, uint, 0);
 
-module_param(brcmf_dongle_memsize, int, 0);
-
 /* Contorl fw roaming */
 uint brcmf_roam = 1;
 
@@ -132,26 +130,6 @@ module_param_string(iface_name, iface_name, IFNAMSIZ, 0);
 /* IOCTL response timeout */
 int brcmf_ioctl_timeout_msec = IOCTL_RESP_TIMEOUT;
 
-/* Idle timeout for backplane clock */
-int brcmf_idletime = BRCMF_IDLETIME_TICKS;
-module_param(brcmf_idletime, int, 0);
-
-/* Use polling */
-uint brcmf_poll;
-module_param(brcmf_poll, uint, 0);
-
-/* Use interrupts */
-uint brcmf_intr = true;
-module_param(brcmf_intr, uint, 0);
-
-/* SDIO Drive Strength (in milliamps) */
-uint brcmf_sdiod_drive_strength = 6;
-module_param(brcmf_sdiod_drive_strength, uint, 0);
-
-/* Tx/Rx bounds */
-module_param(brcmf_txbound, uint, 0);
-module_param(brcmf_rxbound, uint, 0);
-
 #ifdef SDTEST
 /* Echo packet generator (pkts/s) */
 uint brcmf_pktgen;

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -838,11 +838,29 @@ module_param(brcmf_console_ms, uint, 0);
 /* Tx/Rx bounds */
 uint brcmf_txbound;
 uint brcmf_rxbound;
+module_param(brcmf_txbound, uint, 0);
+module_param(brcmf_rxbound, uint, 0);
 uint brcmf_txminmax;
 
+int brcmf_idletime = 1;
+module_param(brcmf_idletime, int, 0);
+
+/* SDIO Drive Strength (in milliamps) */
+uint brcmf_sdiod_drive_strength = 6;
+module_param(brcmf_sdiod_drive_strength, uint, 0);
+
+/* Use polling */
+uint brcmf_poll;
+module_param(brcmf_poll, uint, 0);
+
+/* Use interrupts */
+uint brcmf_intr = true;
+module_param(brcmf_intr, uint, 0);
+
 /* override the RAM size if possible */
 #define DONGLE_MIN_MEMSIZE (128 * 1024)
 int brcmf_dongle_memsize;
+module_param(brcmf_dongle_memsize, int, 0);
 
 static bool brcmf_alignctl;