Key more of the domain validation settings off the inquiry data from
the disk (in particular, don't try IU or DT unless the disk claims to
support them.

Also add a new dv_in_progress flag to prevent recursive DV.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

 #elif CONFIG_44x
in ibm4xx.h should've been
 #elif defined(CONFIG_44x)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove IPGA volume controls and merge the IPGA range to ADC volume
controls.  These two volumes are not really independent but connected
simply in different ranges 0-0x7f and 0x80-max.  It doesn't make sense
to provide two controls.
Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range
to skip 0x80 (increment one) for such controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds a new attribute, pcm_class, to each PCM sysfs entry.
It's useful to detect what kind of PCM stream is, for example, HAL
can check whether it's a modem or not.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the definition of TLV dB range compound.  It contains one or
more dB-range or linear-volume TLV entries with min/max ranges.
Used for volume controls with non-linear curves.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- Clean up the code in AK4xxx-ADDA i2c code.
- Fix capture gain controls for AK5365
- Changed the static table for DAC/ADC mixer labels to use
  structs
- Implemented TLV entries for each AK codec
  The volumes in AK4524, AK4528 and AK5365 are corrected with
  a table to be suitable for dB conversion.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the definition of linear volume TLV type.
Some DSP chips and codecs (e.g. AK codec) use linear volume control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the dB scale information to vxpocket and vx222 drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the dB scale information to ad1848 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Add support for the AK5365 ADC.
Signed-off-by: NJochen Voss <voss@seehuhn.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The flag to avoid 32bit-incompatible mmap for control/status records
should be outside the pcm substream instance since a substream can be
shared among multiple opens.  Now it's flagged in pcm_file list that
is directly assigned to file->private_data.
Also, removed snd_pcm_add_file() and remove_file() functions and
substream.files field that are not really used in the code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Remove unused tlv_rw field from struct snd_kcontrol.  The callback is
set in tlv.c field, instead.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- added callback option
- added READ/WRITE/COMMAND flags to access member
- added WRITE/COMMAND ioctls
- added SNDRV_CTL_EVENT_MASK_TLV for TLV change notifications
- added TLV support to ELEM_ADD ioctl
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added CONFIG_SND_AC97_POWER_SAVE kernel config to enable the support
of aggressive AC97 power-saving mode.  In this mode, the AC97
powerdown register bits are dynamically controlled at each open/close
of PCM streams.
The mode is activated via power_save option for snd-ac97-codec
driver.  As default it's off.  It can be turned on/off on the fly
via sysfs, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Deprecated snd_card_free_in_thread(), replaced with
snd_card_free_when_closed().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Orignally proposed by Sam Revitch <sam.revitch@gmail.com>.
Unregister device files at disconnection to avoid the futher accesses.
Also, the dev_unregister callback is removed and replaced with the
combination of disconnect + free.
A new function snd_card_free_when_closed() is introduced, which is
used in USB disconnect callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- Add the linked list to each proc entry to enable a single-shot
  disconnection (unregister)
- Deprecate snd_info_unregister(), use snd_info_free_entry()
- Removed NULL checks of snd_info_free_entry()
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch implements a TLV mechanism to transfer an additional information
like dB scale to the user space. The types might be extended in future.
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

In a subsequent patch, this will allow the portmapper to take a reference
to the rpc_xprt for which it is updating the port number, fixing an Oops.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we have a copy of the symlink path in the page cache, we can pass
a struct page down to the XDR routines instead of a string buffer.

Test plan:
Connectathon, all NFS versions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the LOOKUP or GETATTR in nfs_instantiate fail, nfs_instantiate will do a
d_drop before returning.  But some callers already do a d_drop in the case
of an error return.  Make certain we do only one d_drop in all error paths.

This issue was introduced because over time, the symlink proc API diverged
slightly from the create/mkdir/mknod proc API.  To prevent other coding
mistakes of this type, change the symlink proc API to be more like
create/mkdir/mknod and move the nfs_instantiate call into the symlink proc
routines so it is used in exactly the same way for create, mkdir, mknod,
and symlink.

Test plan:
Connectathon, all versions of NFS.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The two function call API for creating a new RPC client is now obsolete.
Remove it.

Also, remove an unnecessary check to see whether the caller is capable of
using privileged network services.  The kernel RPC client always uses a
privileged ephemeral port by default; callers are responsible for checking
the authority of users to make use of any RPC service, or for specifying
that a nonprivileged port is acceptable.

Test plan:
Repeated runs of Connectathon locking suite.  Check network trace to ensure
correctness of NLM requests and replies.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for more generic transport endpoint handling needed by transports
that might use different forms of addressing, such as IPv6.

Introduce a single function call to replace the two-call
xprt_create_proto/rpc_create_client API.  Define a new rpc_create_args
structure that allows callers to pass in remote endpoint addresses of
varying length.

Test-plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove some unused macros related to accessing an RPC peer address

Test plan:
Compile kernel with CONFIG_NFS option enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

IPv6 addresses are big (128 bytes).  Now that no RPC client consumers treat
the addr field in rpc_xprt structs as an opaque, and access it only via the
API calls, we can safely widen the field in the rpc_xprt struct to
accomodate larger addresses.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Provide an API for formatting the remote peer address for printing without
exposing its internal structure.  The address could be dynamic, so we
support a function call to get the address rather than reading it straight
out of a structure.

Test-plan:
Destructive testing (unplugging the network temporarily).  Probably need
to rig a server where certain services aren't running, or that returns an
error for some typical operation.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a new method to the transport switch API to provide a way to convert
the opaque contents of xprt->addr to a human-readable string.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

include/linux/sunrpc/clnt.h already includes include/linux/sunrpc/xprt.h.
We can remove xprt.h from source files that already include clnt.h.
Likewise include/linux/sunrpc/timer.h.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Provide an API for retrieving the remote peer address without allowing
direct access to the rpc_xprt struct.

Test-plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Introduce a clean transport switch API for plugging in different types of
rpcbind mechanisms.  For instance, rpcbind can cleanly replace the
existing portmapper client, or a transport can choose to implement RPC
binding any way it likes.

Test plan:
Destructive testing (unplugging the network temporarily).  Connectathon
with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The previous patches removed the last user of RPC child tasks, so we can
remove support for child tasks from net/sunrpc/sched.c now.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move connection and bind state that was maintained in the rpc_clnt
structure to the rpc_xprt structure.  This will allow the creation of
a clean API for plugging in different types of bind mechanisms.

This brings improvements such as the elimination of a single spin lock to
control serialization for all in-kernel RPC binding.  A set of per-xprt
bitops is used to serialize tasks during RPC binding, just like it now
works for making RPC transport connections.

Test-plan:
Destructive testing (unplugging the network temporarily).  Connectathon
with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Hide the contents and format of xprt->addr by eliminating direct uses
of the xprt->addr.sin_port field.  This change is required to support
alternate RPC host address formats (eg IPv6).

Test-plan:
Destructive testing (unplugging the network temporarily).  Repeated runs of
Connectathon locking suite with UDP and TCP.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.

It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.

We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.

Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:

 (1) The root and intervening nodes may not be accessible to the client.

     With NFS2 and NFS3, for instance, mountd is called on the server to get
     the filehandle for the tip of a path. mountd won't give us handles for
     anything we don't have permission to access, and so we can't set up NFS
     inodes for such nodes, and so can't easily set up dentries (we'd have to
     have ghost inodes or something).

     With this patch we don't actually create dentries until we get handles
     from the server that we can use to set up their inodes, and we don't
     actually bind them into the tree until we know for sure where they go.

 (2) Inaccessible symbolic links.

     If we're asked to mount two exports from the server, eg:

	mount warthog:/warthog/aaa/xxx /mmm
	mount warthog:/warthog/bbb/yyy /nnn

     We may not be able to access anything nearer the root than xxx and yyy,
     but we may find out later that /mmm/www/yyy, say, is actually the same
     directory as the one mounted on /nnn. What we might then find out, for
     example, is that /warthog/bbb was actually a symbolic link to
     /warthog/aaa/xxx/www, but we can't actually determine that by talking to
     the server until /warthog is made available by NFS.

     This would lead to having constructed an errneous dentry tree which we
     can't easily fix. We can end up with a dentry marked as a directory when
     it should actually be a symlink, or we could end up with an apparently
     hardlinked directory.

     With this patch we need not make assumptions about the type of a dentry
     for which we can't retrieve information, nor need we assume we know its
     place in the grand scheme of things until we actually see that place.

This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).

This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.

Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.

This patch makes the following changes:

 (1) The server record construction/destruction has been abstracted out into
     its own set of functions to make things easier to get right.  These have
     been moved into fs/nfs/client.c.

     All the code in fs/nfs/client.c has to do with the management of
     connections to servers, and doesn't touch superblocks in any way; the
     remaining code in fs/nfs/super.c has to do with VFS superblock management.

 (2) The sequence of events undertaken by NFS mount is now reordered:

     (a) A volume representation (struct nfs_server) is allocated.

     (b) A server representation (struct nfs_client) is acquired.  This may be
     	 allocated or shared, and is keyed on server address, port and NFS
     	 version.

     (c) If allocated, the client representation is initialised.  The state
     	 member variable of nfs_client is used to prevent a race during
     	 initialisation from two mounts.

     (d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
     	 the root filehandle for the mount (fs/nfs/getroot.c).  For NFS2/3 we
     	 are given the root FH in advance.

     (e) The volume FSID is probed for on the root FH.

     (f) The volume representation is initialised from the FSINFO record
     	 retrieved on the root FH.

     (g) sget() is called to acquire a superblock.  This may be allocated or
     	 shared, keyed on client pointer and FSID.

     (h) If allocated, the superblock is initialised.

     (i) If the superblock is shared, then the new nfs_server record is
     	 discarded.

     (j) The root dentry for this mount is looked up from the root FH.

     (k) The root dentry for this mount is assigned to the vfsmount.

 (3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
     returns; this function now attaches disconnected trees from alternate
     roots that happen to be discovered attached to a directory being read (in
     the same way nfs_lookup() is made to do for lookup ops).

     The new d_materialise_unique() function is now used to do this, thus
     permitting the whole thing to be done under one set of locks, and thus
     avoiding any race between mount and lookup operations on the same
     directory.

 (4) The client management code uses a new debug facility: NFSDBG_CLIENT which
     is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.

 (5) Clone mounts are now called xdev mounts.

 (6) Use the dentry passed to the statfs() op as the handle for retrieving fs
     statistics rather than the root dentry of the superblock (which is now a
     dummy).
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Eliminate nfs_server::client_sys in favour of nfs_client::cl_rpcclient as we
only really need one per server that we're talking to since it doesn't have any
security on it.

The retransmission management variables are also moved to the common struct as
they're required to set up the cl_rpcclient connection.

The NFS2/3 client and client_acl connections are thenceforth derived by cloning
the cl_rpcclient connection and post-applying the authorisation flavour.

The code for setting up the initial common connection has been moved to
client.c as nfs_create_rpc_client().  All the NFS program definition tables are
also moved there as that's where they're now required rather than super.c.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>