提交 6dbe6628 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] Add experimental support of aggressive AC97 power-saving mode

Added CONFIG_SND_AC97_POWER_SAVE kernel config to enable the support
of aggressive AC97 power-saving mode.  In this mode, the AC97
powerdown register bits are dynamically controlled at each open/close
of PCM streams.
The mode is activated via power_save option for snd-ac97-codec
driver.  As default it's off.  It can be turned on/off on the fly
via sysfs, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 2b29b13c
......@@ -27,6 +27,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#include "pcm.h"
#include "control.h"
#include "info.h"
......@@ -140,6 +141,20 @@
#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
/* powerdown bits */
#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
/* extended audio ID bit defines */
#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
#define AC97_EI_DRA 0x0002 /* Double rate supported */
......@@ -359,6 +374,7 @@
#define AC97_SCAP_INV_EAPD (1<<7) /* inverted EAPD */
#define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
#define AC97_SCAP_NO_SPDIF (1<<9) /* don't build SPDIF controls */
#define AC97_SCAP_EAPD_LED (1<<10) /* EAPD as mute LED */
/* ac97->flags */
#define AC97_HAS_PC_BEEP (1<<0) /* force PC Speaker usage */
......@@ -491,6 +507,12 @@ struct snd_ac97 {
/* jack-sharing info */
unsigned char indep_surround;
unsigned char channel_mode;
#ifdef CONFIG_SND_AC97_POWER_SAVE
unsigned int power_up; /* power states */
struct workqueue_struct *power_workq;
struct work_struct power_work;
#endif
struct device dev;
};
......@@ -532,6 +554,15 @@ unsigned short snd_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
void snd_ac97_write_cache(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value);
#ifdef CONFIG_SND_AC97_POWER_SAVE
int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup);
#else
static inline int snd_ac97_update_power(struct snd_ac97 *ac97, int reg,
int powerup)
{
return 0;
}
#endif
#ifdef CONFIG_PM
void snd_ac97_suspend(struct snd_ac97 *ac97);
void snd_ac97_resume(struct snd_ac97 *ac97);
......@@ -583,6 +614,7 @@ struct ac97_pcm {
copy_flag: 1, /* lowlevel driver must fill all entries */
spdif: 1; /* spdif pcm */
unsigned short aslots; /* active slots */
unsigned short cur_dbl; /* current double-rate state */
unsigned int rates; /* available rates */
struct {
unsigned short slots; /* driver input: requested AC97 slot numbers */
......
......@@ -100,4 +100,17 @@ config SND_MPU401
To compile this driver as a module, choose M here: the module
will be called snd-mpu401.
config SND_AC97_POWER_SAVE
bool "AC97 Power-Saving Mode"
depends on SND_AC97_CODEC && EXPERIMENTAL
default n
help
Say Y here to enable the aggressive power-saving support of
AC97 codecs. In this mode, the power-mode is dynamically
controlled at each open/close.
The mode is activated by passing power_save=1 option to
snd-ac97-codec driver. You can toggle it dynamically over
sysfs, too.
endmenu
......@@ -47,6 +47,11 @@ static int enable_loopback;
module_param(enable_loopback, bool, 0444);
MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
#ifdef CONFIG_SND_AC97_POWER_SAVE
static int power_save;
module_param(power_save, bool, 0644);
MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
#endif
/*
*/
......@@ -187,6 +192,8 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
};
static void update_power_regs(struct snd_ac97 *ac97);
/*
* I/O routines
*/
......@@ -554,6 +561,18 @@ int snd_ac97_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value
}
err = snd_ac97_update_bits(ac97, reg, val_mask, val);
snd_ac97_page_restore(ac97, page_save);
#ifdef CONFIG_SND_AC97_POWER_SAVE
/* check analog mixer power-down */
if ((val_mask & 0x8000) &&
(kcontrol->private_value & (1<<30))) {
if (val & 0x8000)
ac97->power_up &= ~(1 << (reg>>1));
else
ac97->power_up |= 1 << (reg>>1);
if (power_save)
update_power_regs(ac97);
}
#endif
return err;
}
......@@ -962,6 +981,10 @@ static int snd_ac97_bus_dev_free(struct snd_device *device)
static int snd_ac97_free(struct snd_ac97 *ac97)
{
if (ac97) {
#ifdef CONFIG_SND_AC97_POWER_SAVE
if (ac97->power_workq)
destroy_workqueue(ac97->power_workq);
#endif
snd_ac97_proc_done(ac97);
if (ac97->bus)
ac97->bus->codec[ac97->num] = NULL;
......@@ -1117,7 +1140,9 @@ struct snd_kcontrol *snd_ac97_cnew(const struct snd_kcontrol_new *_template, str
/*
* create mute switch(es) for normal stereo controls
*/
static int snd_ac97_cmute_new_stereo(struct snd_card *card, char *name, int reg, int check_stereo, struct snd_ac97 *ac97)
static int snd_ac97_cmute_new_stereo(struct snd_card *card, char *name, int reg,
int check_stereo, int check_amix,
struct snd_ac97 *ac97)
{
struct snd_kcontrol *kctl;
int err;
......@@ -1137,10 +1162,14 @@ static int snd_ac97_cmute_new_stereo(struct snd_card *card, char *name, int reg,
}
if (mute_mask == 0x8080) {
struct snd_kcontrol_new tmp = AC97_DOUBLE(name, reg, 15, 7, 1, 1);
if (check_amix)
tmp.private_value |= (1 << 30);
tmp.index = ac97->num;
kctl = snd_ctl_new1(&tmp, ac97);
} else {
struct snd_kcontrol_new tmp = AC97_SINGLE(name, reg, 15, 1, 1);
if (check_amix)
tmp.private_value |= (1 << 30);
tmp.index = ac97->num;
kctl = snd_ctl_new1(&tmp, ac97);
}
......@@ -1186,7 +1215,9 @@ static int snd_ac97_cvol_new(struct snd_card *card, char *name, int reg, unsigne
/*
* create a mute-switch and a volume for normal stereo/mono controls
*/
static int snd_ac97_cmix_new_stereo(struct snd_card *card, const char *pfx, int reg, int check_stereo, struct snd_ac97 *ac97)
static int snd_ac97_cmix_new_stereo(struct snd_card *card, const char *pfx,
int reg, int check_stereo, int check_amix,
struct snd_ac97 *ac97)
{
int err;
char name[44];
......@@ -1197,7 +1228,9 @@ static int snd_ac97_cmix_new_stereo(struct snd_card *card, const char *pfx, int
if (snd_ac97_try_bit(ac97, reg, 15)) {
sprintf(name, "%s Switch", pfx);
if ((err = snd_ac97_cmute_new_stereo(card, name, reg, check_stereo, ac97)) < 0)
if ((err = snd_ac97_cmute_new_stereo(card, name, reg,
check_stereo, check_amix,
ac97)) < 0)
return err;
}
check_volume_resolution(ac97, reg, &lo_max, &hi_max);
......@@ -1209,8 +1242,10 @@ static int snd_ac97_cmix_new_stereo(struct snd_card *card, const char *pfx, int
return 0;
}
#define snd_ac97_cmix_new(card, pfx, reg, ac97) snd_ac97_cmix_new_stereo(card, pfx, reg, 0, ac97)
#define snd_ac97_cmute_new(card, name, reg, ac97) snd_ac97_cmute_new_stereo(card, name, reg, 0, ac97)
#define snd_ac97_cmix_new(card, pfx, reg, acheck, ac97) \
snd_ac97_cmix_new_stereo(card, pfx, reg, 0, acheck, ac97)
#define snd_ac97_cmute_new(card, name, reg, acheck, ac97) \
snd_ac97_cmute_new_stereo(card, name, reg, 0, acheck, ac97)
static unsigned int snd_ac97_determine_spdif_rates(struct snd_ac97 *ac97);
......@@ -1226,9 +1261,11 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* AD claims to remove this control from AD1887, although spec v2.2 does not allow this */
if (snd_ac97_try_volume_mix(ac97, AC97_MASTER)) {
if (ac97->flags & AC97_HAS_NO_MASTER_VOL)
err = snd_ac97_cmute_new(card, "Master Playback Switch", AC97_MASTER, ac97);
err = snd_ac97_cmute_new(card, "Master Playback Switch",
AC97_MASTER, 0, ac97);
else
err = snd_ac97_cmix_new(card, "Master Playback", AC97_MASTER, ac97);
err = snd_ac97_cmix_new(card, "Master Playback",
AC97_MASTER, 0, ac97);
if (err < 0)
return err;
}
......@@ -1265,19 +1302,23 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
if ((snd_ac97_try_volume_mix(ac97, AC97_SURROUND_MASTER))
&& !(ac97->flags & AC97_AD_MULTI)) {
/* Surround Master (0x38) is with stereo mutes */
if ((err = snd_ac97_cmix_new_stereo(card, "Surround Playback", AC97_SURROUND_MASTER, 1, ac97)) < 0)
if ((err = snd_ac97_cmix_new_stereo(card, "Surround Playback",
AC97_SURROUND_MASTER, 1, 0,
ac97)) < 0)
return err;
}
/* build headphone controls */
if (snd_ac97_try_volume_mix(ac97, AC97_HEADPHONE)) {
if ((err = snd_ac97_cmix_new(card, "Headphone Playback", AC97_HEADPHONE, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Headphone Playback",
AC97_HEADPHONE, 0, ac97)) < 0)
return err;
}
/* build master mono controls */
if (snd_ac97_try_volume_mix(ac97, AC97_MASTER_MONO)) {
if ((err = snd_ac97_cmix_new(card, "Master Mono Playback", AC97_MASTER_MONO, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Master Mono Playback",
AC97_MASTER_MONO, 0, ac97)) < 0)
return err;
}
......@@ -1310,7 +1351,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* build Phone controls */
if (!(ac97->flags & AC97_HAS_NO_PHONE)) {
if (snd_ac97_try_volume_mix(ac97, AC97_PHONE)) {
if ((err = snd_ac97_cmix_new(card, "Phone Playback", AC97_PHONE, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Phone Playback",
AC97_PHONE, 1, ac97)) < 0)
return err;
}
}
......@@ -1318,7 +1360,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* build MIC controls */
if (!(ac97->flags & AC97_HAS_NO_MIC)) {
if (snd_ac97_try_volume_mix(ac97, AC97_MIC)) {
if ((err = snd_ac97_cmix_new(card, "Mic Playback", AC97_MIC, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Mic Playback",
AC97_MIC, 1, ac97)) < 0)
return err;
if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_mic_boost, ac97))) < 0)
return err;
......@@ -1327,14 +1370,16 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* build Line controls */
if (snd_ac97_try_volume_mix(ac97, AC97_LINE)) {
if ((err = snd_ac97_cmix_new(card, "Line Playback", AC97_LINE, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Line Playback",
AC97_LINE, 1, ac97)) < 0)
return err;
}
/* build CD controls */
if (!(ac97->flags & AC97_HAS_NO_CD)) {
if (snd_ac97_try_volume_mix(ac97, AC97_CD)) {
if ((err = snd_ac97_cmix_new(card, "CD Playback", AC97_CD, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "CD Playback",
AC97_CD, 1, ac97)) < 0)
return err;
}
}
......@@ -1342,7 +1387,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* build Video controls */
if (!(ac97->flags & AC97_HAS_NO_VIDEO)) {
if (snd_ac97_try_volume_mix(ac97, AC97_VIDEO)) {
if ((err = snd_ac97_cmix_new(card, "Video Playback", AC97_VIDEO, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Video Playback",
AC97_VIDEO, 1, ac97)) < 0)
return err;
}
}
......@@ -1350,7 +1396,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
/* build Aux controls */
if (!(ac97->flags & AC97_HAS_NO_AUX)) {
if (snd_ac97_try_volume_mix(ac97, AC97_AUX)) {
if ((err = snd_ac97_cmix_new(card, "Aux Playback", AC97_AUX, ac97)) < 0)
if ((err = snd_ac97_cmix_new(card, "Aux Playback",
AC97_AUX, 1, ac97)) < 0)
return err;
}
}
......@@ -1385,9 +1432,12 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
} else {
if (!(ac97->flags & AC97_HAS_NO_STD_PCM)) {
if (ac97->flags & AC97_HAS_NO_PCM_VOL)
err = snd_ac97_cmute_new(card, "PCM Playback Switch", AC97_PCM, ac97);
err = snd_ac97_cmute_new(card,
"PCM Playback Switch",
AC97_PCM, 0, ac97);
else
err = snd_ac97_cmix_new(card, "PCM Playback", AC97_PCM, ac97);
err = snd_ac97_cmix_new(card, "PCM Playback",
AC97_PCM, 0, ac97);
if (err < 0)
return err;
}
......@@ -1398,7 +1448,9 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_control_capture_src, ac97))) < 0)
return err;
if (snd_ac97_try_bit(ac97, AC97_REC_GAIN, 15)) {
if ((err = snd_ac97_cmute_new(card, "Capture Switch", AC97_REC_GAIN, ac97)) < 0)
err = snd_ac97_cmute_new(card, "Capture Switch",
AC97_REC_GAIN, 0, ac97);
if (err < 0)
return err;
}
if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_control_capture_vol, ac97))) < 0)
......@@ -1829,6 +1881,13 @@ static int snd_ac97_dev_disconnect(struct snd_device *device)
/* build_ops to do nothing */
static struct snd_ac97_build_ops null_build_ops;
#ifdef CONFIG_SND_AC97_POWER_SAVE
static void do_update_power(void *data)
{
update_power_regs(data);
}
#endif
/**
* snd_ac97_mixer - create an Codec97 component
* @bus: the AC97 bus which codec is attached to
......@@ -1883,6 +1942,10 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
bus->codec[ac97->num] = ac97;
mutex_init(&ac97->reg_mutex);
mutex_init(&ac97->page_mutex);
#ifdef CONFIG_SND_AC97_POWER_SAVE
ac97->power_workq = create_workqueue("ac97");
INIT_WORK(&ac97->power_work, do_update_power, ac97);
#endif
#ifdef CONFIG_PCI
if (ac97->pci) {
......@@ -2117,15 +2180,8 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
return -ENOMEM;
}
}
/* make sure the proper powerdown bits are cleared */
if (ac97->scaps && ac97_is_audio(ac97)) {
reg = snd_ac97_read(ac97, AC97_EXTENDED_STATUS);
if (ac97->scaps & AC97_SCAP_SURROUND_DAC)
reg &= ~AC97_EA_PRJ;
if (ac97->scaps & AC97_SCAP_CENTER_LFE_DAC)
reg &= ~(AC97_EA_PRI | AC97_EA_PRK);
snd_ac97_write_cache(ac97, AC97_EXTENDED_STATUS, reg);
}
if (ac97_is_audio(ac97))
update_power_regs(ac97);
snd_ac97_proc_init(ac97);
if ((err = snd_device_new(card, SNDRV_DEV_CODEC, ac97, &ops)) < 0) {
snd_ac97_free(ac97);
......@@ -2153,22 +2209,155 @@ static void snd_ac97_powerdown(struct snd_ac97 *ac97)
snd_ac97_write(ac97, AC97_HEADPHONE, 0x9f9f);
}
power = ac97->regs[AC97_POWERDOWN] | 0x8000; /* EAPD */
power |= 0x4000; /* Headphone amplifier powerdown */
power |= 0x0300; /* ADC & DAC powerdown */
/* surround, CLFE, mic powerdown */
power = ac97->regs[AC97_EXTENDED_STATUS];
if (ac97->scaps & AC97_SCAP_SURROUND_DAC)
power |= AC97_EA_PRJ;
if (ac97->scaps & AC97_SCAP_CENTER_LFE_DAC)
power |= AC97_EA_PRI | AC97_EA_PRK;
power |= AC97_EA_PRL;
snd_ac97_write(ac97, AC97_EXTENDED_STATUS, power);
/* powerdown external amplifier */
if (ac97->scaps & AC97_SCAP_INV_EAPD)
power = ac97->regs[AC97_POWERDOWN] & ~AC97_PD_EAPD;
else if (! (ac97->scaps & AC97_SCAP_EAPD_LED))
power = ac97->regs[AC97_POWERDOWN] | AC97_PD_EAPD;
power |= AC97_PD_PR6; /* Headphone amplifier powerdown */
power |= AC97_PD_PR0 | AC97_PD_PR1; /* ADC & DAC powerdown */
snd_ac97_write(ac97, AC97_POWERDOWN, power);
udelay(100);
power |= 0x0400; /* Analog Mixer powerdown (Vref on) */
snd_ac97_write(ac97, AC97_POWERDOWN, power);
udelay(100);
#if 0
/* FIXME: this causes click noises on some boards at resume */
power |= 0x3800; /* AC-link powerdown, internal Clk disable */
power |= AC97_PD_PR2 | AC97_PD_PR3; /* Analog Mixer powerdown */
snd_ac97_write(ac97, AC97_POWERDOWN, power);
#ifdef CONFIG_SND_AC97_POWER_SAVE
if (power_save) {
udelay(100);
/* AC-link powerdown, internal Clk disable */
/* FIXME: this may cause click noises on some boards */
power |= AC97_PD_PR4 | AC97_PD_PR5;
snd_ac97_write(ac97, AC97_POWERDOWN, power);
}
#endif
}
struct ac97_power_reg {
unsigned short reg;
unsigned short power_reg;
unsigned short mask;
};
enum { PWIDX_ADC, PWIDX_FRONT, PWIDX_CLFE, PWIDX_SURR, PWIDX_MIC, PWIDX_SIZE };
static struct ac97_power_reg power_regs[PWIDX_SIZE] = {
[PWIDX_ADC] = { AC97_PCM_LR_ADC_RATE, AC97_POWERDOWN, AC97_PD_PR0},
[PWIDX_FRONT] = { AC97_PCM_FRONT_DAC_RATE, AC97_POWERDOWN, AC97_PD_PR1},
[PWIDX_CLFE] = { AC97_PCM_LFE_DAC_RATE, AC97_EXTENDED_STATUS,
AC97_EA_PRI | AC97_EA_PRK},
[PWIDX_SURR] = { AC97_PCM_SURR_DAC_RATE, AC97_EXTENDED_STATUS,
AC97_EA_PRJ},
[PWIDX_MIC] = { AC97_PCM_MIC_ADC_RATE, AC97_EXTENDED_STATUS,
AC97_EA_PRL},
};
#ifdef CONFIG_SND_AC97_POWER_SAVE
/**
* snd_ac97_update_power - update the powerdown register
* @ac97: the codec instance
* @reg: the rate register, e.g. AC97_PCM_FRONT_DAC_RATE
* @powerup: non-zero when power up the part
*
* Update the AC97 powerdown register bits of the given part.
*/
int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup)
{
int i;
if (! ac97)
return 0;
if (reg) {
/* SPDIF requires DAC power, too */
if (reg == AC97_SPDIF)
reg = AC97_PCM_FRONT_DAC_RATE;
for (i = 0; i < PWIDX_SIZE; i++) {
if (power_regs[i].reg == reg) {
if (powerup)
ac97->power_up |= (1 << i);
else
ac97->power_up &= ~(1 << i);
break;
}
}
}
if (! power_save)
return 0;
if (! powerup && ac97->power_workq)
/* adjust power-down bits after two seconds delay
* (for avoiding loud click noises for many (OSS) apps
* that open/close frequently)
*/
queue_delayed_work(ac97->power_workq, &ac97->power_work, HZ*2);
else
update_power_regs(ac97);
return 0;
}
EXPORT_SYMBOL(snd_ac97_update_power);
#endif /* CONFIG_SND_AC97_POWER_SAVE */
static void update_power_regs(struct snd_ac97 *ac97)
{
unsigned int power_up, bits;
int i;
#ifdef CONFIG_SND_AC97_POWER_SAVE
if (power_save)
power_up = ac97->power_up;
else {
#endif
power_up = (1 << PWIDX_FRONT) | (1 << PWIDX_ADC);
power_up |= (1 << PWIDX_MIC);
if (ac97->scaps & AC97_SCAP_SURROUND_DAC)
power_up |= (1 << PWIDX_SURR);
if (ac97->scaps & AC97_SCAP_CENTER_LFE_DAC)
power_up |= (1 << PWIDX_CLFE);
#ifdef CONFIG_SND_AC97_POWER_SAVE
}
#endif
if (power_up) {
if (ac97->regs[AC97_POWERDOWN] & AC97_PD_PR2) {
/* needs power-up analog mix and vref */
snd_ac97_update_bits(ac97, AC97_POWERDOWN,
AC97_PD_PR3, 0);
msleep(1);
snd_ac97_update_bits(ac97, AC97_POWERDOWN,
AC97_PD_PR2, 0);
}
}
for (i = 0; i < PWIDX_SIZE; i++) {
if (power_up & (1 << i))
bits = 0;
else
bits = power_regs[i].mask;
snd_ac97_update_bits(ac97, power_regs[i].power_reg,
power_regs[i].mask, bits);
}
if (! power_up) {
if (! (ac97->regs[AC97_POWERDOWN] & AC97_PD_PR2)) {
/* power down analog mix and vref */
snd_ac97_update_bits(ac97, AC97_POWERDOWN,
AC97_PD_PR2, AC97_PD_PR2);
snd_ac97_update_bits(ac97, AC97_POWERDOWN,
AC97_PD_PR3, AC97_PD_PR3);
}
}
}
#ifdef CONFIG_PM
/**
* snd_ac97_suspend - General suspend function for AC97 codec
......@@ -2484,6 +2673,7 @@ static int tune_mute_led(struct snd_ac97 *ac97)
msw->put = master_mute_sw_put;
snd_ac97_remove_ctl(ac97, "External Amplifier", NULL);
snd_ac97_update_bits(ac97, AC97_POWERDOWN, 0x8000, 0x8000); /* mute LED on */
ac97->scaps |= AC97_SCAP_EAPD_LED;
return 0;
}
......
......@@ -269,6 +269,7 @@ int snd_ac97_set_rate(struct snd_ac97 *ac97, int reg, unsigned int rate)
return -EINVAL;
}
snd_ac97_update_power(ac97, reg, 1);
switch (reg) {
case AC97_PCM_MIC_ADC_RATE:
if ((ac97->regs[AC97_EXTENDED_STATUS] & AC97_EA_VRM) == 0) /* MIC VRA */
......@@ -606,6 +607,7 @@ int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
goto error;
}
}
pcm->cur_dbl = r;
spin_unlock_irq(&pcm->bus->bus_lock);
for (i = 3; i < 12; i++) {
if (!(slots & (1 << i)))
......@@ -651,6 +653,21 @@ int snd_ac97_pcm_close(struct ac97_pcm *pcm)
unsigned short slots = pcm->aslots;
int i, cidx;
#ifdef CONFIG_SND_AC97_POWER_SAVE
int r = pcm->cur_dbl;
for (i = 3; i < 12; i++) {
if (!(slots & (1 << i)))
continue;
for (cidx = 0; cidx < 4; cidx++) {
if (pcm->r[r].rslots[cidx] & (1 << i)) {
int reg = get_slot_reg(pcm, cidx, i, r);
snd_ac97_update_power(pcm->r[r].codec[cidx],
reg, 0);
}
}
}
#endif
bus = pcm->bus;
spin_lock_irq(&pcm->bus->bus_lock);
for (i = 3; i < 12; i++) {
......@@ -660,6 +677,7 @@ int snd_ac97_pcm_close(struct ac97_pcm *pcm)
bus->used_slots[pcm->stream][cidx] &= ~(1 << i);
}
pcm->aslots = 0;
pcm->cur_dbl = 0;
spin_unlock_irq(&pcm->bus->bus_lock);
return 0;
}
......
......@@ -2251,6 +2251,16 @@ static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing)
/* ACLink on, 2 channels */
cnt = igetdword(chip, ICHREG(GLOB_CNT));
cnt &= ~(ICH_ACLINK | ICH_PCM_246_MASK);
#ifdef CONFIG_SND_AC97_POWER_SAVE
/* do cold reset - the full ac97 powerdown may leave the controller
* in a warm state but actually it cannot communicate with the codec.
*/
iputdword(chip, ICHREG(GLOB_CNT), cnt & ~ICH_AC97COLD);
cnt = igetdword(chip, ICHREG(GLOB_CNT));
udelay(10);
iputdword(chip, ICHREG(GLOB_CNT), cnt | ICH_AC97COLD);
msleep(1);
#else
/* finish cold or do warm reset */
cnt |= (cnt & ICH_AC97COLD) == 0 ? ICH_AC97COLD : ICH_AC97WARM;
iputdword(chip, ICHREG(GLOB_CNT), cnt);
......@@ -2265,6 +2275,7 @@ static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing)
return -EIO;
__ok:
#endif
if (probing) {
/* wait for any codec ready status.
* Once it becomes ready it should remain ready
......@@ -2485,7 +2496,7 @@ static int intel8x0_resume(struct pci_dev *pci)
card->shortname, chip);
chip->irq = pci->irq;
synchronize_irq(chip->irq);
snd_intel8x0_chip_init(chip, 1);
snd_intel8x0_chip_init(chip, 0);
/* re-initialize mixer stuff */
if (chip->device_type == DEVICE_INTEL_ICH4) {
......@@ -2615,6 +2626,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
/* not 48000Hz, tuning the clock.. */
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
}
#ifdef CONFIG_PROC_FS
......
......@@ -1277,7 +1277,18 @@ static int snd_via82xx_pcm_close(struct snd_pcm_substream *substream)
if (! ratep->used)
ratep->rate = 0;
spin_unlock_irq(&ratep->lock);
if (! ratep->rate) {
if (! viadev->direction) {
snd_ac97_update_power(chip->ac97,
AC97_PCM_FRONT_DAC_RATE, 0);
snd_ac97_update_power(chip->ac97,
AC97_PCM_SURR_DAC_RATE, 0);
snd_ac97_update_power(chip->ac97,
AC97_PCM_LFE_DAC_RATE, 0);
} else
snd_ac97_update_power(chip->ac97,
AC97_PCM_LR_ADC_RATE, 0);
}
viadev->substream = NULL;
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册