Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d0f42f786bc0e965918e0f422df25617a12a4021.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

objdump output can span across multiple sections:

  Disassembly of section .text:
    0000000000000008 <crc32c+0x8>:
       8:       48 89 e5                mov    %rsp,%rbp
       b:       53                      push   %rbx
       c:       8b 01                   mov    (%rcx),%eax
    <snip>
      6b:       90                      nop

  Disassembly of section .init.text:
    0000000000000008 <init_module+0x8>:
       8:       00 00                   add    %al,(%rax)
       a:       00 00                   add    %al,(%rax)
       c:       48 89 e5

Stop further reading if an address starts going backwards, assuming we
crossed sections.
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/9d1ea95e5f9884fdff1be6f761a2feabef37412c.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add -z parameter to avoid skipping zero blocks:

 ffffffff816704fe <sysret_check+0x4b>:
 ffffffff816704fe:  7b 34         jnp ffffffff81670534 <sysret_signal+0x1c>
       ...
 ffffffff81670501 <sysret_careful>:
 ffffffff81670501:  0f ba e2 03   bt  $0x3,%edx
 ffffffff81670505:  73 11         jae ffffffff81670518 <sysret_signal>
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/130c6267fbdb9af506633a9efa06f3269ff5bd2c.1441275982.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

objdump output can contain repeated bytes. At the moment test reads all
output sequentially, assuming each address is represented in output only
once:

  ffffffff8164efb3 <retint_swapgs+0x9>:
  ffffffff8164efb3:  c1 5d 00 eb        rcrl   $0xeb,0x0(%rbp)
  ffffffff8164efb7:  00 4c 8b 5c        add    %cl,0x5c(%rbx,%rcx,4)

  ffffffff8164efb8 <restore_c_regs_and_iret>:
  ffffffff8164efb8:  4c 8b 5c 24 30     mov    0x30(%rsp),%r11
  ffffffff8164efbd:  4c 8b 54 24 38     mov    0x38(%rsp),%r10

Store objdump output to buffer according to offset calculated from
address on each line.
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-l6812iuai3g486z3mn8ufan8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Showing actual trace event when deleteing perf events is only needed in
perf probe command.  But the add functionality itself can be used by
other places.  So move the printing code into the cmd_probe().

The output is not changed.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The del_perf_probe_events() does 2 things:

1. find existing events which match to filter
2. delete such trace events from kernel

But sometimes we need to do something with the trace events.  So split
the funtion into two, so that it can access intermediate trace events
name using strlist if needed.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Showing actual trace event when adding perf events is only needed in
perf probe command.  But the add functionality itself can be used by
other places.  So move the printing code into the cmd_probe().

Also it combines the output if more than one event is added.

Before:
  $ sudo perf probe -a do_fork -a do_exit
  Added new event:
  probe:do_fork        (on do_fork)

  You can now use it in all perf tools, such as:

      perf record -e probe:do_fork -aR sleep 1

  Added new events:
  probe:do_exit        (on do_exit)
  probe:do_exit_1      (on do_exit)

  You can now use it in all perf tools, such as:

      perf record -e probe:do_exit_1 -aR sleep 1

After:
  $ sudo perf probe -a do_fork -a do_exit
  Added new events:
  probe:do_fork        (on do_fork)
  probe:do_exit        (on do_exit)
  probe:do_exit_1      (on do_exit)

  You can now use it in all perf tools, such as:

      perf record -e probe:do_exit_1 -aR sleep 1
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch drops struct __event_package structure.  Instead, it adds a
'struct trace_probe_event' pointer to 'struct perf_probe_event'.

The trace_probe_event information gives further patches a chance to
access actual probe points and actual arguments.

Using them, 'perf probe' can get the whole list of added probes and
print them at once.

Other users like the upcoming bpf_loader will be able to attach one bpf
program to different probing points of an inline function (which has
multiple probing points) and glob functions.

Moreover, by reading the arguments information, bpf code for reading
those arguments can be generated.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-2-git-send-email-namhyung@kernel.org
[namhyung: extract necessary part from the existing patch]
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The add_perf_probe_events() does 3 things:

 1. convert all perf events to trace events
 2. add all trace events to kernel
 3. cleanup all trace events

But sometimes we need to do something with the trace events.  So split
the funtion into three, so that it can access intermediate trace events
via struct __event_package if needed.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for selecting and processing PERF_RECORD_SWITCH events for
use by Intel PT.  If they are available, they will be used in preference
to sched_switch events.

This enables an unprivileged user to trace multi-threaded or
multi-process workloads with any level of perf_event_paranoid.  However
it depends on kernel support for PERF_RECORD_SWITCH.

Without this patch, tracing a multi-threaded workload will decode
without error but all the data will be attributed to the main thread.

Without this patch, tracing a multi-process workload will result in
decoder errors because the decoder will not know which executable is
executing.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439458857-30636-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Need to check evsel before passing it to dump_sample().
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441283463-51050-5-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add xsavec, xsaves and xrstors to the op code map and the perf tools new
instructions test.  To run the test:

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'

For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add rdpkru and wrpkru to the op code map and the perf tools new
instructions test.  In the case of the test, only the bytes can be
tested at the moment since binutils doesn't support the instructions
yet.  To run the test:

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins" 2>&1 | grep pkru

For information about rdpkru and wrpkru, refer the Intel SDM.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Intel Architecture Instruction Set Extensions Programing Reference (Oct
2014) describes 3 new memory instructions, namely clflushopt, clwb and
pcommit.  Add them to the op code map and the perf tools new
instructions test. e.g.

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins"
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Intel SHA Extensions are explained in the Intel Architecture
Instruction Set Extensions Programing Reference (Oct 2014).
There are 7 new instructions.  Add them to the op code map
and the perf tools new instructions test. e.g.

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins" 2>&1 | grep sha

Committer note:

3 lines of details, for the curious:

  $ perf test -v "x86 ins" 2>&1 | grep sha256msg1 | tail -3
  Decoded ok: 0f 38 cc 84 08 78 56 34 12 	sha256msg1 0x12345678(%rax,%rcx,1),%xmm0
  Decoded ok: 0f 38 cc 84 c8 78 56 34 12 	sha256msg1 0x12345678(%rax,%rcx,8),%xmm0
  Decoded ok: 44 0f 38 cc bc c8 78 56 34 12 	sha256msg1 0x12345678(%rax,%rcx,8),%xmm15
  $
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The MPX instructions are presently not described in the SDM
opcode maps, and there are not encoding characters for bnd
registers, address method or operand type.  So the kernel
opcode map is using 'Gv' for bnd registers and 'Ev' for
everything else.  That is fine because the instruction
decoder does not use that information anyway, except as
an indication that there is a ModR/M byte.

Nevertheless, in some cases the 'Gv' and 'Ev' are the wrong
way around, BNDLDX and BNDSTX have 2 operands not 3, and it
wouldn't hurt to identify the mandatory prefixes.

This has no effect on the decoding of valid instructions,
but the addition of the mandatory prefixes will cause some
invalid instructions to error out that wouldn't have
previously.

Note that perf tools has a copy of the instruction decoder
and provides a test for new instructions which includes MPX
instructions e.g.

  $ perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ perf test -v "x86 ins"

Commiter notes:

And to see these MPX instructions specifically:

  $ perf test -v "x86 ins" 2>&1 | grep bndldx | head -3
  Decoded ok: 0f 1a 00             	bndldx (%eax),%bnd0
  Decoded ok: 0f 1a 05 78 56 34 12 	bndldx 0x12345678,%bnd0
  Decoded ok: 0f 1a 18             	bndldx (%eax),%bnd3
  $ perf test -v "x86 ins" 2>&1 | grep bndstx | head -3
  Decoded ok: 0f 1b 00             	bndstx %bnd0,(%eax)
  Decoded ok: 0f 1b 05 78 56 34 12 	bndstx %bnd0,0x12345678
  Decoded ok: 0f 1b 18             	bndstx %bnd3,(%eax)
  $
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a new test titled:

	Test x86 instruction decoder - new instructions

The purpose of this test is to check the instruction decoder after new
instructions have been added.  Initially, MPX instructions are tested
which are already supported, but the definitions in x86-opcode-map.txt
will be tweaked in a subsequent patch, after which this test can be run
to verify those changes.

The data for the test comes from assembly language instructions in
insn-x86-dat-src.c which is converted into bytes by the scripts
gen-insn-x86-dat.sh and gen-insn-x86-dat.awk, and included into the test
program insn-x86.c as insn-x86-dat-32.c and insn-x86-dat-64.c.

The conversion is not done as part of the perf tools build because the
test data must be under (git) change control in order for the test to be
repeatably-correct.  Also it may require a recent version of binutils.

Commiter notes:

Using it:

  # perf test decoder
  39: Test x86 instruction decoder - new instructions          : Ok
  # perf test -v decoder
  39: Test x86 instruction decoder - new instructions          :
  --- start ---
  test child forked, pid 21970
  Decoded ok: 0f 31                	rdtsc
  Decoded ok: f3 0f 1b 00          	bndmk  (%eax),%bnd0
  Decoded ok: f3 0f 1b 05 78 56 34 12 	bndmk  0x12345678,%bnd0
  Decoded ok: f3 0f 1b 18          	bndmk  (%eax),%bnd3
  <SNIP>
  Decoded ok: f2 e9 00 00 00 00    	bnd jmpq 402 <main+0x402>
  Decoded ok: f2 e9 00 00 00 00    	bnd jmpq 408 <main+0x408>
  Decoded ok: 67 f2 ff 21          	bnd jmpq *(%ecx)
  Decoded ok: f2 0f 85 00 00 00 00 	bnd jne 413 <main+0x413>
  test child finished with 0
  ---- end ----
  Test x86 instruction decoder - new instructions: Ok
  #
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf tools has a copy of the x86 instruction decoder used by the kernel.
The expectation is that the copy will be kept more-or-less in-synch with
the kernel version.  Consequently it is helpful to know if there are
differences.

This patch adds a check into the perf tools build so that a diff is done
on the sources, and a warning is printed if they are different.  Note
that the warning is not fatal and the build continues as normal.

The check is done as part of building the instruction decoder, so, like
a compiler warning, it is not seen unless the instruction decoder has to
be re-compiled. e.g.

  $ make -C tools/perf >/dev/null
  $ echo "/* blah */" >> tools/perf/util/intel-pt-decoder/inat_types.h
  $ make -C tools/perf >/dev/null
  Warning: Intel PT: x86 instruction decoder differs from kernel
  $ make -C tools/perf >/dev/null
  $
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving debugfs__strerror_open out of api/fs/debugfs.c, because it's not
debugfs specific. It'll be changed to consider tracefs mount as well in
following patches.

Renaming it into tracing_path__strerror_open_tp to fit into the
namespace. No functional change is intended.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Reviewed-by: NMatt Fleming <matt.fleming@intel.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Reviewed-by: NMatt Fleming <matt.fleming@intel.com>
Reviewed-by: NRaphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In a couple of cases the 'comm' member of 'union event' has been used
instead of the correct member ('fork') when processing exit events.

In the cases where it has been used incorrectly, only the 'pid' and
'tid' are affected.  The 'pid' value would be correct anyway because it
is in the same position in 'comm' and 'fork' events, but the 'tid' would
have been incorrectly assigned from 'ppid'.

However, for exit events, the kernel puts the current task in the 'ppid'
and 'ttid' which is the same as the exiting task.  That is 'ppid' ==
'pid' and if the task is not multi-threaded, 'pid' == 'tid' i.e. the
data goes wrong only when tracing multi-threaded programs.

It is hard to find an example of how this would produce an error in
practice.  There are 3 occurences of the fix:

1. perf script is only affected if !sample_id_all which only happens on
  old kernels.

2. intel_pt is only affected when decoding without timestamps
   and would probably still decode correctly - the exit event is
   only used to flush out data which anyway gets flushed at the
   end of the session

3. intel_bts also uses the exit event to flush data which
   would probably not cause errors as it would get flushed at
   the end of the session instead
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439888825-27708-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Renaming all functions touching tracing_path under same namespace. New
interface is:

  char tracing_path[];
  - tracing mount path

  char tracing_events_path[];
  - tracing mount/events path

  void tracing_path_set(const char *mountpoint);
  - setting directly tracing_path(_events), used by --debugfs-dir option

  const char *tracing_path_mount(void);
  - initial setup of tracing_(events)_path, called from perf.c
    mounts debugfs/tracefs if needed and possible

  char *get_tracing_file(const char *name);
  void put_tracing_file(char *file);
  - get/put tracing file path
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since 3b3eb044 running perf stat on a system without
backend-stalled-cycles spits out ugly warnings by default.

Since that is quite common, make the message a debug message only.

We know anyways that the counter wasn't read by the normal <unsupported>
output.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441147966-14917-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch stores the cpu socket_id and core_id in a perf.data header,
and reads them into the perf_env struct when processing perf.data files.

The changes modifies the CPU_TOPOLOGY section, making sure it is
backward/forward compatible.

The patch checks the section size before reading the core and socket ids.

It never reads data crossing the section boundary.  An old perf binary
without this patch can also correctly read the perf.data from a new perf
with this patch.

Because the new info is added at the end of the cpu_topology section, an
old perf tool ignores the extra data.

Examples:

1. New perf with this patch read perf.data from an old perf without the
   patch:

  $ perf_new report -i perf_old.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # Core ID and Socket ID information is not available
  # node0 meminfo  : total = 32823872 kB, free = 29315548 kB
  # node0 cpu list : 0-17,36-53
  ......

2. Old perf without the patch reads perf.data from a new perf with the
   patch:

  $ perf_old report -i perf_new.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # node0 meminfo  : total = 32823872 kB, free = 29190932 kB
  # node0 cpu list : 0-17,36-53
  ......

3. New perf read new perf.data:

  $ perf_new report -i perf_new.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # CPU 0: Core ID 0, Socket ID 0
  # CPU 1: Core ID 1, Socket ID 0
  ......
  # CPU 61: Core ID 10, Socket ID 1
  # CPU 62: Core ID 11, Socket ID 1
  # CPU 63: Core ID 16, Socket ID 1
  # node0 meminfo  : total = 32823872 kB, free = 29190932 kB
  # node0 cpu list : 0-17,36-53
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-2-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch moves the code which reads core_id and socket_id into
separate functions.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Support helper function __get_dynamic_array_len() in libtraceevent, this
function is used accompany with __print_array() or __print_hex(), but
currently it is not an available function in the function list of
process_function().

The total allocated length of the dynamic array is embedded in the top
half of __data_loc_##item field. This patch adds new arg type
PRINT_DYNAMIC_ARRAY_LEN to return the length to eval_num_arg(),
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-32-git-send-email-wangnan0@huawei.comSigned-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch copies filter.h from include/linux/kernel.h to
tools/include/linux/filter.h to enable other libraries to use macros in it,
like libbpf which will be introduced by further patches.

Currently, the filter.h copy only contains the useful macros needed by
libbpf for not introducing too much dependence.

tools/perf/MANIFEST is also updated for 'make perf-*-src-pkg'.

One change:
  The 'imm' field of BPF_EMIT_CALL becomes ((FUNC) - BPF_FUNC_unspec) to
  suit user space code generator.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-22-git-send-email-wangnan0@huawei.comSigned-off-by: NWang Nan <wangnan0@huawei.com>
[ Removed stylistic changes, so that a diff to the original file gets reduced ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When profiling the kernel with the 'srcfile' sort key it's common to
"get stuck" in include. For example a lot of code uses current or other
inlines, so they get accounted to some random include file. This is not
very useful as a high level categorization.

For example just profiling the idle loop usually shows mostly inlines,
so you never see the actual cpuidle file.

This patch changes the 'srcfile' sort key to always unwind the inline
stack using BFD/DWARF. So we always account to the base function that
called the inline.

In a few cases include is still shown (for example for MSR accesses),
but that is because they get inlining expanded as part of assigning to a
global function pointer. For the majority it works fine though.

v2: Use simpler while loop. Add maximum iteration count.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441133239-31254-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commit changed parse_events_add_pmu interface:
  36adec85 perf tools: Change parse_events_add_pmu interface

but forgot to change one caller. Because of lessen compilation rules for
the bison parser, the compiler did not warn on that.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 36adec85 ("perf tools: Change parse_events_add_pmu interface")
Link: http://lkml.kernel.org/r/1441180605-24737-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch makes perf compile on non x86 platforms by defining a weak
symbol for sample_reg_masks[] in util/perf_regs.c.

The patch also moves the REG() and REG_END() macros into the
util/per_regs.h header file. The macros are renamed to
SMPL_REG/SMPL_REG_END to avoid clashes with other header files.
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441099814-26783-1-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I hit following building error randomly:

    ...
  /bin/sh: /path/to/kernel/buildperf/util/intel-pt-decoder/inat-tables.c: No such file or directory
    ...
    LINK     /path/to/kernel/buildperf/plugin_mac80211.so
    LINK     /path/to/kernel/buildperf/plugin_kmem.so
    LINK     /path/to/kernel/buildperf/plugin_xen.so
    LINK     /path/to/kernel/buildperf/plugin_hrtimer.so
  In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:25:0:
  util/intel-pt-decoder/inat.c:24:25: fatal error: inat-tables.c: No such file or directory
   #include "inat-tables.c"
                           ^
  compilation terminated.
  make[4]: *** [/path/to/kernel/buildperf/util/intel-pt-decoder/intel-pt-insn-decoder.o] Error 1
  make[4]: *** Waiting for unfinished jobs....
    LINK     /path/to/kernel/buildperf/plugin_function.so

This is caused by tools/perf/util/intel-pt-decoder/Build that, it tries
to generate $(OUTPUT)util/intel-pt-decoder/inat-tables.c atomatically
but forget to ensure the existance of $(OUTPUT)util/intel-pt-decoder
directory.

This patch fixes it by adding $(call rule_mkdir) like other similar rules.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441087005-107540-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There is a problem in the dwarf-regs.c files for sh, sparc and x86 where
it is possible to make an out-of-bounds array access when searching for
register names.

This patch fixes it by replacing '<=' to '<', so when register (number
== XXX_MAX_REGS), get_arch_regstr() will return NULL.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Reviewed-by: NMatt Fleming <matt@console-pimps.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@huawei.com
Link: http://lkml.kernel.org/r/1441078184-105038-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.

The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.

With no parameter, the --intr-regs still records all possible registers
based on the architecture.

To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:

  $ perf record --intr-regs=si,di,r8,r9 .....

To record any possible registers:

  $ perf record -I .....
  $ perf report --intr-regs ...

To display the register, one can use perf report -D

To list the available registers:

  $ perf record --intr-regs=\?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: NStephane Eranian <eranian@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds a way to locate a register identifier (PERF_X86_REG_*)
based on its name, e.g., AX.

This will be used by a subsequent patch to improved flexibility of perf
record.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the output of the interrupted machine state (iregs) to
perf script. It presents them  as NAME:VALUE so this is easy to parse
during post processing.

To capture the interrupted machine state:
   $ perf record -I ....

to display iregs, use the -F option:

   $ perf script -F ip,iregs
   40afc2   AX:0x6c5770    BX:0x1e    CX:0x5f4d80a    DX:0x101010101010101    SI:0x1
Signed-off-by: NStephane Eranian <eranian@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-2-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

An evsel may have different cpus and threads than the evlist it is in.

Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this patch there's no way to connect a loaded bpf object
to its source file. However, during applying perf's '--filter' to BPF
object, without this connection makes things harder, because perf loads
all programs together, but '--filter' setting is for each object.

The API of bpf_object__open_buffer() is changed to allow passing a name.
Fortunately, at this time there's only one user of it (perf test LLVM),
so we change it together.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440742821-44548-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is theoretically possible to process perf.data files created on x86
and that contain Intel PT or Intel BTS data, on any other architecture,
which is why it is possible for there to be build errors on powerpc
caused by pt/bts.

The errors were:

	util/intel-pt-decoder/intel-pt-insn-decoder.c: In function ‘intel_pt_insn_decoder’:
	util/intel-pt-decoder/intel-pt-insn-decoder.c:138:3: error: switch missing default case [-Werror=switch-default]
	   switch (insn->immediate.nbytes) {
	   ^
	cc1: all warnings being treated as errors

	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_synth_branch_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:871: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:915: undefined reference to `tsc_to_perf_time'
	sources/linux-acme.git/tools/perf/util/intel-pt.c:962: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_process_event':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:1454: undefined reference to `perf_time_to_tsc'
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441046384-28663-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>