Making tracing_path__strerror_open_tp message generic by mentioning both
debugfs/tracefs words in error message plus the tracing_path instead of
debugfs_mountpoint.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-7-git-send-email-jolsa@kernel.org
[ Add comment for the ENOENT case out of this patch discussion thread ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d0f42f786bc0e965918e0f422df25617a12a4021.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

objdump output can span across multiple sections:

  Disassembly of section .text:
    0000000000000008 <crc32c+0x8>:
       8:       48 89 e5                mov    %rsp,%rbp
       b:       53                      push   %rbx
       c:       8b 01                   mov    (%rcx),%eax
    <snip>
      6b:       90                      nop

  Disassembly of section .init.text:
    0000000000000008 <init_module+0x8>:
       8:       00 00                   add    %al,(%rax)
       a:       00 00                   add    %al,(%rax)
       c:       48 89 e5

Stop further reading if an address starts going backwards, assuming we
crossed sections.
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/9d1ea95e5f9884fdff1be6f761a2feabef37412c.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add -z parameter to avoid skipping zero blocks:

 ffffffff816704fe <sysret_check+0x4b>:
 ffffffff816704fe:  7b 34         jnp ffffffff81670534 <sysret_signal+0x1c>
       ...
 ffffffff81670501 <sysret_careful>:
 ffffffff81670501:  0f ba e2 03   bt  $0x3,%edx
 ffffffff81670505:  73 11         jae ffffffff81670518 <sysret_signal>
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/130c6267fbdb9af506633a9efa06f3269ff5bd2c.1441275982.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

objdump output can contain repeated bytes. At the moment test reads all
output sequentially, assuming each address is represented in output only
once:

  ffffffff8164efb3 <retint_swapgs+0x9>:
  ffffffff8164efb3:  c1 5d 00 eb        rcrl   $0xeb,0x0(%rbp)
  ffffffff8164efb7:  00 4c 8b 5c        add    %cl,0x5c(%rbx,%rcx,4)

  ffffffff8164efb8 <restore_c_regs_and_iret>:
  ffffffff8164efb8:  4c 8b 5c 24 30     mov    0x30(%rsp),%r11
  ffffffff8164efbd:  4c 8b 54 24 38     mov    0x38(%rsp),%r10

Store objdump output to buffer according to offset calculated from
address on each line.
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We currently use PERF_EVENT_TXN flag to determine if we are in the middle
of a transaction. If in a transaction, we defer the schedulability checks
from pmu->add() operation to the pmu->commit() operation.

Now that we have "transaction types" (PERF_PMU_TXN_ADD, PERF_PMU_TXN_READ)
we can use the type to determine if we are in a transaction and drop the
PERF_EVENT_TXN flag.

When PERF_EVENT_TXN is dropped, the cpuhw->group_flag on some architectures
becomes unused, so drop that field as well.

This is an extension of the Powerpc patch from Peter Zijlstra to s390,
Sparc and x86 architectures.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-11-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 24x7 counters in Powerpc allow monitoring a large number of counters
simultaneously. They also allow reading several counters in a single
HCALL so we can get a more consistent snapshot of the system.

Use the PMU's transaction interface to monitor and read several event
counters at once. The idea is that users can group several 24x7 events
into a single group of events. We use the following logic to submit
the group of events to the PMU and read the values:

	pmu->start_txn()		// Initialize before first event

	for each event in group
		pmu->read(event);	// Queue each event to be read

	pmu->commit_txn()		// Read/update all queuedcounters

The ->commit_txn() also updates the event counts in the respective
perf_event objects.  The perf subsystem can then directly get the
event counts from the perf_event and can avoid submitting a new
->read() request to the PMU.

Thanks to input from Peter Zijlstra.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-10-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Define a new PERF_PMU_TXN_READ interface to read a group of counters
at once.

        pmu->start_txn()                // Initialize before first event

        for each event in group
                pmu->read(event);       // Queue each event to be read

        rc = pmu->commit_txn()          // Read/update all queued counters

Note that we use this interface with all PMUs.  PMUs that implement this
interface use the ->read() operation to _queue_ the counters to be read
and use ->commit_txn() to actually read all the queued counters at once.

PMUs that don't implement PERF_PMU_TXN_READ ignore ->start_txn() and
->commit_txn() and continue to read counters one at a time.

Thanks to input from Peter Zijlstra.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-9-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we implement the ability to read several counters at once (using
the PERF_PMU_TXN_READ transaction interface), perf_event_read() can
fail when the 'group' parameter is true (eg: trying to read too many
events at once).

For now, have perf_event_read() return an integer. Ignore the return
value when the 'group' parameter is false.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-8-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In order to enable the use of perf_event_read(.group = true), we need
to invert the sibling-child loop nesting of perf_read_group().

Currently we iterate the child list for each sibling, this precludes
using group reads. Flip things around so we iterate each group for
each child.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Made the patch compile and things. ]
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-7-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Enable perf_event_read() to update entire groups at once, this will be
useful for read transactions.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20150723080435.GE25159@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

In order to free up the perf_event_read_group() name:

 s/perf_event_read_\(one\|group\)/perf_read_\1/g
 s/perf_read_hw/__perf_read/g
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-5-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

perf_event_read() does two things:

	- call the PMU to read/update the counter value, and
	- compute the total count of the event and its children

Not all callers need both. perf_event_reset() for instance needs the
first piece but doesn't need the second.  Similarly, when we implement
the ability to read a group of events using the transaction interface,
we would need the two pieces done independently.

Break up perf_event_read() and have it just read/update the counter
and have the callers compute the total count if necessary.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-4-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently, the PMU interface allows reading only one counter at a time.
But some PMUs like the 24x7 counters in Power, support reading several
counters at once. To leveage this functionality, extend the transaction
interface to support a "transaction type".

The first type, PERF_PMU_TXN_ADD, refers to the existing transactions,
i.e. used to _schedule_ all the events on the PMU as a group. A second
transaction type, PERF_PMU_TXN_READ, will be used in a follow-on patch,
by the 24x7 counters to read several counters at once.

Extend the transaction interfaces to the PMU to accept a 'txn_flags'
parameter and use this parameter to ignore any transactions that are
not of type PERF_PMU_TXN_ADD.

Thanks to Peter Zijlstra for his input.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[peterz: s390 compile fix]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1441336073-22750-3-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In ->commit_txn() 'cpuc' is already initialized when it is
declared, so we can remove the duplicate assignment.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1441336073-22750-2-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If KVM does not support INTEL_PT, guest MSR_IA32_RTIT_CTL reading will
produce host warning like "kvm [2469]: vcpu0 unhandled rdmsr: 0x570".

Guest can determine whether the CPU supports Intel_PT according to CPUID,
so test_cpu_cap function is added before rdmsr,and it is more in line with
the code style.
Signed-off-by: NHuaitong Han <huaitong.han@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1441009262-9792-1-git-send-email-huaitong.han@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

cgroup_exit() is not called from copy_process() after commit:

  e8604cb4 ("cgroup: fix spurious lockdep warning in cgroup_exit()")

from do_exit(). So this check is useless and the comment is obsolete.
Signed-off-by: NKirill Tkhai <ktkhai@odin.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/55E444C8.3020402@odin.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes an issue which introduced by commit
1a78d937 ("perf/x86/intel: Streamline
LBR MSR handling in PMI").

The old patch not only avoids writing LBR_SELECT MSR in PMI, but also
avoids updating lbr_select variable. So in PMI, FREEZE_LBRS_ON_PMI bit
is always mistakenly set for IA32_DEBUGCTLMSR MSR, which causes
superfluous increase/decrease of LBR_TOS when collecting LBR callstack.
Reported-by: NMilian Wolff <mail@milianw.de>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1439815051-8616-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

BTS leaks kernel addresses even in userspace-only mode due to imprecise IP
sampling, so sometimes syscall entry points or page fault handler addresses
end up in a userspace trace.

Now, intel_bts driver exports trace data zero-copy, it does not scan through
it to filter out the kernel addresses and it's would be a O(n) job.

To work around this situation, this patch forbids the use of intel_bts
driver by unprivileged users on systems with the paranoid setting above the
(kernel's) default "1", which still allows kernel profiling. In other words,
using intel_bts driver implies kernel tracing, regardless of the
"exclude_kernel" attribute setting.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1441030168-6853-3-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

BTS leaks kernel addresses even in userspace-only mode due to imprecise IP
sampling, so sometimes syscall entry points or page fault handler addresses
end up in a userspace trace.

Since this driver uses a relatively small buffer for BTS records and it has
to iterate through them anyway, it can also take on the additional job of
filtering out the records that contain kernel addresses when kernel space
tracing is not enabled.

This patch changes the bts code to skip the offending records from perf
output. In order to request the exact amount of space on the ring buffer,
we need to do an extra pass through the records to know how many there are
of the valid ones, but considering the small size of the buffer, this extra
pass adds very little overhead to the nmi handler. This way we won't end
up with awkward IP samples with zero IPs in the perf stream.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When TSC is stable perf/sched clock is based on it.
However the conversion from cycles to nanoseconds
is not as accurate as it could be.  Because
CYC2NS_SCALE_FACTOR is 10, the accuracy is +/- 1/2048

The change is to calculate the maximum shift that
results in a multiplier that is still a 32-bit number.
For example all frequencies over 1 GHz will have
a shift of 32, making the accuracy of the conversion
+/- 1/(2^33).  That is achieved by using the
'clocks_calc_mult_shift()' function.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1440147918-22250-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Sasha reported that we can get here with .idx==-1, and
cpuc->event_constraints unallocated.
Suggested-by: NStephane Eranian <eranian@google.com>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Fixes: b371b594 ("perf/x86: Fix event/group validation")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull CRIS updates from Jesper Nilsson:
 "Mostly removal of old cruft of which we can use a generic version, or
  fixes for code not commonly run in the cris port, but also additions
  to enable some good debug"

* tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
  CRISv10: delete unused lib/dmacopy.c
  CRISv10: delete unused lib/old_checksum.c
  CRIS: fix switch_mm() lockdep splat
  CRISv32: enable LOCKDEP_SUPPORT
  CRIS: add STACKTRACE_SUPPORT
  CRISv32: annotate irq enable in idle loop
  CRISv32: add support for irqflags tracing
  CRIS: UAPI: use generic types.h
  CRIS: UAPI: use generic shmbuf.h
  CRIS: UAPI: use generic msgbuf.h
  CRIS: UAPI: use generic socket.h
  CRIS: UAPI: use generic sembuf.h
  CRIS: UAPI: use generic sockios.h
  CRIS: UAPI: use generic auxvec.h
  CRIS: UAPI: use generic headers via Kbuild
  CRIS: UAPI: fix elf.h export
  CRIS: don't make asm/elf.h depend on asm/user.h
  CRIS: UAPI: fix ptrace.h
  CRISv32: Squash compile warnings for axisflashmap
  CRISv32: Add GPIO driver to the default configs
  ...

rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.

Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct

    switch (rq_data_dir(req)) {
        case READ:
            ...
        case WRITE:
            ...

that we have in a few drivers.

Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:

  drivers/block/hd.c: In function ‘hd_request’:
  drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
     switch (rq_data_dir(req)) {

The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.

But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up the writeback plugging introduced in commit d353d758
("writeback: plug writeback at a high level") that then caused problems
due to the unplug happening with a spinlock held.

* writeback-plugging:
  writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
  Revert "writeback: plug writeback at a high level"

We had to revert the pluggin in writeback_sb_inodes() because the
wb->list_lock is held, but we could easily plug at a higher level before
taking that lock, and unplug after releasing it.  This does that.

Chris will run performance numbers, just to verify that this approach is
comparable to the alternative (we could just drop and re-take the lock
around the blk_finish_plug() rather than these two commits.

I'd have preferred waiting for actual performance numbers before picking
one approach over the other, but I don't want to release rc1 with the
known "sleeping function called from invalid context" issue, so I'll
pick this cleanup version for now.  But if the numbers show that we
really want to plug just at the writeback_sb_inodes() level, and we
should just play ugly games with the spinlock, we'll switch to that.

Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I didn't notice this when merging the thermal code from Zhang, but his
merge (commit 5a924a07: "Merge branches 'thermal-core' and
'thermal-intel' of .git into next") of the thermal-core and
thermal-intel branches was wrong.

In thermal-core, commit 17e8351a ("thermal: consistently use int for
temperatures") converted the thermal layer to use "int" for
temperatures.

But in parallel, in the thermal-intel branch commit d0a12625
("thermal: Add Intel PCH thermal driver") added support for the intel
PCH thermal sensor using the old interfaces that used "unsigned long"
pointers.

This resulted in warnings like this:

  drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
    .get_temp = pch_thermal_get_temp,
                ^
  drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’)
  drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
    .get_trip_temp = pch_get_trip_temp,
                     ^
  drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’)

This fixes it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge fourth patch-bomb from Andrew Morton:

 - sys_membarier syscall

 - seq_file interface changes

 - a few misc fixups

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
  mm/early_ioremap: add explicit #include of asm/early_ioremap.h
  fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
  selftests: enhance membarrier syscall test
  selftests: add membarrier syscall test
  sys_membarrier(): system-wide memory barrier (generic, x86)
  MODSIGN: fix a compilation warning in extract-cert

Newer bitfiles needs the reduced clk even for SMP builds

Cc: <stable@vger.kernel.org>  #4.2
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NTB fixes from Jon Mason:
 "NTB bug and documentation fixes, new device IDs, performance
  improvements, and adding a mailing list to MAINTAINERS for NTB"

* tag 'ntb-4.3' of git://github.com/jonmason/ntb:
  NTB: Fix range check on memory window index
  NTB: Improve index handling in B2B MW workaround
  NTB: Fix documentation for ntb_peer_db_clear.
  NTB: Fix documentation for ntb_link_is_up
  NTB: Use unique DMA channels for TX and RX
  NTB: Remove dma_sync_wait from ntb_async_rx
  NTB: Clean up QP stats info
  NTB: Make the transport list in order of discovery
  NTB: Add PCI Device IDs for Broadwell Xeon
  NTB: Add flow control to the ntb_netdev
  NTB: Add list to MAINTAINERS

Pull more input updates from Dmitry Torokhov:
 "Second round of updates for the input subsystem.

  This introduces two brand new touchscreen drivers (Colibri and
  imx6ul_tsc), some small driver fixes, and we are no longer report
  errors from evdev_flush() as users do not really have a way of
  handling errors, error codes that we were returning were not on the
  list of errors supposed to be returned by close(), and errors were
  causing issues with one of older versions of systemd"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: imx_keypad - remove obsolete comment
  Input: touchscreen - add imx6ul_tsc driver support
  Input: Add touchscreen support for Colibri VF50
  Input: i8042 - lower log level for "no controller" message
  Input: evdev - do not report errors form flush()
  Input: elants_i2c - extend the calibration timeout to 12 seconds
  Input: sparcspkr - fix module autoload for OF platform drivers
  Input: regulator-haptic - fix module autoload for OF platform driver
  Input: pwm-beeper - fix module autoload for OF platform driver
  Input: ab8500-ponkey - Fix module autoload for OF platform driver
  Input: cyttsp - remove unnecessary MODULE_ALIAS()
  Input: elan_i2c - add ACPI ID "ELAN1000"

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previous PM+ACPI
  pull request (cpufreq core and drivers, cpuidle, generic power domains
  framework).  Some of them didn't make to that pull request and some
  fix issues introduced by it.

  The only really new thing is the support for suspend frequency in the
  cpufreq-dt driver, but it is needed to fix an issue with Exynos
  platforms.

  Specifics:

   - build fix for the new Mediatek MT8173 cpufreq driver (Guenter
     Roeck).

   - generic power domains framework fixes (power on error code path,
     subdomain removal) and cleanup of a deprecated API user (Geert
     Uytterhoeven, Jon Hunter, Ulf Hansson).

   - cpufreq-dt driver fixes including two fixes for bugs related to the
     new Operating Performance Points Device Tree bindings introduced
     recently (Viresh Kumar).

   - suspend frequency support for the cpufreq-dt driver (Bartlomiej
     Zolnierkiewicz, Viresh Kumar).

   - cpufreq core cleanups (Viresh Kumar).

   - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).

   - additional sanity check in the cpuidle core (Xunlei Pang).

   - fix for a comment related to CPU power management (Lina Iyer)"

* tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_pstate: fix PCT_TO_HWP macro
  intel_pstate: Fix user input of min/max to legal policy region
  PM / OPP: Return suspend_opp only if it is enabled
  cpufreq-dt: add suspend frequency support
  cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency
  PM / OPP: add dev_pm_opp_get_suspend_opp() helper
  staging: board: Migrate away from __pm_genpd_name_add_device()
  cpufreq: Use __func__ to print function's name
  cpufreq: staticize cpufreq_cpu_get_raw()
  PM / Domains: Ensure subdomain is not in use before removing
  cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL
  cpuidle/coupled: Add sanity check for safe_state_index
  PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
  cpufreq: dt: Tolerance applies on both sides of target voltage
  cpufreq: dt: Print error on failing to mark OPPs as shared
  cpufreq: dt: Check OPP count before marking them shared
  kernel/cpu_pm: fix cpu_cluster_pm_exit comment

Pull SCSI target updates from Nicholas Bellinger:
 "Here are the outstanding target-pending updates for v4.3-rc1.

  Mostly bug-fixes and minor changes this round.  The fallout from the
  big v4.2-rc1 RCU conversion have (thus far) been minimal.

  The highlights this round include:

   - Move sense handling routines into scsi_common code (Sagi)

   - Return ABORTED_COMMAND sense key for PI errors (Sagi)

   - Add tpg_enabled_sendtargets attribute for disabled iscsi-target
     discovery (David)

   - Shrink target struct se_cmd by rearranging fields (Roland)

   - Drop iSCSI use of mutex around max_cmd_sn increment (Roland)

   - Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy +
     Chris)

   - Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu +
     nab)

   - Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits)
  target: use stringify.h instead of own definition
  target/user: Fix UFLAG_UNKNOWN_OP handling
  target: Remove no-op conditional
  target/user: Remove unused variable
  target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
  target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
  target/qla2xxx: Honor max_data_sg_nents I/O transfer limit
  target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage
  target/iscsi: Replace conn->login_ip with login_sockaddr
  target/iscsi: Keep local_ip as the actual sockaddr
  target/iscsi: Fix np_ip bracket issue by removing np_ip
  target: Drop iSCSI use of mutex around max_cmd_sn increment
  qla2xxx: Update tcm_qla2xxx module description to 24xx+
  iscsi-target: Add tpg_enabled_sendtargets for disabled discovery
  drivers: target: Drop unlikely before IS_ERR(_OR_NULL)
  target: check DPO/FUA usage for COMPARE AND WRITE
  target: Shrink struct se_cmd by rearranging fields
  target: Remove cmd->se_ordered_id (unused except debug log lines)
  target: add support for START_STOP_UNIT SCSI opcode
  target: improve unsupported opcode message
  ...

Pull second round of SCSI updates from James Bottomley:
 "There's one late arriving patch here (added today), fixing a build
  issue which the scsi_dh patch set in here uncovered.  Other than that,
  everything has been incubated in -next and the checkers for a week.

  The major pieces of this patch are a set patches facilitating better
  integration between scsi and scsi_dh (the device handling layer used
  by multi-path; all the dm parts are acked by Mike Snitzer).

  This also includes driver updates for mp3sas, scsi_debug and an
  assortment of bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits)
  scsi_dh: fix randconfig build error
  scsi: fix scsi_error_handler vs. scsi_host_dev_release race
  fcoe: Convert use of __constant_htons to htons
  mpt2sas: setpci reset kernel oops fix
  pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY
  lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2()
  bfa: Fix incorrect de-reference of pointer
  bfa: Fix indentation
  scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs.
  scsi_debug: resp_request: remove unused variable
  scsi_debug: fix REPORT LUNS Well Known LU
  scsi_debug: schedule_resp fix input variable check
  scsi_debug: make dump_sector static
  scsi_debug: vfree is null safe so drop the check
  scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS;
  scsi_debug: define pr_fmt() for consistent logging
  mpt2sas: Refcount fw_events and fix unsafe list usage
  mpt2sas: Refcount sas_device objects and fix unsafe list usage
  scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate()
  scsi_dh: don't allow to detach device handlers at runtime
  ...

Pull media updates from Mauro Carvalho Chehab:
 "A series of patches that move part of the code used to allocate memory
  from the media subsystem to the mm subsystem"

[ The mm parts have been acked by VM people, and the series was
  apparently in -mm for a while   - Linus ]

* tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  [media] media: vb2: Remove unused functions
  [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector
  [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector
  [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector
  [media] vb2: Provide helpers for mapping virtual addresses
  [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns()
  [media] mm: Provide new get_vaddr_frames() helper
  [media] vb2: Push mmap_sem down to memops

Pull edac updates from Mauro Carvalho Chehab:
 "Two EDAC fixes for Intel systems (Haswell and Ivy Bridge)"

* tag 'edac/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: correctly fetch DIMM width on Ivy Bridge and Haswell
  sb_edac: look harder for DDRIO on Haswell systems