There is a new version of DMC available for KBL.

The release notes mentions:
1. Fix for the issue where DC_STATE was getting enabled even
when disabled by driver causing data corruption.

v2: Remove pull request from commit message (Rodrigo).

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510253503-12634-1-git-send-email-anusha.srivatsa@intel.com

Since commit 6060b6ae ("drm/i915/pmu: Add RC6 residency metrics"),
vlv_residency_raw() may be called from an irq-disabled context (via perf
event sampling on remote cpu). As such, we can no longer assume that we
are called from process context and must save/restore the irq state for
the spinlock.

Fixes: 6060b6ae ("drm/i915/pmu: Add RC6 residency metrics")
Testcase: igt/perf_pmu/other-init-3
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122222510.22627-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

We don't need struct_mutex to initialise userptr (it just allocates a
workqueue for itself etc), but we do need struct_mutex later on in
i915_gem_init() in order to feed requests onto the HW.

This should break the chain

[  385.697902] ======================================================
[  385.697907] WARNING: possible circular locking dependency detected
[  385.697913] 4.14.0-CI-Patchwork_7234+ #1 Tainted: G     U
[  385.697917] ------------------------------------------------------
[  385.697922] perf_pmu/2631 is trying to acquire lock:
[  385.697927]  (&mm->mmap_sem){++++}, at: [<ffffffff811bfe1e>] __might_fault+0x3e/0x90
[  385.697941]
               but task is already holding lock:
[  385.697946]  (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[  385.697957]
               which lock already depends on the new lock.

[  385.697963]
               the existing dependency chain (in reverse order) is:
[  385.697970]
               -> #4 (&cpuctx_mutex){+.+.}:
[  385.697980]        __mutex_lock+0x86/0x9b0
[  385.697985]        perf_event_init_cpu+0x5a/0x90
[  385.697991]        perf_event_init+0x178/0x1a4
[  385.697997]        start_kernel+0x27f/0x3f1
[  385.698003]        verify_cpu+0x0/0xfb
[  385.698006]
               -> #3 (pmus_lock){+.+.}:
[  385.698015]        __mutex_lock+0x86/0x9b0
[  385.698020]        perf_event_init_cpu+0x21/0x90
[  385.698025]        cpuhp_invoke_callback+0xca/0xc00
[  385.698030]        _cpu_up+0xa7/0x170
[  385.698035]        do_cpu_up+0x57/0x70
[  385.698039]        smp_init+0x62/0xa6
[  385.698044]        kernel_init_freeable+0x97/0x193
[  385.698050]        kernel_init+0xa/0x100
[  385.698055]        ret_from_fork+0x27/0x40
[  385.698058]
               -> #2 (cpu_hotplug_lock.rw_sem){++++}:
[  385.698068]        cpus_read_lock+0x39/0xa0
[  385.698073]        apply_workqueue_attrs+0x12/0x50
[  385.698078]        __alloc_workqueue_key+0x1d8/0x4d8
[  385.698134]        i915_gem_init_userptr+0x5f/0x80 [i915]
[  385.698176]        i915_gem_init+0x7c/0x390 [i915]
[  385.698213]        i915_driver_load+0x99e/0x15c0 [i915]
[  385.698250]        i915_pci_probe+0x33/0x90 [i915]
[  385.698256]        pci_device_probe+0xa1/0x130
[  385.698262]        driver_probe_device+0x293/0x440
[  385.698267]        __driver_attach+0xde/0xe0
[  385.698272]        bus_for_each_dev+0x5c/0x90
[  385.698277]        bus_add_driver+0x16d/0x260
[  385.698282]        driver_register+0x57/0xc0
[  385.698287]        do_one_initcall+0x3e/0x160
[  385.698292]        do_init_module+0x5b/0x1fa
[  385.698297]        load_module+0x2374/0x2dc0
[  385.698302]        SyS_finit_module+0xaa/0xe0
[  385.698307]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698311]
               -> #1 (&dev->struct_mutex){+.+.}:
[  385.698320]        __mutex_lock+0x86/0x9b0
[  385.698361]        i915_mutex_lock_interruptible+0x4c/0x130 [i915]
[  385.698403]        i915_gem_fault+0x206/0x760 [i915]
[  385.698409]        __do_fault+0x1a/0x70
[  385.698413]        __handle_mm_fault+0x7c4/0xdb0
[  385.698417]        handle_mm_fault+0x154/0x300
[  385.698440]        __do_page_fault+0x2d6/0x570
[  385.698445]        page_fault+0x22/0x30
[  385.698449]
               -> #0 (&mm->mmap_sem){++++}:
[  385.698459]        lock_acquire+0xaf/0x200
[  385.698464]        __might_fault+0x68/0x90
[  385.698470]        _copy_to_user+0x1e/0x70
[  385.698475]        perf_read+0x1aa/0x290
[  385.698480]        __vfs_read+0x23/0x120
[  385.698484]        vfs_read+0xa3/0x150
[  385.698488]        SyS_read+0x45/0xb0
[  385.698493]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698497]
               other info that might help us debug this:

[  385.698505] Chain exists of:
                 &mm->mmap_sem --> pmus_lock --> &cpuctx_mutex

[  385.698517]  Possible unsafe locking scenario:

[  385.698522]        CPU0                    CPU1
[  385.698526]        ----                    ----
[  385.698529]   lock(&cpuctx_mutex);
[  385.698553]                                lock(pmus_lock);
[  385.698558]                                lock(&cpuctx_mutex);
[  385.698564]   lock(&mm->mmap_sem);
[  385.698568]
                *** DEADLOCK ***

[  385.698574] 1 lock held by perf_pmu/2631:
[  385.698578]  #0:  (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[  385.698589]
               stack backtrace:
[  385.698595] CPU: 3 PID: 2631 Comm: perf_pmu Tainted: G     U          4.14.0-CI-Patchwork_7234+ #1
[  385.698602] Hardware name:                  /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017
[  385.698609] Call Trace:
[  385.698615]  dump_stack+0x5f/0x86
[  385.698621]  print_circular_bug.isra.18+0x1d0/0x2c0
[  385.698627]  __lock_acquire+0x19c3/0x1b60
[  385.698634]  ? generic_exec_single+0x77/0xe0
[  385.698640]  ? lock_acquire+0xaf/0x200
[  385.698644]  lock_acquire+0xaf/0x200
[  385.698650]  ? __might_fault+0x3e/0x90
[  385.698655]  __might_fault+0x68/0x90
[  385.698660]  ? __might_fault+0x3e/0x90
[  385.698665]  _copy_to_user+0x1e/0x70
[  385.698670]  perf_read+0x1aa/0x290
[  385.698675]  __vfs_read+0x23/0x120
[  385.698682]  ? __fget+0x101/0x1f0
[  385.698686]  vfs_read+0xa3/0x150
[  385.698691]  SyS_read+0x45/0xb0
[  385.698696]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  385.698701] RIP: 0033:0x7ff1c46876ed
[  385.698705] RSP: 002b:00007fff13552f90 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
[  385.698712] RAX: ffffffffffffffda RBX: ffffc90000647ff0 RCX: 00007ff1c46876ed
[  385.698718] RDX: 0000000000000010 RSI: 00007fff13552fa0 RDI: 0000000000000005
[  385.698723] RBP: 000056063d300580 R08: 0000000000000000 R09: 0000000000000060
[  385.698729] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000046
[  385.698734] R13: 00007fff13552c6f R14: 00007ff1c6279d00 R15: 00007ff1c6279a40

Testcase: igt/perf_pmu
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122172621.16158-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

During selftesting intel_rotate_pages() is very, very verbose without
giving us any information. Suppress the noise.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122145646.1859-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

We may try to do a large kmalloc for the permutation array, falling back
to a smaller array/test if the first allocation fails. Since we are
intentionally trying a large allocation which may fail, pass __GFP_NOWARN.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103842Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122120600.27025-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

For clients like intel-gpu-overlay it is easier to read the
counters via the perf API than having to parse sysfs.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-9-tvrtko.ursulin@linux.intel.com

Will be used for exposing the PMU counters.

v2:
 * Move intel_runtime_pm_get/put to the callers. (Chris Wilson)
 * Restore full unit conversion precision.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-8-tvrtko.ursulin@linux.intel.com

For clients like intel-gpu-overlay it is easier to read the
count via the perf API than having to parse /proc.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-7-tvrtko.ursulin@linux.intel.com

We can use engine busy stats instead of the sampling timer for
better accuracy.

By doing this we replace the stohastic sampling with busyness
metric derived directly from engine activity. This is context
switch interrupt driven, so as accurate as we can get from
software tracking.

As a secondary benefit, we can also not run the sampling timer
in cases only busyness metric is enabled.

v2: Rebase.
v3:
 * Rebase, comments.
 * Leave engine busyness controls out of workers.
v4: Checkpatch cleanup.
v5: Added comment to pmu_needs_timer change.
v6:
 * Rebase.
 * Fix style of some comments. (Chris Wilson)
v7: Rebase and commit message update. (Chris Wilson)
v8: Add delayed stats disabling to improve accuracy in face of
    CPU hotplug events.
v9: Rebase.
v10: Rebase - i915_modparams.enable_execlists removal.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-6-tvrtko.ursulin@linux.intel.com

Track total time requests have been executing on the hardware.

We add new kernel API to allow software tracking of time GPU
engines are spending executing requests.

Both per-engine and global API is added with the latter also
being exported for use by external users.

v2:
 * Squashed with the internal API.
 * Dropped static key.
 * Made per-engine.
 * Store time in monotonic ktime.

v3: Moved stats clearing to disable.

v4:
 * Comments.
 * Don't export the API just yet.

v5: Whitespace cleanup.

v6:
 * Rename ref to active.
 * Drop engine aggregate stats for now.
 * Account initial busy period after enabling stats.

v7:
 * Rebase.

v8:
 * Move context in notification after the notifier. (Chris Wilson)

v9:

In cases where stats tracking is getting disabled while there is
an active context on an engine, add up the current value to the
total. This also implies we don't clear the total when tracking
is disabled any longer. There is no real need to do so because
we define the stats as relative while enabled, meaning
comparison between two samples while tracking is enabled is the
valid usage. However, when busy stats will later be plugged into
the perf PMU API, it is beneficial to not reset the total, since
the PMU core likes to do some counter disable/enable cycles on
startup, and while doing so during a single long context
executing on an engine we would lose some accuracy and so make
unit testing more difficult than needs to be.

v10:
 * Fix accounting for preemption.

v11:
 * Rebase for i915_modparams.enable_execlists removal.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-5-tvrtko.ursulin@linux.intel.com

No functional change just something which will be handy in the
following patch.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-4-tvrtko.ursulin@linux.intel.com

If only a subset of events is enabled we can afford to suspend
the sampling timer when the GPU is idle and so save some cycles
and power.

v2: Rebase and limit timer even more.
v3: Rebase.
v4: Rebase.
v5: Skip action if perf PMU failed to register.
v6: Checkpatch cleanup.
v7:
 * Add a common helper to start the timer if needed. (Chris Wilson)
 * Add comment explaining bitwise logic in pmu_needs_timer.
v8: Fix some comments styles. (Chris Wilson)
v9: Rebase.
v10: Move function declarations to i915_pmu.h.
v11: Rename functions to i915_pmu_gt_(un)parked. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-3-tvrtko.ursulin@linux.intel.com

From: Chris Wilson <chris@chris-wilson.co.uk>
From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>

The first goal is to be able to measure GPU (and invidual ring) busyness
without having to poll registers from userspace. (Which not only incurs
holding the forcewake lock indefinitely, perturbing the system, but also
runs the risk of hanging the machine.) As an alternative we can use the
perf event counter interface to sample the ring registers periodically
and send those results to userspace.

Functionality we are exporting to userspace is via the existing perf PMU
API and can be exercised via the existing tools. For example:

  perf stat -a -e i915/rcs0-busy/ -I 1000

Will print the render engine busynnes once per second. All the performance
counters can be enumerated (perf list) and have their unit of measure
correctly reported in sysfs.

v1-v2 (Chris Wilson):

v2: Use a common timer for the ring sampling.

v3: (Tvrtko Ursulin)
 * Decouple uAPI from i915 engine ids.
 * Complete uAPI defines.
 * Refactor some code to helpers for clarity.
 * Skip sampling disabled engines.
 * Expose counters in sysfs.
 * Pass in fake regs to avoid null ptr deref in perf core.
 * Convert to class/instance uAPI.
 * Use shared driver code for rc6 residency, power and frequency.

v4: (Dmitry Rogozhkin)
 * Register PMU with .task_ctx_nr=perf_invalid_context
 * Expose cpumask for the PMU with the single CPU in the mask
 * Properly support pmu->stop(): it should call pmu->read()
 * Properly support pmu->del(): it should call stop(event, PERF_EF_UPDATE)
 * Introduce refcounting of event subscriptions.
 * Make pmu.busy_stats a refcounter to avoid busy stats going away
   with some deleted event.
 * Expose cpumask for i915 PMU to avoid multiple events creation of
   the same type followed by counter aggregation by perf-stat.
 * Track CPUs getting online/offline to migrate perf context. If (likely)
   cpumask will initially set CPU0, CONFIG_BOOTPARAM_HOTPLUG_CPU0 will be
   needed to see effect of CPU status tracking.
 * End result is that only global events are supported and perf stat
   works correctly.
 * Deny perf driver level sampling - it is prohibited for uncore PMU.

v5: (Tvrtko Ursulin)

 * Don't hardcode number of engine samplers.
 * Rewrite event ref-counting for correctness and simplicity.
 * Store initial counter value when starting already enabled events
   to correctly report values to all listeners.
 * Fix RC6 residency readout.
 * Comments, GPL header.

v6:
 * Add missing entry to v4 changelog.
 * Fix accounting in CPU hotplug case by copying the approach from
   arch/x86/events/intel/cstate.c. (Dmitry Rogozhkin)

v7:
 * Log failure message only on failure.
 * Remove CPU hotplug notification state on unregister.

v8:
 * Fix error unwind on failed registration.
 * Checkpatch cleanup.

v9:
 * Drop the energy metric, it is available via intel_rapl_perf.
   (Ville Syrjälä)
 * Use HAS_RC6(p). (Chris Wilson)
 * Handle unsupported non-engine events. (Dmitry Rogozhkin)
 * Rebase for intel_rc6_residency_ns needing caller managed
   runtime pm.
 * Drop HAS_RC6 checks from the read callback since creating those
   events will be rejected at init time already.
 * Add counter units to sysfs so perf stat output is nicer.
 * Cleanup the attribute tables for brevity and readability.

v10:
 * Fixed queued accounting.

v11:
 * Move intel_engine_lookup_user to intel_engine_cs.c
 * Commit update. (Joonas Lahtinen)

v12:
 * More accurate sampling. (Chris Wilson)
 * Store and report frequency in MHz for better usability from
   perf stat.
 * Removed metrics: queued, interrupts, rc6 counters.
 * Sample engine busyness based on seqno difference only
   for less MMIO (and forcewake) on all platforms. (Chris Wilson)

v13:
 * Comment spelling, use mul_u32_u32 to work around potential GCC
   issue and somne code alignment changes. (Chris Wilson)

v14:
 * Rebase.

v15:
 * Rebase for RPS refactoring.

v16:
 * Use the dynamic slot in the CPU hotplug state machine so that we are
   free to setup our state as multi-instance. Previously we were re-using
   the CPUHP_AP_PERF_X86_UNCORE_ONLINE slot which is neither used as
   multi-instance, nor owned by our driver to start with.
 * Register the CPU hotplug handlers after the PMU, otherwise the callback
   will get called before the PMU is initialized which can end up in
   perf_pmu_migrate_context with an un-initialized base.
 * Added workaround for a probable bug in cpuhp core.

v17:
 * Remove workaround for the cpuhp bug.

v18:
 * Rebase for drm_i915_gem_engine_class getting upstream before us.

v19:
 * Rebase. (trivial)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-2-tvrtko.ursulin@linux.intel.com

Code to be shared between debugfs and the PMU implementation.

v2: Checkpatch cleanup.
v3: Also consolidate i915_sysfs.c/gt_act_freq_mhz_show.
v4: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-1-tvrtko.ursulin@linux.intel.com

Despite us reloading the module around every selftest, the lockclasses
persist and the chains used in selftesting may then dictate how we are
allowed to nest locks during runtime testing. As such we have to be just
as careful, and in particular it turns out we are not allowed to nest
dev->object_name_lock (drm_gem_handle_create) inside dev->struct_mutex.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103830Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121110652.1107-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Check that the planes are in the state we expect them to be. For
now we can only check whether each plane is correctly enabled or
disabled. In the future we may want to expand the plane state
readout to support a more thorough verification.

v2: Verify all planes part of the state as long as at least
    one crtc is doing a modeset (Daniel)
v3: Fix typoes (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-11-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Since we now have a ->get_hw_state() method for planes, let's use
that during the initial plane fb readout.

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-10-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Eliminate crtc->plane since it's pretty much a layering violation.
We can always get the plane via crtc->primary if we actually need it.

The only ugly thing left is plane_to_crtc_mapping[], but that's
still needed by the pre-g4x watermark code.

v2: Removed a misplaced comment change (Daniel)
v3: Rebase due to fbc crtc->y usage removal
v4: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-9-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Stop using the old for_each_intel_plane_in_state() type iteration
macro and replace it with for_each_new_intel_plane_in_state().
And similarly replace drm_atomic_get_existing_crtc_state() with
intel_atomic_get_new_crtc_state(). Switch over to intel_ types
as well to make the code less cluttered.

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-8-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The only relevant difference between i9xx_get_initial_plane_config() and
ironlake_get_initial_plane_config() is the HSW/BDW TILEOFF handling.
Add that to i9xx_get_initial_plane_config() and nuke
ironlake_get_initial_plane_config().

v2: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-7-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Use enum pipe, enum plane_id, and enum i9xx_plane_id consistently in the
initial framebuffe readout.

v2: Use old_plane_id in the ilk code
v3: s/old_plane_id/i9xx_plane_id/ (Daniel)
v4: Rebase due to GLK/CNL PLANE_COLOR_CTL alpha stuff
v5: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-6-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Replace the 0 and 1 with PLANE_A and PLANE_B in the pre-g4x wm code.

v2: s/old_plane_id/i9xx_plane_id/ (Daniel)
v3: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-5-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Rename enum plane to enum i9xx_plane_id to make it clear that it only
applies to pre-SKL platforms.

enum i9xx_plane_id is a global identifier, whereas enum plane_id is
per-pipe. We need the old global identifier to index the primary plane
(and the pre-g4x sprite C if we ever expose it) registers on pre-SKL
platforms.

v2: Reorder patches
v3: s/old_plane_id/i9xx_plane_id/ (Daniel)
    Pimp the commit message a bit
    Note that i9xx_plane_id doesn't apply to SKL+
v4: Rebase due to power domain handling in plane readout
v5: Rebase due to crtc->dspaddr_offset removal
v6: s/plane/i9xx_plane/ etc. (James)

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-4-ville.syrjala@linux.intel.comReviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Unify the plane disabling during state readout by pulling the code into
a new helper intel_plane_disable_noatomic(). We'll also read out the
state of all planes, so that we know which planes really need to be
diabled.

Additonally we change the plane<->pipe mapping sanitation to work by
simply disabling the offending planes instead of entire pipes. And
we do it before we otherwise sanitize the crtcs, which means we don't
have to worry about misassigned planes during crtc sanitation anymore.

v2: Reoder patches to not depend on enum old_plane_id
v3: s/for_each_pipe/for_each_intel_crtc/

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NThierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-3-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Add a .get_hw_state() method for planes, returning true or false
depending on whether the plane is enabled. Use it to rewrite the
plane enabled/disabled asserts in platform agnostic fashion.

We do lose the pre-gen4 plane<->pipe mapping checks, but since we're
supposed sanitize that anyway it doesn't really matter.

v2: Reoder patches to not depend on enum old_plane_id
    Just call assert_plane_disabled() from assert_planes_disabled()
v3: Deal with disabled power wells in .get_hw_state()
v4: Rebase due skl primary plane code removal

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

GEN6_RC_VIDEO_FREQ is deprecated for >= gen10;
don't try to program it.

v2: Use IS_GEN9() instead of INTEL_GEN() and remove comment (Rodrigo)
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117080146.20150-1-david.weinehall@linux.intel.com

Silence smatch over

drivers/gpu/drm/i915/selftests/intel_guc.c:135 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->execbuf_client' could be null (see line 123)
drivers/gpu/drm/i915/selftests/intel_guc.c:142 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->preempt_client' could be null (see line 123)

by asserting that we did succeed in creating the pair of clients for
testing.

References: 55bd6bd7 ("drm/i915/selftests: Add a GuC doorbells selftest")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120211907.1649-1-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>

Having disabled the broken semaphores on Sandybridge, there is no need
for a modparam any more, so remove it in favour of a simple
HAS_LEGACY_SEMAPHORES() guard.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk

As the semaphores is just part of the engine, include it with the
general pretty printer universally used for debugging.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-4-chris@chris-wilson.co.uk

I should have admitted defeat long ago as there has been a rare but
persistent error on Sandybridge where semaphore signaling did not
propagate to the waiter, leading to a GPU hang.

With the work on fence signaling for v4.9, the impact of using CPU driven
signaling was greatly reduced wrt to the latency of GPU semaphores,
though without logical rings support, the benefit of reordering work to
avoid bubbles is not realised (i.e. as it stands fence signaling is just
a slower, more costly version of HW semaphores; but works more
consistently). As a rough indicator of the difference,

with semaphores:
Sequential (3 engines, 1 processes): average 5.470us per cycle [expected 4.988us]
w/o semaphores:
Sequential (3 engines, 1 processes): average 15.771us per cycle [expected 4.923us]

In comparison, v3.4:
with semaphores:
Sequential (3 engines, 1 processes): average 16.066us per cycle [expected 11.842us]
w/o semaphores:
Sequential (3 engines, 1 processes): average 23.460us per cycle [expected 11.839us]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54226 #and 100+ dupes
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-3-chris@chris-wilson.co.uk

Since removing the module parameter to force selection of ringbuffer
emission for gen8, the code is defunct. Remove it.

To put the difference into perspective, a couple of microbenchmarks
(bdw i7-5557u, 20170324):
                                        ring          execlists
exec continuous nops on all rings:   1.491us            2.223us
exec sequential nops on each ring:  12.508us           53.682us
single nop + sync:                   9.272us           30.291us

vblank_mode=0 glxgears:            ~11000fps           ~9000fps

Since the earlier submission, gen8 ringbuffer submission has fallen
further and further behind in features. So while ringbuffer may hold the
throughput crown, in terms of interactive latency, execlists is much
better. Alas, we have no convenient metrics for such, other than
demonstrating things we can do with execlists but can not using
legacy ringbuffer submission.

We have made a few improvements to lowlevel execlists throughput,
and ringbuffer currently panics on boot! (bdw i7-5557u, 20171026):

                                        ring          execlists
exec continuous nops on all rings:       n/a            1.921us
exec sequential nops on each ring:       n/a           44.621us
single nop + sync:                       n/a           21.953us

vblank_mode=0 glxgears:                  n/a          ~18500fps

References: https://bugs.freedesktop.org/show_bug.cgi?id=87725Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Once-upon-a-time-Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-2-chris@chris-wilson.co.uk

Execlists and legacy ringbuffer submission are no longer feature
comparable (execlists now offer greater functionality that should
overcome their performance hit) and obsoletes the unsafe module
parameter, i.e. comparing the two modes of execution is no longer
useful, so remove the debug tool.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk

The hardware needs some time to process the information received in the
ExecList Submission Port, and expects us to not write anything more until
it has 'acknowledged' this new submission by sending an IDLE_ACTIVE or
PREEMPTED CSB event.

If we do not follow this, the driver could write new data into the ELSP
before HW had finishing fetching the previous one, putting us in
'undefined behaviour' space.

This seems to be the problem causing the spurious PREEMPTED & COMPLETE
events after a COMPLETE like the one below:

[] vcs0: sw rd pointer = 2, hw wr pointer = 0, current 'head' = 3.
[] vcs0:  Execlist CSB[0]: 0x00000018 _ 0x00000007
[] vcs0:  Execlist CSB[1]: 0x00000001 _ 0x00000000
[] vcs0:  Execlist CSB[2]: 0x00000018 _ 0x00000007  <<< COMPLETE
[] vcs0:  Execlist CSB[3]: 0x00000012 _ 0x00000007  <<< PREEMPTED & COMPLETE
[] vcs0:  Execlist CSB[4]: 0x00008002 _ 0x00000006
[] vcs0:  Execlist CSB[5]: 0x00000014 _ 0x00000006

The ELSP writes that lead to this CSB sequence show that the HW hadn't
started executing the previous execlist (the one with only ctx 0x6) by the
time the new one was submitted; this is a bit more clear in the data
show in the EXECLIST_STATUS register at the time of the ELSP write.

[] vcs0: ELSP[0] = 0x0_0        [execlist1] - status_reg = 0x0_302
[] vcs0: ELSP[1] = 0x6_fedb2119 [execlist0] - status_reg = 0x0_8302

[] vcs0: ELSP[2] = 0x7_fedaf119 [execlist1] - status_reg = 0x0_8308
[] vcs0: ELSP[3] = 0x6_fedb2119 [execlist0] - status_reg = 0x7_8308

Note that having to wait for this ack does not disable lite-restores,
although it may reduce their numbers.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102035Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/<20171118003038.7935-1-michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-4-chris@chris-wilson.co.ukReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Make the private array used for stashing test clients static, to silence
sparse.

References: 55bd6bd7 ("drm/i915/selftests: Add a GuC doorbells selftest")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120132606.4254-1-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>

Now that we have this stored in the device info, we can drop it from perf
part of the driver.

Note that this requires to init perf after we've computed the frequency,
hence why we move i915_perf_init() from i915_driver_init_early() to after
intel_device_info_runtime_init().

v2: Use div_u64 (Chris)

v3: Drop u64 divs by switching to kHz (Chris/Ville)
    Move i915_perf_fini to i915_driver_cleanup_hw (Matthew)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113181902.12411-2-lionel.g.landwerlin@intel.com

During request construction, after pinning the context we know whether
or not we have to emit a context switch. So move this common operation
from every caller into i915_gem_request_alloc() itself.

v2: Always submit the request if we emitted some commands during request
construction, as typically it also involves changes in global state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-2-chris@chris-wilson.co.uk

As the request will, in the following patch, implicitly invoke a
context-switch on construction, we should precede that with a GPU TLB
invalidation. Also, even before using GGTT, we always want to invalidate
the TLBs for any updates (as well as the ppgtt invalidates that are
unconditionally applied by execbuf). Since we almost always require the
TLB invalidate, do it unconditionally on request allocation and so we can
remove it from all other paths.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

This replaces accesses to the reg field of the i915_reg_t structure
with the i915_mmio_reg_offset() inline function.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NEwelina Musial <ewelina.musial@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-2-lionel.g.landwerlin@intel.com

If IDLE_ACTIVE is set, then all other bits are invalid. For us, we can
assert that if we see a COMPLETE | PREEMPTED event, then it should be
impossible for it to also contain an IDLE_ACTIVE flag.
Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-3-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Since we get a COMPLETE event when the context switch occurs on
RING_HEAD == RING_TAIL and a PREEMPTED event when a switch occurs
before that point, COMPLETE | PREEMPTED should cover all possible context
switch completion events. We can move the ELEMENT_SWITCH info message
from the COMPLETED_MASK into an assertion for when we are performing a
switch to port[1].
Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120123458.23242-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>