Documented the steps for sending break on sunhv console.
Signed-off-by: NVijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now we can also jump to boot prom from sunhv console by sending
break twice on console for both running and panicked kernel
cases.
Signed-off-by: NVijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On panic, all other CPUs are stopped except the one which had
hit panic. To keep console alive, we need to migrate hvcons irq
to panicked CPU.
Signed-off-by: NVijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CPU needs to be marked offline before stopping it. When not marked
offline, the xcall receives HV_EWOULDBLOCK and so assumes that not all
CPUs received the message, and retries. After 10000 retries, it finally
fails with fatal mondo timeout.
Signed-off-by: NVijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Physical sector size is supported in v1.2 of the vDisk protocol and
should be set if available.  If protocol version 1.2 is used and the
physical disk size is unavailable, then the disk is considered busy.
Signed-off-by: NLiam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When returning from the user probe code into userspace process, PC & NPC are
truncated to 32 bits.

Due to shared libraries getting loaded very high in the virtual address
space of
the process, placing a user probe inside a shared library makes the kernel
return into the process at the wrong address, causing it to seg'fault
most of
the time.

This patch prevents truncating PC and NPC.
Signed-off-by: NEric Saint Etienne <eric.saint.etienne@oracle.com>
Reviewed-by: NDavid Aldridge <david.j.aldridge@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently define macros referring to cpu_data if CONFIG_SMP is
defined, but only include the declaration if CONFIG_NUMA is defined.

Fixes: 541cc394 ("sparc: fix a building error reported by kbuild")
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Acked-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The objects viking_ops, viking_sun4d_smp_ops and smp_cachetlb_ops of
type sparc32_cachetlb_ops are not modified anywhere after getting modified
in the init functions. Inside init their reference is also stored in a
pointer of type const struct sparc32_cachetlb_ops *. So these structures
are never modified after init, therefore add __ro_after to the declaration
of these structures.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge updates from Andrew Morton:
 "142 patches:

   - DAX updates

   - various misc bits

   - OCFS2 updates

   - most of MM"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits)
  mm/z3fold.c: limit first_num to the actual range of possible buddy indexes
  mm: fix <linux/pagemap.h> stray kernel-doc notation
  zram: remove obsolete sysfs attrs
  mm/memblock.c: remove unnecessary log and clean up
  oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA
  mm: drop unused argument of zap_page_range()
  mm: drop zap_details::check_swap_entries
  mm: drop zap_details::ignore_dirty
  mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled
  mm: help __GFP_NOFAIL allocations which do not trigger OOM killer
  mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically
  mm: consolidate GFP_NOFAIL checks in the allocator slowpath
  lib/show_mem.c: teach show_mem to work with the given nodemask
  arch, mm: remove arch specific show_mem
  mm, page_alloc: warn_alloc print nodemask
  mm, page_alloc: do not report all nodes in show_mem
  Revert "mm: bail out in shrink_inactive_list()"
  mm, vmscan: consider eligible zones in get_scan_count
  mm, vmscan: cleanup lru size claculations
  mm, vmscan: do not count freed pages as PGDEACTIVATE
  ...

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...

Pull documentation updates from Jonathan Corbet:
 "A slightly quieter cycle for documentation this time around.

  Three more DocBook template files have been converted to RST; only 21
  to go. There are various build improvements and the usual array of
  documentation improvements and fixes"

* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
  docs / driver-api: Fix structure references in device_link.rst
  PM / docs: Fix structure references in device.rst
  Add a target to check broken external links in the Documentation
  Documentation: Fix linux-api list typo
  Documentation: DocBook/Makefile comment typo
  Improve sparse documentation
  Documentation: make Makefile.sphinx no-ops quieter
  Documentation: DMA-ISA-LPC.txt
  Documentation: input: fix path to input code definitions
  docs: Remove the copyright year from conf.py
  docs: Fix a warning in the Korean HOWTO.rst translation
  PM / sleep / docs: Convert PM notifiers document to reST
  PM / core / docs: Convert sleep states API document to reST
  PM / core: Update kerneldoc comments in pm.h
  doc-rst: Fix recursive make invocation from macros
  doc-rst: Delete output of failed dot-SVG conversion
  doc-rst: Break shell command sequences on failure
  Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
  doc-rst: fixed cleandoc target when used with O=dir
  Documentation/sphinx: prevent generation of .pyc files in the source tree
  ...

Pull KVM updates from Paolo Bonzini:
 "4.11 is going to be a relatively large release for KVM, with a little
  over 200 commits and noteworthy changes for most architectures.

  ARM:
   - GICv3 save/restore
   - cache flushing fixes
   - working MSI injection for GICv3 ITS
   - physical timer emulation

  MIPS:
   - various improvements under the hood
   - support for SMP guests
   - a large rewrite of MMU emulation. KVM MIPS can now use MMU
     notifiers to support copy-on-write, KSM, idle page tracking,
     swapping, ballooning and everything else. KVM_CAP_READONLY_MEM is
     also supported, so that writes to some memory regions can be
     treated as MMIO. The new MMU also paves the way for hardware
     virtualization support.

  PPC:
   - support for POWER9 using the radix-tree MMU for host and guest
   - resizable hashed page table
   - bugfixes.

  s390:
   - expose more features to the guest
   - more SIMD extensions
   - instruction execution protection
   - ESOP2

  x86:
   - improved hashing in the MMU
   - faster PageLRU tracking for Intel CPUs without EPT A/D bits
   - some refactoring of nested VMX entry/exit code, preparing for live
     migration support of nested hypervisors
   - expose yet another AVX512 CPUID bit
   - host-to-guest PTP support
   - refactoring of interrupt injection, with some optimizations thrown
     in and some duct tape removed.
   - remove lazy FPU handling
   - optimizations of user-mode exits
   - optimizations of vcpu_is_preempted() for KVM guests

  generic:
   - alternative signaling mechanism that doesn't pound on
     tsk->sighand->siglock"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (195 commits)
  x86/kvm: Provide optimized version of vcpu_is_preempted() for x86-64
  x86/paravirt: Change vcp_is_preempted() arg type to long
  KVM: VMX: use correct vmcs_read/write for guest segment selector/base
  x86/kvm/vmx: Defer TR reload after VM exit
  x86/asm/64: Drop __cacheline_aligned from struct x86_hw_tss
  x86/kvm/vmx: Simplify segment_base()
  x86/kvm/vmx: Get rid of segment_base() on 64-bit kernels
  x86/kvm/vmx: Don't fetch the TSS base from the GDT
  x86/asm: Define the kernel TSS limit in a macro
  kvm: fix page struct leak in handle_vmon
  KVM: PPC: Book3S HV: Disable HPT resizing on POWER9 for now
  KVM: Return an error code only as a constant in kvm_get_dirty_log()
  KVM: Return an error code only as a constant in kvm_get_dirty_log_protect()
  KVM: Return directly after a failed copy_from_user() in kvm_vm_compat_ioctl()
  KVM: x86: remove code for lazy FPU handling
  KVM: race-free exit from KVM_RUN without POSIX signals
  KVM: PPC: Book3S HV: Turn "KVM guest htab" message into a debug message
  KVM: PPC: Book3S PR: Ratelimit copy data failure error messages
  KVM: Support vCPU-based gfn->hva cache
  KVM: use separate generations for each address space
  ...

Pull IOMMU fix from Joerg Roedel:
 "Fix a boot crash caused by the VT-d driver when booted with IOMMU
  disabled. This was introduced with the recent IOMMU changes"

* tag 'iommu-fix-v4.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix crash on boot when DMAR is disabled

Pull seccomp fix from James Morris:
 "A fix for a regression in the seccomp code (it was supposed to be in
  the first pull req but I had it queued in the wrong branch)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  seccomp: Only dump core when single-threaded

Pull xfs updates from Darrick Wong:
 "Here are the XFS changes for 4.11. We aren't introducing any major
  features in this release cycle except for this being the first merge
  window I've managed on my own. :)

  Changes since last update:

   - Various cleanups

   - Livelock fixes for eofblocks scanning

   - Improved input verification for on-disk metadata

   - Fix races in the copy on write remap mechanism

   - Fix buffer io error timeout controls

   - Streamlining of directio copy on write

   - Asynchronous discard support

   - Fix asserts when splitting delalloc reservations

   - Don't bloat bmbt when right shifting extents

   - Inode alignment fixes for 32k block sizes"

* tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (39 commits)
  xfs: remove XFS_ALLOCTYPE_ANY_AG and XFS_ALLOCTYPE_START_AG
  xfs: simplify xfs_rtallocate_extent
  xfs: tune down agno asserts in the bmap code
  xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment
  xfs: don't reserve blocks for right shift transactions
  xfs: fix len comparison in xfs_extent_busy_trim
  xfs: fix uninitialized variable in _reflink_convert_cow
  xfs: split indlen reservations fairly when under reserved
  xfs: handle indlen shortage on delalloc extent merge
  xfs: resurrect debug mode drop buffered writes mechanism
  xfs: clear delalloc and cache on buffered write failure
  xfs: don't block the log commit handler for discards
  xfs: improve busy extent sorting
  xfs: improve handling of busy extents in the low-level allocator
  xfs: don't fail xfs_extent_busy allocation
  xfs: correct null checks and error processing in xfs_initialize_perag
  xfs: update ctime and mtime on clone destinatation inodes
  xfs: allocate direct I/O COW blocks in iomap_begin
  xfs: go straight to real allocations for direct I/O COW writes
  xfs: return the converted extent in __xfs_reflink_convert_cow
  ...

Pull printk updates from Petr Mladek:

 - Add Petr Mladek, Sergey Senozhatsky as printk maintainers, and Steven
   Rostedt as the printk reviewer. This idea came up after the
   discussion about printk issues at Kernel Summit. It was formulated
   and discussed at lkml[1].

 - Extend a lock-less NMI per-cpu buffers idea to handle recursive
   printk() calls by Sergey Senozhatsky[2]. It is the first step in
   sanitizing printk as discussed at Kernel Summit.

   The change allows to see messages that would normally get ignored or
   would cause a deadlock.

   Also it allows to enable lockdep in printk(). This already paid off.
   The testing in linux-next helped to discover two old problems that
   were hidden before[3][4].

 - Remove unused parameter by Sergey Senozhatsky. Clean up after a past
   change.

[1] http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
[2] http://lkml.kernel.org/r/20161227141611.940-1-sergey.senozhatsky@gmail.com
[3] http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
[4] http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: drop call_console_drivers() unused param
  printk: convert the rest to printk-safe
  printk: remove zap_locks() function
  printk: use printk_safe buffers in printk
  printk: report lost messages in printk safe/nmi contexts
  printk: always use deferred printk when flush printk_safe lines
  printk: introduce per-cpu safe_print seq buffer
  printk: rename nmi.c and exported api
  printk: use vprintk_func in vprintk()
  MAINTAINERS: Add printk maintainers

Pull modules updates from Jessica Yu:
 "Summary of modules changes for the 4.11 merge window:

   - A few small code cleanups

   - Add modules git tree url to MAINTAINERS"

* tag 'modules-for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  MAINTAINERS: add tree for modules
  module: fix memory leak on early load_module() failures
  module: Optimize search_module_extables()
  modules: mark __inittest/__exittest as __maybe_unused
  livepatch/module: print notice of TAINT_LIVEPATCH
  module: Drop redundant declaration of struct module

At present, Tying the first_num size to NCHUNKS_ORDER is confusing.  the
number of chunks is completely unrelated to the number of buddies.

The patch limits the first_num to actual range of possible buddy indexes.
and that is more reasonable and obvious without functional change.

Link: http://lkml.kernel.org/r/1476776569-29504-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhong jiang <zhongjiang@huawei.com>
Suggested-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete stray (second) function description in find_lock_page()
kernel-doc notation.

Note: scripts/kernel-doc just ignores the second function description.

Fixes: 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible")
Link: http://lkml.kernel.org/r/b037e9a3-516c-ec02-6c8e-fa5479747ba6@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We had a deprecated_attr_warn() warning for 2 years and now the time has
come and we finally can do the cleanup.

The plan was as follows:

: per-stat sysfs attributes are considered to be deprecated.
: The basic strategy is:
: -- the existing RW nodes will be downgraded to WO nodes (in linux 4.11)
: -- deprecated RO sysfs nodes will eventually be removed (in linux 4.11)
:
: The list of deprecated attributes can be found here:
: Documentation/ABI/obsolete/sysfs-block-zram
:
: Basically, every attribute that has its own read accessible sysfs
: node (e.g. num_reads) *AND* is accessible via one of the stat files
: (zram<id>/stat or zram<id>/io_stat or zram<id>/mm_stat) is considered
: to be deprecated.

The patch also removes `obsolete/sysfs-block-zram', clean ups
`testing/sysfs-block-zram' and tweaks zram.txt files.

Link: http://lkml.kernel.org/r/20170118035838.11090-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no variable named flags in memblock_add() and
memblock_reserve() so remove it from the log messages.

This patch also cleans up the type casting for phys_addr_t by using %pa
to print them.

Link: http://lkml.kernel.org/r/1484720165-25403-1-git-send-email-miles.chen@mediatek.comSigned-off-by: NMiles Chen <miles.chen@mediatek.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Logic on whether we can reap pages from the VMA should match what we
have in madvise_dontneed().  In particular, we should skip, VM_PFNMAP
VMAs, but we don't now.

Let's just extract condition on which we can shoot down pagesi from a
VMA with MADV_DONTNEED into separate function and use it in both places.

Link: http://lkml.kernel.org/r/20170118122429.43661-4-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's no users of zap_page_range() who wants non-NULL 'details'.
Let's drop it.

Link: http://lkml.kernel.org/r/20170118122429.43661-3-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

detail == NULL would give the same functionality as
.check_swap_entries==true.

Link: http://lkml.kernel.org/r/20170118122429.43661-2-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only user of ignore_dirty is oom-reaper.  But it doesn't really use
it.

ignore_dirty only has effect on file pages mapped with dirty pte.  But
oom-repear skips shared VMAs, so there's no way we can dirty file pte in
them.

Link: http://lkml.kernel.org/r/20170118122429.43661-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch "mm, page_alloc: warn_alloc print nodemask" implicitly sets
the allocation nodemask to cpuset_current_mems_allowed when there is no
effective mempolicy.  cpuset_current_mems_allowed is only effective when
cpusets are enabled, which is also printed by warn_alloc(), so setting
the nodemask to cpuset_current_mems_allowed is redundant and prevents
debugging issues where ac->nodemask is not set properly in the page
allocator.

This provides better debugging output since
cpuset_print_current_mems_allowed() is already provided.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701181347320.142399@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that __GFP_NOFAIL doesn't override decisions to skip the oom killer
we are left with requests which require to loop inside the allocator
without invoking the oom killer (e.g.  GFP_NOFS|__GFP_NOFAIL used by fs
code) and so they might, in very unlikely situations, loop for ever -
e.g.  other parallel request could starve them.

This patch tries to limit the likelihood of such a lockup by giving
these __GFP_NOFAIL requests a chance to move on by consuming a small
part of memory reserves.  We are using ALLOC_HARDER which should be
enough to prevent from the starvation by regular allocation requests,
yet it shouldn't consume enough from the reserves to disrupt high
priority requests (ALLOC_HIGH).

While we are at it, let's introduce a helper __alloc_pages_cpuset_fallback
which enforces the cpusets but allows to fallback to ignore them if the
first attempt fails.  __GFP_NOFAIL requests can be considered important
enough to allow cpuset runaway in order for the system to move on.  It
is highly unlikely that any of these will be GFP_USER anyway.

Link: http://lkml.kernel.org/r/20161220134904.21023-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__alloc_pages_may_oom makes sure to skip the OOM killer depending on the
allocation request.  This includes lowmem requests, costly high order
requests and others.  For a long time __GFP_NOFAIL acted as an override
for all those rules.  This is not documented and it can be quite
surprising as well.  E.g.  GFP_NOFS requests are not invoking the OOM
killer but GFP_NOFS|__GFP_NOFAIL does so if we try to convert some of
the existing open coded loops around allocator to nofail request (and we
have done that in the past) then such a change would have a non trivial
side effect which is far from obvious.  Note that the primary motivation
for skipping the OOM killer is to prevent from pre-mature invocation.

The exception has been added by commit 82553a93 ("oom: invoke oom
killer for __GFP_NOFAIL").  The changelog points out that the oom killer
has to be invoked otherwise the request would be looping for ever.  But
this argument is rather weak because the OOM killer doesn't really
guarantee a forward progress for those exceptional cases:

- it will hardly help to form costly order which in turn can result in
  the system panic because of no oom killable task in the end - I believe
  we certainly do not want to put the system down just because there is a
  nasty driver asking for order-9 page with GFP_NOFAIL not realizing all
  the consequences.  It is much better this request would loop for ever
  than the massive system disruption

- lowmem is also highly unlikely to be freed during OOM killer

- GFP_NOFS request could trigger while there is still a lot of memory
  pinned by filesystems.

This patch simply removes the __GFP_NOFAIL special case in order to have a
more clear semantic without surprising side effects.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NNils Holland <nholland@tisys.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo Handa has pointed out that commit 0a0337e0 ("mm, oom: rework
oom detection") has subtly changed semantic for costly high order
requests with __GFP_NOFAIL and withtout __GFP_REPEAT and those can fail
right now.  My code inspection didn't reveal any such users in the tree
but it is true that this might lead to unexpected allocation failures
and subsequent OOPs.

__alloc_pages_slowpath wrt.  GFP_NOFAIL is hard to follow currently.
There are few special cases but we are lacking a catch all place to be
sure we will not miss any case where the non failing allocation might
fail.  This patch reorganizes the code a bit and puts all those special
cases under nopage label which is the generic go-to-fail path.  Non
failing allocations are retried or those that cannot retry like
non-sleeping allocation go to the failure point directly.  This should
make the code flow much easier to follow and make it less error prone
for future changes.

While we are there we have to move the stall check up to catch
potentially looping non-failing allocations.

[akpm@linux-foundation.org: fix alloc_flags may-be-used-uninitalized]
Link: http://lkml.kernel.org/r/20161220134904.21023-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

show_mem() allows to filter out node specific data which is irrelevant
to the allocation request via SHOW_MEM_FILTER_NODES.  The filtering is
done in skip_free_areas_node which skips all nodes which are not in the
mems_allowed of the current process.  This works most of the time as
expected because the nodemask shouldn't be outside of the allocating
task but there are some exceptions.  E.g.  memory hotplug might want to
request allocations from outside of the allowed nodes (see
new_node_page).

Get rid of this hardcoded behavior and push the allocation mask down the
show_mem path and use it instead of cpuset_current_mems_allowed.  NULL
nodemask is interpreted as cpuset_current_mems_allowed.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a generic implementation for quite some time already.  If there
is any arch specific information to be printed then we should add a
callback called from the generic code rather than duplicate the whole
show_mem.

The current code has resulted in the code duplication and the output
divergence which is both confusing and adds maintainance costs.

Let's just get rid of this mess.

Link: http://lkml.kernel.org/r/20170117091543.25850-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [UniCore32]
Acked-by: Helge Deller <deller@gmx.de> [for parisc]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

warn_alloc is currently used for to report an allocation failure or an
allocation stall.  We print some details of the allocation request like
the gfp mask and the request order.  We do not print the allocation
nodemask which is important when debugging the reason for the allocation
failure as well.  We alreaddy print the nodemask in the OOM report.

Add nodemask to warn_alloc and print it in warn_alloc as well.

Link: http://lkml.kernel.org/r/20170117091543.25850-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "show_mem updates", v2.

This is a mixture of one bug fix (patch 1), an enhancement (patch 2) and
cleanups (the rest of the series).  First two patches should be really
straightforward.  Patch 3 removes some arch specific show_mem
implementations because I think they are quite outdated and do not
really serve any useful purpose anymore.  I think we should really
strive to have a consistent show_mem output regardless of the
architecture.  If some architecture is really special and wants to dump
something additional we should do that via an arch specific hook.

The last patch adds nodemask parameter so that we do not rely on the
hardcoded mems_allowed of the current task when doing the node
filtering.  I consider this more a cleanup than a fix because basically
all users use a nodemask which is a subset of mems_allowed.  There is
only one call path in the memory hotplug which doesn't comply with this
but that is hardly something to worry about.

This patch (of 4):

Commit 599d0c95 ("mm, vmscan: move LRU lists to node") has added per
numa node statistics to show_mem but it forgot to add
skip_free_areas_node to filter out nodes which are outside of the
allocating task numa policy.  Add this check to not pollute the output
with the pointless information.

Link: http://lkml.kernel.org/r/20170117091543.25850-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 91dcade4.

inactive_reclaimable_pages shouldn't be needed anymore since that
get_scan_count is aware of the eligble zones ("mm, vmscan: consider
eligible zones in get_scan_count").

Link: http://lkml.kernel.org/r/20170117103702.28542-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpchxg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_scan_count() considers the whole node LRU size when

 - doing SCAN_FILE due to many page cache inactive pages
 - calculating the number of pages to scan

In both cases this might lead to unexpected behavior especially on 32b
systems where we can expect lowmem memory pressure very often.

A large highmem zone can easily distort SCAN_FILE heuristic because
there might be only few file pages from the eligible zones on the node
lru and we would still enforce file lru scanning which can lead to
trashing while we could still scan anonymous pages.

The later use of lruvec_lru_size can be problematic as well.  Especially
when there are not many pages from the eligible zones.  We would have to
skip over many pages to find anything to reclaim but shrink_node_memcg
would only reduce the remaining number to scan by SWAP_CLUSTER_MAX at
maximum.  Therefore we can end up going over a large LRU many times
without actually having chance to reclaim much if anything at all.  The
closer we are out of memory on lowmem zone the worse the problem will
be.

Fix this by filtering out all the ineligible zones when calculating the
lru size for both paths and consider only sc->reclaim_idx zones.

The patch would need to be tweaked a bit to apply to 4.10 and older but
I will do that as soon as it hits the Linus tree in the next merge
window.

Link: http://lkml.kernel.org/r/20170117103702.28542-3-mhocko@kernel.org
Fixes: b2e18757 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Tested-by: NTrevor Cordes <trevor@tecnopolis.ca>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lruvec_lru_size returns the full size of the LRU list while we sometimes
need a value reduced only to eligible zones (e.g.  for lowmem requests).
inactive_list_is_low is one such user.  Later patches will add more of
them.  Add a new parameter to lruvec_lru_size and allow it filter out
zones which are not eligible for the given context.

Link: http://lkml.kernel.org/r/20170117103702.28542-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PGDEACTIVATE represents the number of pages moved from the active list
to the inactive list.  At least this sounds like the original motivation
of the counter.  move_active_pages_to_lru, however, counts pages which
got freed in the mean time as deactivated as well.  This is a very rare
event and counting them as deactivation in itself is not harmful but it
makes the code more convoluted than necessary - we have to count both
all pages and those which are freed which is a bit confusing.

After this patch the PGDEACTIVATE should have a slightly more clear
semantic and only count those pages which are moved from the active to
the inactive list which is a plus.

Link: http://lkml.kernel.org/r/20170112211221.17636-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Suggested-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Link: http://lkml.kernel.org/r/671275de093d93ddc7c6f77ddc0d357149691a39.1484306840.git.geliangtang@gmail.comSigned-off-by: NGeliang Tang <geliangtang@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no thp defrag option that currently allows MADV_HUGEPAGE
regions to do direct compaction and reclaim while all other thp
allocations simply trigger kswapd and kcompactd in the background and
fail immediately.

The "defer" setting simply triggers background reclaim and compaction
for all regions, regardless of MADV_HUGEPAGE, which makes it unusable
for our userspace where MADV_HUGEPAGE is being used to indicate the
application is willing to wait for work for thp memory to be available.

The "madvise" setting will do direct compaction and reclaim for these
MADV_HUGEPAGE regions, but does not trigger kswapd and kcompactd in the
background for anybody else.

For reasonable usage, there needs to be a mesh between the two options.
This patch introduces a fifth mode, "defer+madvise", that will do direct
reclaim and compaction for MADV_HUGEPAGE regions and trigger background
reclaim and compaction for everybody else so that hugepages may be
available in the near future.

A proposal to allow direct reclaim and compaction for MADV_HUGEPAGE
regions as part of the "defer" mode, making it a very powerful setting
and avoids breaking userspace, was offered:
     http://marc.info/?t=148236612700003
This additional mode is a compromise.

A second proposal to allow both "defer" and "madvise" to be selected at
the same time was also offered:
     http://marc.info/?t=148357345300001.
This is possible, but there was a concern that it might break existing
userspaces the parse the output of the defrag mode, so the fifth option
was introduced instead.

This patch also cleans up the helper function for storing to "enabled"
and "defrag" since the former supports three modes while the latter
supports five and triple_flag_store() was getting unnecessarily messy.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701101614330.41805@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because during swap off, a swap entry may have swap_map[] ==
SWAP_HAS_CACHE (for example, just allocated).  If we return NULL in
__read_swap_cache_async(), the swap off will abort.  So when swap slot
cache is disabled, (for swap off), we will wait for page to be put into
swap cache in such race condition.  This should not be a problem for swap
slot cache, because swap slot cache should be drained after clearing
swap_slot_cache_enabled.

[ying.huang@intel.com: fix memory leak in __read_swap_cache_async()]
  Link: http://lkml.kernel.org/r/874lzt6znd.fsf@yhuang-dev.intel.com
Link: http://lkml.kernel.org/r/5e2c5f6abe8e6eb0797408897b1bba80938e9b9d.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>