Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...

Documentation/devicetree/bindings/bus/qcom,ebi2.txt

@@ -51,7 +51,7 @@ Required properties:
 - compatible: should be one of:
   "qcom,msm8660-ebi2"
   "qcom,apq8060-ebi2"
-- #address-cells: shoule be <2>: the first cell is the chipselect,
+- #address-cells: should be <2>: the first cell is the chipselect,
   the second cell is the offset inside the memory range
 - #size-cells: should be <1>
 - ranges: should be set to:
@@ -64,7 +64,7 @@ Required properties:
 - reg: two ranges of registers: EBI2 config and XMEM config areas
 - reg-names: should be "ebi2", "xmem"
 - clocks: two clocks, EBI_2X and EBI
-- clock-names: shoule be "ebi2x", "ebi2"
+- clock-names: should be "ebi2x", "ebi2"
 
 Optional subnodes:
 - Nodes inside the EBI2 will be considered device nodes.
@@ -100,7 +100,7 @@ Optional properties arrays for FAST chip selects:
   assertion, with respect to the cycle where ADV (address valid) is asserted.
   2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
 - qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
-  read transfer. For a single read trandfer this will be the time from CS
+  read transfer. For a single read transfer this will be the time from CS
   assertion to OE assertion. Valid values 0 thru 15.
 
 

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

@@ -117,7 +117,7 @@ ID	Clock	Peripheral
 25	tdm	Time Division Mplx
 28	xor1	XOR DMA 1
 29	sata1lnk
-30	sata1	SATA Host 0
+30	sata1	SATA Host 1
 
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral

Documentation/devicetree/bindings/display/arm,pl11x.txt

@@ -22,7 +22,7 @@ Required properties:
 
 - clocks: contains phandle and clock specifier pairs for the entries
 	in the clock-names property. See
-	Documentation/devicetree/binding/clock/clock-bindings.txt
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Optional properties:
 

Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

@@ -33,7 +33,7 @@ Optional properties for dp-controller:
 		in Documentation/devicetree/bindings/media/video-interfaces.txt,
 		please refer to the SoC specific binding document:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------

Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/display/display-timing.txt.
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/display-timing.txt
+	Documentation/devicetree/bindings/display/panel/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value

Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -64,7 +64,7 @@ Required properties:
 Optional properties (required if display-timings are used):
  - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/display-timing.txt.
+   Documentation/devicetree/bindings/display/panel/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.

Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt

@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
 - larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -108,7 +108,7 @@ Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
   regulator is wanted.
 
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/graph.txt
 [3] Documentation/devicetree/bindings/media/video-interfaces.txt
 [4] Documentation/devicetree/bindings/display/panel/

Documentation/devicetree/bindings/display/msm/edp.txt

@@ -10,7 +10,7 @@ Required properties:
 - interrupts: The interrupt signal from the eDP block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
   * "core_clk"
   * "iface_clk"

Documentation/devicetree/bindings/display/msm/hdmi.txt

@@ -49,7 +49,7 @@ Required properties:
     * "hdmi_tx_l4"
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - core-vdda-supply: phandle to vdda regulator device node
 
 Example:

Documentation/devicetree/bindings/display/panel/panel-dpi.txt

@@ -12,7 +12,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/display/display-timing.txt)
+  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
 - Video port for DPI input
 
 Example

Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt

@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 

Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt

@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt

@@ -35,7 +35,7 @@ Optional property for different chips:
 	       Required elements: "grf"
 
 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)

Documentation/devicetree/bindings/display/tilcdc/panel.txt

@@ -15,7 +15,7 @@ Required properties:
  - display-timings: typical videomode of lcd panel.  Multiple video modes
    can be listed if the panel supports multiple timings, but the 'native-mode'
    should be the preferred/default resolution.  Refer to
-   Documentation/devicetree/bindings/display/display-timing.txt for display
+   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
    timing binding details.
 
 Optional properties:

Documentation/devicetree/bindings/iommu/arm,smmu.txt

@@ -36,15 +36,15 @@ conditions.
                   combined interrupt, it must be listed multiple times.
 
 - #iommu-cells  : See Documentation/devicetree/bindings/iommu/iommu.txt
-                  for details. With a value of 1, each "iommus" entry
+                  for details. With a value of 1, each IOMMU specifier
                   represents a distinct stream ID emitted by that device
                   into the relevant SMMU.
 
                   SMMUs with stream matching support and complex masters
-                  may use a value of 2, where the second cell represents
-                  an SMR mask to combine with the ID in the first cell.
-                  Care must be taken to ensure the set of matched IDs
-                  does not result in conflicts.
+                  may use a value of 2, where the second cell of the
+                  IOMMU specifier represents an SMR mask to combine with
+                  the ID in the first cell.  Care must be taken to ensure
+                  the set of matched IDs does not result in conflicts.
 
 ** System MMU optional properties:
 

Documentation/devicetree/bindings/mfd/as3722.txt

@@ -122,8 +122,7 @@ Following are properties of regulator subnode.
 
 Power-off:
 =========
-AS3722 supports the system power off by turning off all its rail. This
-is provided through pm_power_off.
+AS3722 supports the system power off by turning off all its rails.
 The device node should have the following properties to enable this
 functionality
 ams,system-power-controller: Boolean, to enable the power off functionality

Documentation/devicetree/bindings/mfd/omap-usb-host.txt

@@ -64,8 +64,8 @@ Required properties if child node exists:
 Properties for children:
 
 The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
-See Documentation/devicetree/bindings/usb/omap-ehci.txt and
-omap3-ohci.txt
+See Documentation/devicetree/bindings/usb/ehci-omap.txt and
+Documentation/devicetree/bindings/usb/ohci-omap3.txt.
 
 Example for OMAP4:
 

Documentation/devicetree/bindings/net/marvell-pp2.txt

@@ -27,9 +27,7 @@ Optional properties (port):
 
 - marvell,loopback: port is loopback mode
 - phy: a phandle to a phy node defining the PHY address (as the reg
-  property, a single integer). Note: if this property isn't present,
-  then fixed link is assumed, and the 'fixed-link' property is
-  mandatory.
+  property, a single integer).
 
 Example:
 

Documentation/devicetree/bindings/pci/pci-iommu.txt

@@ -32,17 +32,17 @@ PCI root complex
 Optional properties
 -------------------
 
-- iommu-map: Maps a Requester ID to an IOMMU and associated iommu-specifier
+- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
   data.
 
   The property is an arbitrary number of tuples of
   (rid-base,iommu,iommu-base,length).
 
   Any RID r in the interval [rid-base, rid-base + length) is associated with
-  the listed IOMMU, with the iommu-specifier (r - rid-base + iommu-base).
+  the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
 
 - iommu-map-mask: A mask to be applied to each Requester ID prior to being
-  mapped to an iommu-specifier per the iommu-map property.
+  mapped to an IOMMU specifier per the iommu-map property.
 
 
 Example (1)

Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt

@@ -2,12 +2,12 @@ Driver a GPIO line that can be used to turn the power off.
 
 The driver supports both level triggered and edge triggered power off.
 At driver load time, the driver will request the given gpio line and
-install a pm_power_off handler. If the optional properties 'input' is
-not found, the GPIO line will be driven in the inactive
+install a handler to power off the system. If the optional properties
+'input' is not found, the GPIO line will be driven in the inactive
 state. Otherwise its configured as an input.
 
-When the pm_power_off is called, the gpio is configured as an output,
-and drive active, so triggering a level triggered power off
+When the power-off handler is called, the gpio is configured as an
+output, and drive active, so triggering a level triggered power off
 condition. This will also cause an inactive->active edge condition, so
 triggering positive edge triggered power off. After a delay of 100ms,
 the GPIO is set to inactive, thus causing an active->inactive edge,
@@ -24,7 +24,7 @@ Required properties:
 
 Optional properties:
 - input : Initially configure the GPIO line as an input. Only reconfigure
-  it to an output when the pm_power_off function is called. If this optional
+  it to an output when the power-off handler is called. If this optional
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 

Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt

@@ -3,8 +3,7 @@
 QNAP NAS devices have a microcontroller controlling the main power
 supply. This microcontroller is connected to UART1 of the Kirkwood and
 Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
-microcontroller to turn the power off. This driver adds a handler to
-pm_power_off which is called to turn the power off.
+microcontroller to turn the power off.
 
 Synology NAS devices use a similar scheme, but a different baud rate,
 9600, and a different character, '1'.

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -6,11 +6,13 @@ Required properties:
 - interrupts : Should contain uart interrupt
 
 Optional properties:
-- uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
                   in DCE mode by default.
 
+Please check Documentation/devicetree/bindings/serial/serial.txt
+for the complete list of generic properties.
+
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.
 

Documentation/devicetree/bindings/soc/fsl/qman-portals.txt

@@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
 CONTENTS
 
 	- QMan Portal
-	- QMan Pool Channel
 	- Example
 
 QMan Portal Node
@@ -82,25 +81,6 @@ These subnodes should have the following properties:
 	Definition:	The phandle to the particular hardware device that this
 			portal is connected to.
 
-DPAA QMan Pool Channel Nodes
-
-Pool Channels are defined with the following properties.
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-pool-channel"
-			May include "fsl,<SoC>-qman-pool-channel"
-
-- fsl,qman-channel-id
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
 EXAMPLE
 
 The example below shows a (P4080) QMan portals container/bus node with two portals

Documentation/devicetree/bindings/usb/ehci-omap.txt

@@ -29,4 +29,3 @@ usbhsehci: ehci@4a064c00 {
 &usbhsehci {
 	phys = <&hsusb1_phy 0 &hsusb3_phy>;
 };
-

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -104,11 +104,13 @@ everest	Everest Semiconductor Co. Ltd.
 everspin	Everspin Technologies, Inc.
 excito	Excito
 ezchip	EZchip Semiconductor
+faraday	Faraday Technology Corporation
 fcs	Fairchild Semiconductor
 firefly	Firefly
 focaltech	FocalTech Systems Co.,Ltd
 friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
 fsl	Freescale Semiconductor
+fujitsu	Fujitsu Ltd.
 ge	General Electric Company
 geekbuying	GeekBuying
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

drivers/of/base.c

@@ -843,8 +843,11 @@ struct device_node *of_find_node_opts_by_path(const char *path, const char **opt
 	if (!np)
 		np = of_node_get(of_root);
 	while (np && *path == '/') {
+		struct device_node *tmp = np;
+
 		path++; /* Increment past '/' delimiter */
 		np = __of_find_node_by_path(np, path);
+		of_node_put(tmp);
 		path = strchrnul(path, '/');
 		if (separator && separator < path)
 			break;
@@ -2495,3 +2498,40 @@ struct device_node *of_graph_get_remote_port(const struct device_node *node)
 	return of_get_next_parent(np);
 }
 EXPORT_SYMBOL(of_graph_get_remote_port);
+
+/**
+ * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
+ * @node: pointer to parent device_node containing graph port/endpoint
+ * @port: identifier (value of reg property) of the parent port node
+ * @endpoint: identifier (value of reg property) of the endpoint node
+ *
+ * Return: Remote device node associated with remote endpoint node linked
+ *	   to @node. Use of_node_put() on it when done.
+ */
+struct device_node *of_graph_get_remote_node(const struct device_node *node,
+					     u32 port, u32 endpoint)
+{
+	struct device_node *endpoint_node, *remote;
+
+	endpoint_node = of_graph_get_endpoint_by_regs(node, port, endpoint);
+	if (!endpoint_node) {
+		pr_debug("no valid endpoint (%d, %d) for node %s\n",
+			 port, endpoint, node->full_name);
+		return NULL;
+	}
+
+	remote = of_graph_get_remote_port_parent(endpoint_node);
+	of_node_put(endpoint_node);
+	if (!remote) {
+		pr_debug("no valid remote node\n");
+		return NULL;
+	}
+
+	if (!of_device_is_available(remote)) {
+		pr_debug("not available for remote node\n");
+		return NULL;
+	}
+
+	return remote;
+}
+EXPORT_SYMBOL(of_graph_get_remote_node);

drivers/of/fdt.c

@@ -9,7 +9,7 @@
  * version 2 as published by the Free Software Foundation.
  */
 
-#define pr_fmt(fmt)	"OF: fdt:" fmt
+#define pr_fmt(fmt)	"OF: fdt: " fmt
 
 #include <linux/crc32.h>
 #include <linux/kernel.h>

drivers/of/irq.c

@@ -104,7 +104,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 	const __be32 *match_array = initial_match_array;
 	const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = ~0 };
 	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
-	int imaplen, match, i;
+	int imaplen, match, i, rc = -EINVAL;
 
 #ifdef DEBUG
 	of_print_phandle_args("of_irq_parse_raw: ", out_irq);
@@ -134,7 +134,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 	pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize);
 
 	if (out_irq->args_count != intsize)
-		return -EINVAL;
+		goto fail;
 
 	/* Look for this #address-cells. We have to implement the old linux
 	 * trick of looking for the parent here as some device-trees rely on it
@@ -153,8 +153,10 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 	pr_debug(" -> addrsize=%d\n", addrsize);
 
 	/* Range check so that the temporary buffer doesn't overflow */
-	if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS))
+	if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS)) {
+		rc = -EFAULT;
 		goto fail;
+	}
 
 	/* Precalculate the match array - this simplifies match loop */
 	for (i = 0; i < addrsize; i++)
@@ -240,10 +242,11 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 			    newintsize, newaddrsize);
 
 			/* Check for malformed properties */
-			if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS))
-				goto fail;
-			if (imaplen < (newaddrsize + newintsize))
+			if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS)
+			    || (imaplen < (newaddrsize + newintsize))) {
+				rc = -EFAULT;
 				goto fail;
+			}
 
 			imap += newaddrsize + newintsize;
 			imaplen -= newaddrsize + newintsize;
@@ -271,11 +274,13 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 		ipar = newpar;
 		newpar = NULL;
 	}
+	rc = -ENOENT; /* No interrupt-map found */
+
  fail:
 	of_node_put(ipar);
 	of_node_put(newpar);
 
-	return -EINVAL;
+	return rc;
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_raw);
 

drivers/of/of_pci_irq.c

@@ -93,7 +93,15 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 		goto err;
 	return 0;
 err:
-	dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc);
+	if (rc == -ENOENT) {
+		dev_warn(&pdev->dev,
+			"%s: no interrupt-map found, INTx interrupts not available\n",
+			__func__);
+		pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n",
+			__func__);
+	} else {
+		dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc);
+	}
 	return rc;
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_pci);

drivers/of/of_reserved_mem.c

@@ -354,6 +354,10 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
 		mutex_lock(&of_rmem_assigned_device_mutex);
 		list_add(&rd->list, &of_rmem_assigned_device_list);
 		mutex_unlock(&of_rmem_assigned_device_mutex);
+		/* ensure that dma_ops is set for virtual devices
+		 * using reserved memory
+		 */
+		of_dma_configure(dev, np);
 
 		dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
 	} else {

drivers/of/overlay.c

@@ -18,7 +18,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/errno.h>
-#include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/idr.h>
@@ -314,7 +313,6 @@ static int of_build_overlay_info(struct of_overlay *ov,
 
 	cnt = 0;
 	for_each_child_of_node(tree, node) {
-		memset(&ovinfo[cnt], 0, sizeof(*ovinfo));
 		err = of_fill_overlay_info(ov, node, &ovinfo[cnt]);
 		if (err == 0)
 			cnt++;

drivers/of/platform.c

@@ -76,7 +76,7 @@ EXPORT_SYMBOL(of_find_device_by_node);
  * derive a unique name. If it cannot, then it will prepend names from
  * parent nodes until a unique name can be derived.
  */
-void of_device_make_bus_id(struct device *dev)
+static void of_device_make_bus_id(struct device *dev)
 {
 	struct device_node *node = dev->of_node;
 	const __be32 *reg;

drivers/of/resolver.c

@@ -18,7 +18,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/errno.h>
-#include <linux/string.h>
 #include <linux/slab.h>
 
 /* illegal phandle value (set when unresolved) */

drivers/of/unittest.c

@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/of_platform.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
@@ -1181,7 +1180,7 @@ static void of_unittest_destroy_tracked_overlays(void)
 	} while (defers > 0);
 }
 
-static int of_unittest_apply_overlay(int unittest_nr, int overlay_nr,
+static int of_unittest_apply_overlay(int overlay_nr, int unittest_nr,
 		int *overlay_id)
 {
 	struct device_node *np = NULL;
@@ -1840,7 +1839,7 @@ static void of_unittest_overlay_i2c_15(void)
 	int ret;
 
 	/* device should enable */
-	ret = of_unittest_apply_overlay_check(16, 15, 0, 1, I2C_OVERLAY);
+	ret = of_unittest_apply_overlay_check(15, 15, 0, 1, I2C_OVERLAY);
 	if (ret != 0)
 		return;
 

include/linux/of_device.h

@@ -13,7 +13,6 @@ struct device;
 #ifdef CONFIG_OF
 extern const struct of_device_id *of_match_device(
 	const struct of_device_id *matches, const struct device *dev);
-extern void of_device_make_bus_id(struct device *dev);
 
 /**
  * of_driver_match_device - Tell if a driver's of_match_table matches a device.

include/linux/of_graph.h

@@ -51,6 +51,8 @@ struct device_node *of_graph_get_endpoint_by_regs(
 struct device_node *of_graph_get_remote_port_parent(
 					const struct device_node *node);
 struct device_node *of_graph_get_remote_port(const struct device_node *node);
+struct device_node *of_graph_get_remote_node(const struct device_node *node,
+					     u32 port, u32 endpoint);
 #else
 
 static inline int of_graph_parse_endpoint(const struct device_node *node,
@@ -89,6 +91,12 @@ static inline struct device_node *of_graph_get_remote_port(
 {
 	return NULL;
 }
+static inline struct device_node *of_graph_get_remote_node(
+					const struct device_node *node,
+					u32 port, u32 endpoint)
+{
+	return NULL;
+}
 
 #endif /* CONFIG_OF */
 

scripts/dtc/dtc-lexer.l

@@ -121,6 +121,11 @@ static void lexical_error(const char *fmt, ...);
 			return DT_V1;
 		}
 
+<*>"/plugin/"	{
+			DPRINT("Keyword: /plugin/\n");
+			return DT_PLUGIN;
+		}
+
 <*>"/memreserve/"	{
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
@@ -184,16 +189,16 @@ static void lexical_error(const char *fmt, ...);
 			if (d.len == 1) {
 				lexical_error("Empty character literal");
 				yylval.integer = 0;
-				return DT_CHAR_LITERAL;
-			}
+			} else {
+				yylval.integer = (unsigned char)d.val[0];
 
-			yylval.integer = (unsigned char)d.val[0];
-
-			if (d.len > 2)
-				lexical_error("Character literal has %d"
-					      " characters instead of 1",
-					      d.len - 1);
+				if (d.len > 2)
+					lexical_error("Character literal has %d"
+						      " characters instead of 1",
+						      d.len - 1);
+			}
 
+			data_free(d);
 			return DT_CHAR_LITERAL;
 		}
 

scripts/dtc/dtc-parser.tab.h_shipped

-/* A Bison parser, made by GNU Bison 3.0.2.  */
+/* A Bison parser, made by GNU Bison 3.0.4.  */
 
 /* Bison interface for Yacc-like parsers in C
 
-   Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc.
+   Copyright (C) 1984, 1989-1990, 2000-2015 Free Software Foundation, Inc.
 
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -46,35 +46,36 @@ extern int yydebug;
   enum yytokentype
   {
     DT_V1 = 258,
-    DT_MEMRESERVE = 259,
-    DT_LSHIFT = 260,
-    DT_RSHIFT = 261,
-    DT_LE = 262,
-    DT_GE = 263,
-    DT_EQ = 264,
-    DT_NE = 265,
-    DT_AND = 266,
-    DT_OR = 267,
-    DT_BITS = 268,
-    DT_DEL_PROP = 269,
-    DT_DEL_NODE = 270,
-    DT_PROPNODENAME = 271,
-    DT_LITERAL = 272,
-    DT_CHAR_LITERAL = 273,
-    DT_BYTE = 274,
-    DT_STRING = 275,
-    DT_LABEL = 276,
-    DT_REF = 277,
-    DT_INCBIN = 278
+    DT_PLUGIN = 259,
+    DT_MEMRESERVE = 260,
+    DT_LSHIFT = 261,
+    DT_RSHIFT = 262,
+    DT_LE = 263,
+    DT_GE = 264,
+    DT_EQ = 265,
+    DT_NE = 266,
+    DT_AND = 267,
+    DT_OR = 268,
+    DT_BITS = 269,
+    DT_DEL_PROP = 270,
+    DT_DEL_NODE = 271,
+    DT_PROPNODENAME = 272,
+    DT_LITERAL = 273,
+    DT_CHAR_LITERAL = 274,
+    DT_BYTE = 275,
+    DT_STRING = 276,
+    DT_LABEL = 277,
+    DT_REF = 278,
+    DT_INCBIN = 279
   };
 #endif
 
 /* Value type.  */
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE YYSTYPE;
+
 union YYSTYPE
 {
-#line 38 "dtc-parser.y" /* yacc.c:1909  */
+#line 39 "dtc-parser.y" /* yacc.c:1909  */
 
 	char *propnodename;
 	char *labelref;
@@ -92,9 +93,12 @@ union YYSTYPE
 	struct node *nodelist;
 	struct reserve_info *re;
 	uint64_t integer;
+	unsigned int flags;
 
-#line 97 "dtc-parser.tab.h" /* yacc.c:1909  */
+#line 99 "dtc-parser.tab.h" /* yacc.c:1909  */
 };
+
+typedef union YYSTYPE YYSTYPE;
 # define YYSTYPE_IS_TRIVIAL 1
 # define YYSTYPE_IS_DECLARED 1
 #endif

scripts/dtc/dtc-parser.y

@@ -19,6 +19,7 @@
  */
 %{
 #include <stdio.h>
+#include <inttypes.h>
 
 #include "dtc.h"
 #include "srcpos.h"
@@ -31,7 +32,7 @@ extern void yyerror(char const *s);
 		treesource_error = true; \
 	} while (0)
 
-extern struct boot_info *the_boot_info;
+extern struct dt_info *parser_output;
 extern bool treesource_error;
 %}
 
@@ -52,9 +53,11 @@ extern bool treesource_error;
 	struct node *nodelist;
 	struct reserve_info *re;
 	uint64_t integer;
+	unsigned int flags;
 }
 
 %token DT_V1
+%token DT_PLUGIN
 %token DT_MEMRESERVE
 %token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR
 %token DT_BITS
@@ -71,6 +74,8 @@ extern bool treesource_error;
 
 %type <data> propdata
 %type <data> propdataprefix
+%type <flags> header
+%type <flags> headers
 %type <re> memreserve
 %type <re> memreserves
 %type <array> arrayprefix
@@ -101,10 +106,31 @@ extern bool treesource_error;
 %%
 
 sourcefile:
-	  DT_V1 ';' memreserves devicetree
+	  headers memreserves devicetree
 		{
-			the_boot_info = build_boot_info($3, $4,
-							guess_boot_cpuid($4));
+			parser_output = build_dt_info($1, $2, $3,
+			                              guess_boot_cpuid($3));
+		}
+	;
+
+header:
+	  DT_V1 ';'
+		{
+			$$ = DTSF_V1;
+		}
+	| DT_V1 ';' DT_PLUGIN ';'
+		{
+			$$ = DTSF_V1 | DTSF_PLUGIN;
+		}
+	;
+
+headers:
+	  header
+	| header headers
+		{
+			if ($2 != $1)
+				ERROR(&@2, "Header flags don't match earlier ones");
+			$$ = $1;
 		}
 	;
 

scripts/dtc/dtc.c

@@ -30,7 +30,16 @@ int quiet;		/* Level of quietness */
 int reservenum;		/* Number of memory reservation slots */
 int minsize;		/* Minimum blob size */
 int padsize;		/* Additional padding to blob */
+int alignsize;		/* Additional padding to blob accroding to the alignsize */
 int phandle_format = PHANDLE_BOTH;	/* Use linux,phandle or phandle properties */
+int generate_symbols;	/* enable symbols & fixup support */
+int generate_fixups;		/* suppress generation of fixups on symbol support */
+int auto_label_aliases;		/* auto generate labels -> aliases */
+
+static int is_power_of_2(int x)
+{
+	return (x > 0) && ((x & (x - 1)) == 0);
+}
 
 static void fill_fullpaths(struct node *tree, const char *prefix)
 {
@@ -53,7 +62,7 @@ static void fill_fullpaths(struct node *tree, const char *prefix)
 #define FDT_VERSION(version)	_FDT_VERSION(version)
 #define _FDT_VERSION(version)	#version
 static const char usage_synopsis[] = "dtc [options] <input file>";
-static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:hv";
+static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:a:fb:i:H:sW:E:@Ahv";
 static struct option const usage_long_opts[] = {
 	{"quiet",            no_argument, NULL, 'q'},
 	{"in-format",         a_argument, NULL, 'I'},
@@ -64,6 +73,7 @@ static struct option const usage_long_opts[] = {
 	{"reserve",           a_argument, NULL, 'R'},
 	{"space",             a_argument, NULL, 'S'},
 	{"pad",               a_argument, NULL, 'p'},
+	{"align",             a_argument, NULL, 'a'},
 	{"boot-cpu",          a_argument, NULL, 'b'},
 	{"force",            no_argument, NULL, 'f'},
 	{"include",           a_argument, NULL, 'i'},
@@ -71,6 +81,8 @@ static struct option const usage_long_opts[] = {
 	{"phandle",           a_argument, NULL, 'H'},
 	{"warning",           a_argument, NULL, 'W'},
 	{"error",             a_argument, NULL, 'E'},
+	{"symbols",	     no_argument, NULL, '@'},
+	{"auto-alias",       no_argument, NULL, 'A'},
 	{"help",             no_argument, NULL, 'h'},
 	{"version",          no_argument, NULL, 'v'},
 	{NULL,               no_argument, NULL, 0x0},
@@ -91,6 +103,7 @@ static const char * const usage_opts_help[] = {
 	"\n\tMake space for <number> reserve map entries (for dtb and asm output)",
 	"\n\tMake the blob at least <bytes> long (extra space)",
 	"\n\tAdd padding to the blob of <bytes> long (extra space)",
+	"\n\tMake the blob align to the <bytes> (extra space)",
 	"\n\tSet the physical boot cpu",
 	"\n\tTry to produce output even if the input tree has errors",
 	"\n\tAdd a path to search for include files",
@@ -101,6 +114,8 @@ static const char * const usage_opts_help[] = {
 	 "\t\tboth   - Both \"linux,phandle\" and \"phandle\" properties",
 	"\n\tEnable/disable warnings (prefix with \"no-\")",
 	"\n\tEnable/disable errors (prefix with \"no-\")",
+	"\n\tEnable generation of symbols",
+	"\n\tEnable auto-alias of labels",
 	"\n\tPrint this help and exit",
 	"\n\tPrint version and exit",
 	NULL,
@@ -153,7 +168,7 @@ static const char *guess_input_format(const char *fname, const char *fallback)
 
 int main(int argc, char *argv[])
 {
-	struct boot_info *bi;
+	struct dt_info *dti;
 	const char *inform = NULL;
 	const char *outform = NULL;
 	const char *outname = "-";
@@ -169,6 +184,7 @@ int main(int argc, char *argv[])
 	reservenum = 0;
 	minsize    = 0;
 	padsize    = 0;
+	alignsize  = 0;
 
 	while ((opt = util_getopt_long()) != EOF) {
 		switch (opt) {
@@ -196,6 +212,12 @@ int main(int argc, char *argv[])
 		case 'p':
 			padsize = strtol(optarg, NULL, 0);
 			break;
+		case 'a':
+			alignsize = strtol(optarg, NULL, 0);
+			if (!is_power_of_2(alignsize))
+				die("Invalid argument \"%d\" to -a option\n",
+				    optarg);
+			break;
 		case 'f':
 			force = true;
 			break;
@@ -234,6 +256,13 @@ int main(int argc, char *argv[])
 			parse_checks_option(false, true, optarg);
 			break;
 
+		case '@':
+			generate_symbols = 1;
+			break;
+		case 'A':
+			auto_label_aliases = 1;
+			break;
+
 		case 'h':
 			usage(NULL);
 		default:
@@ -272,11 +301,11 @@ int main(int argc, char *argv[])
 		}
 	}
 	if (streq(inform, "dts"))
-		bi = dt_from_source(arg);
+		dti = dt_from_source(arg);
 	else if (streq(inform, "fs"))
-		bi = dt_from_fs(arg);
+		dti = dt_from_fs(arg);
 	else if(streq(inform, "dtb"))
-		bi = dt_from_blob(arg);
+		dti = dt_from_blob(arg);
 	else
 		die("Unknown input format \"%s\"\n", inform);
 
@@ -286,13 +315,29 @@ int main(int argc, char *argv[])
 	}
 
 	if (cmdline_boot_cpuid != -1)
-		bi->boot_cpuid_phys = cmdline_boot_cpuid;
+		dti->boot_cpuid_phys = cmdline_boot_cpuid;
+
+	fill_fullpaths(dti->dt, "");
+	process_checks(force, dti);
+
+	/* on a plugin, generate by default */
+	if (dti->dtsflags & DTSF_PLUGIN) {
+		generate_fixups = 1;
+	}
 
-	fill_fullpaths(bi->dt, "");
-	process_checks(force, bi);
+	if (auto_label_aliases)
+		generate_label_tree(dti, "aliases", false);
+
+	if (generate_symbols)
+		generate_label_tree(dti, "__symbols__", true);
+
+	if (generate_fixups) {
+		generate_fixups_tree(dti, "__fixups__");
+		generate_local_fixups_tree(dti, "__local_fixups__");
+	}
 
 	if (sort)
-		sort_tree(bi);
+		sort_tree(dti);
 
 	if (streq(outname, "-")) {
 		outf = stdout;
@@ -304,11 +349,11 @@ int main(int argc, char *argv[])
 	}
 
 	if (streq(outform, "dts")) {
-		dt_to_source(outf, bi);
+		dt_to_source(outf, dti);
 	} else if (streq(outform, "dtb")) {
-		dt_to_blob(outf, bi, outversion);
+		dt_to_blob(outf, dti, outversion);
 	} else if (streq(outform, "asm")) {
-		dt_to_asm(outf, bi, outversion);
+		dt_to_asm(outf, dti, outversion);
 	} else if (streq(outform, "null")) {
 		/* do nothing */
 	} else {

scripts/dtc/dtc.h

@@ -53,7 +53,11 @@ extern int quiet;		/* Level of quietness */
 extern int reservenum;		/* Number of memory reservation slots */
 extern int minsize;		/* Minimum blob size */
 extern int padsize;		/* Additional padding to blob */
+extern int alignsize;		/* Additional padding to blob accroding to the alignsize */
 extern int phandle_format;	/* Use linux,phandle or phandle properties */
+extern int generate_symbols;	/* generate symbols for nodes with labels */
+extern int generate_fixups;	/* generate fixups */
+extern int auto_label_aliases;	/* auto generate labels -> aliases */
 
 #define PHANDLE_LEGACY	0x1
 #define PHANDLE_EPAPR	0x2
@@ -201,6 +205,8 @@ void delete_property(struct property *prop);
 void add_child(struct node *parent, struct node *child);
 void delete_node_by_name(struct node *parent, char *name);
 void delete_node(struct node *node);
+void append_to_property(struct node *node,
+			char *name, const void *data, int len);
 
 const char *get_unitname(struct node *node);
 struct property *get_property(struct node *node, const char *propname);
@@ -235,35 +241,44 @@ struct reserve_info *add_reserve_entry(struct reserve_info *list,
 				       struct reserve_info *new);
 
 
-struct boot_info {
+struct dt_info {
+	unsigned int dtsflags;
 	struct reserve_info *reservelist;
-	struct node *dt;		/* the device tree */
 	uint32_t boot_cpuid_phys;
+	struct node *dt;		/* the device tree */
 };
 
-struct boot_info *build_boot_info(struct reserve_info *reservelist,
-				  struct node *tree, uint32_t boot_cpuid_phys);
-void sort_tree(struct boot_info *bi);
+/* DTS version flags definitions */
+#define DTSF_V1		0x0001	/* /dts-v1/ */
+#define DTSF_PLUGIN	0x0002	/* /plugin/ */
+
+struct dt_info *build_dt_info(unsigned int dtsflags,
+			      struct reserve_info *reservelist,
+			      struct node *tree, uint32_t boot_cpuid_phys);
+void sort_tree(struct dt_info *dti);
+void generate_label_tree(struct dt_info *dti, char *name, bool allocph);
+void generate_fixups_tree(struct dt_info *dti, char *name);
+void generate_local_fixups_tree(struct dt_info *dti, char *name);
 
 /* Checks */
 
 void parse_checks_option(bool warn, bool error, const char *arg);
-void process_checks(bool force, struct boot_info *bi);
+void process_checks(bool force, struct dt_info *dti);
 
 /* Flattened trees */
 
-void dt_to_blob(FILE *f, struct boot_info *bi, int version);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version);
+void dt_to_blob(FILE *f, struct dt_info *dti, int version);
+void dt_to_asm(FILE *f, struct dt_info *dti, int version);
 
-struct boot_info *dt_from_blob(const char *fname);
+struct dt_info *dt_from_blob(const char *fname);
 
 /* Tree source */
 
-void dt_to_source(FILE *f, struct boot_info *bi);
-struct boot_info *dt_from_source(const char *f);
+void dt_to_source(FILE *f, struct dt_info *dti);
+struct dt_info *dt_from_source(const char *f);
 
 /* FS trees */
 
-struct boot_info *dt_from_fs(const char *dirname);
+struct dt_info *dt_from_fs(const char *dirname);
 
 #endif /* _DTC_H */

scripts/dtc/flattree.c

@@ -366,7 +366,7 @@ static void make_fdt_header(struct fdt_header *fdt,
 		fdt->size_dt_struct = cpu_to_fdt32(dtsize);
 }
 
-void dt_to_blob(FILE *f, struct boot_info *bi, int version)
+void dt_to_blob(FILE *f, struct dt_info *dti, int version)
 {
 	struct version_info *vi = NULL;
 	int i;
@@ -384,29 +384,36 @@ void dt_to_blob(FILE *f, struct boot_info *bi, int version)
 	if (!vi)
 		die("Unknown device tree blob version %d\n", version);
 
-	flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
+	flatten_tree(dti->dt, &bin_emitter, &dtbuf, &strbuf, vi);
 	bin_emit_cell(&dtbuf, FDT_END);
 
-	reservebuf = flatten_reserve_list(bi->reservelist, vi);
+	reservebuf = flatten_reserve_list(dti->reservelist, vi);
 
 	/* Make header */
 	make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
-			bi->boot_cpuid_phys);
+			dti->boot_cpuid_phys);
 
 	/*
 	 * If the user asked for more space than is used, adjust the totalsize.
 	 */
 	if (minsize > 0) {
 		padlen = minsize - fdt32_to_cpu(fdt.totalsize);
-		if ((padlen < 0) && (quiet < 1))
-			fprintf(stderr,
-				"Warning: blob size %d >= minimum size %d\n",
-				fdt32_to_cpu(fdt.totalsize), minsize);
+		if (padlen < 0) {
+			padlen = 0;
+			if (quiet < 1)
+				fprintf(stderr,
+					"Warning: blob size %d >= minimum size %d\n",
+					fdt32_to_cpu(fdt.totalsize), minsize);
+		}
 	}
 
 	if (padsize > 0)
 		padlen = padsize;
 
+	if (alignsize > 0)
+		padlen = ALIGN(fdt32_to_cpu(fdt.totalsize) + padlen, alignsize)
+			- fdt32_to_cpu(fdt.totalsize);
+
 	if (padlen > 0) {
 		int tsize = fdt32_to_cpu(fdt.totalsize);
 		tsize += padlen;
@@ -460,7 +467,7 @@ static void dump_stringtable_asm(FILE *f, struct data strbuf)
 	}
 }
 
-void dt_to_asm(FILE *f, struct boot_info *bi, int version)
+void dt_to_asm(FILE *f, struct dt_info *dti, int version)
 {
 	struct version_info *vi = NULL;
 	int i;
@@ -500,7 +507,7 @@ void dt_to_asm(FILE *f, struct boot_info *bi, int version)
 
 	if (vi->flags & FTF_BOOTCPUID) {
 		fprintf(f, "\t/* boot_cpuid_phys */\n");
-		asm_emit_cell(f, bi->boot_cpuid_phys);
+		asm_emit_cell(f, dti->boot_cpuid_phys);
 	}
 
 	if (vi->flags & FTF_STRTABSIZE) {
@@ -530,7 +537,7 @@ void dt_to_asm(FILE *f, struct boot_info *bi, int version)
 	 * Use .long on high and low halfs of u64s to avoid .quad
 	 * as it appears .quad isn't available in some assemblers.
 	 */
-	for (re = bi->reservelist; re; re = re->next) {
+	for (re = dti->reservelist; re; re = re->next) {
 		struct label *l;
 
 		for_each_label(re->labels, l) {
@@ -550,7 +557,7 @@ void dt_to_asm(FILE *f, struct boot_info *bi, int version)
 	fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
 
 	emit_label(f, symprefix, "struct_start");
-	flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
+	flatten_tree(dti->dt, &asm_emitter, f, &strbuf, vi);
 
 	fprintf(f, "\t/* FDT_END */\n");
 	asm_emit_cell(f, FDT_END);
@@ -572,6 +579,8 @@ void dt_to_asm(FILE *f, struct boot_info *bi, int version)
 	if (padsize > 0) {
 		fprintf(f, "\t.space\t%d, 0\n", padsize);
 	}
+	if (alignsize > 0)
+		asm_emit_align(f, alignsize);
 	emit_label(f, symprefix, "blob_abs_end");
 
 	data_free(strbuf);
@@ -797,11 +806,15 @@ static struct node *unflatten_tree(struct inbuf *dtbuf,
 		}
 	} while (val != FDT_END_NODE);
 
+	if (node->name != flatname) {
+		free(flatname);
+	}
+
 	return node;
 }
 
 
-struct boot_info *dt_from_blob(const char *fname)
+struct dt_info *dt_from_blob(const char *fname)
 {
 	FILE *f;
 	uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
@@ -929,5 +942,5 @@ struct boot_info *dt_from_blob(const char *fname)
 
 	fclose(f);
 
-	return build_boot_info(reservelist, tree, boot_cpuid_phys);
+	return build_dt_info(DTSF_V1, reservelist, tree, boot_cpuid_phys);
 }

scripts/dtc/fstree.c

@@ -79,13 +79,12 @@ static struct node *read_fstree(const char *dirname)
 	return tree;
 }
 
-struct boot_info *dt_from_fs(const char *dirname)
+struct dt_info *dt_from_fs(const char *dirname)
 {
 	struct node *tree;
 
 	tree = read_fstree(dirname);
 	tree = name_node(tree, "");
 
-	return build_boot_info(NULL, tree, guess_boot_cpuid(tree));
+	return build_dt_info(DTSF_V1, NULL, tree, guess_boot_cpuid(tree));
 }
-

scripts/dtc/libfdt/Makefile.libfdt

@@ -7,5 +7,5 @@ LIBFDT_soname = libfdt.$(SHAREDLIB_EXT).1
 LIBFDT_INCLUDES = fdt.h libfdt.h libfdt_env.h
 LIBFDT_VERSION = version.lds
 LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c fdt_empty_tree.c \
-	fdt_addresses.c
+	fdt_addresses.c fdt_overlay.c
 LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)

scripts/dtc/libfdt/fdt_ro.c

@@ -88,6 +88,32 @@ static int _fdt_string_eq(const void *fdt, int stroffset,
 	return (strlen(p) == len) && (memcmp(p, s, len) == 0);
 }
 
+uint32_t fdt_get_max_phandle(const void *fdt)
+{
+	uint32_t max_phandle = 0;
+	int offset;
+
+	for (offset = fdt_next_node(fdt, -1, NULL);;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		uint32_t phandle;
+
+		if (offset == -FDT_ERR_NOTFOUND)
+			return max_phandle;
+
+		if (offset < 0)
+			return (uint32_t)-1;
+
+		phandle = fdt_get_phandle(fdt, offset);
+		if (phandle == (uint32_t)-1)
+			continue;
+
+		if (phandle > max_phandle)
+			max_phandle = phandle;
+	}
+
+	return 0;
+}
+
 int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
 {
 	FDT_CHECK_HEADER(fdt);
@@ -545,7 +571,7 @@ int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property)
 
 	list = fdt_getprop(fdt, nodeoffset, property, &length);
 	if (!list)
-		return -length;
+		return length;
 
 	end = list + length;
 
@@ -571,7 +597,7 @@ int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
 
 	list = fdt_getprop(fdt, nodeoffset, property, &length);
 	if (!list)
-		return -length;
+		return length;
 
 	len = strlen(string) + 1;
 	end = list + length;

scripts/dtc/libfdt/fdt_rw.c

@@ -191,17 +191,13 @@ int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
 int fdt_del_mem_rsv(void *fdt, int n)
 {
 	struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
-	int err;
 
 	FDT_RW_CHECK_HEADER(fdt);
 
 	if (n >= fdt_num_mem_rsv(fdt))
 		return -FDT_ERR_NOTFOUND;
 
-	err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
-	if (err)
-		return err;
-	return 0;
+	return _fdt_splice_mem_rsv(fdt, re, 1, 0);
 }
 
 static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,

scripts/dtc/libfdt/fdt_strerror.c

@@ -69,6 +69,7 @@ static struct fdt_errtabent fdt_errtable[] = {
 
 	FDT_ERRTABENT(FDT_ERR_BADOFFSET),
 	FDT_ERRTABENT(FDT_ERR_BADPATH),
+	FDT_ERRTABENT(FDT_ERR_BADPHANDLE),
 	FDT_ERRTABENT(FDT_ERR_BADSTATE),
 
 	FDT_ERRTABENT(FDT_ERR_TRUNCATED),
@@ -76,6 +77,11 @@ static struct fdt_errtabent fdt_errtable[] = {
 	FDT_ERRTABENT(FDT_ERR_BADVERSION),
 	FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
 	FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
+	FDT_ERRTABENT(FDT_ERR_INTERNAL),
+	FDT_ERRTABENT(FDT_ERR_BADNCELLS),
+	FDT_ERRTABENT(FDT_ERR_BADVALUE),
+	FDT_ERRTABENT(FDT_ERR_BADOVERLAY),
+	FDT_ERRTABENT(FDT_ERR_NOPHANDLES),
 };
 #define FDT_ERRTABSIZE	(sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
 

scripts/dtc/libfdt/fdt_wip.c

@@ -55,21 +55,42 @@
 
 #include "libfdt_internal.h"
 
+int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
+					const char *name, int namelen,
+					uint32_t idx, const void *val,
+					int len)
+{
+	void *propval;
+	int proplen;
+
+	propval = fdt_getprop_namelen_w(fdt, nodeoffset, name, namelen,
+					&proplen);
+	if (!propval)
+		return proplen;
+
+	if (proplen < (len + idx))
+		return -FDT_ERR_NOSPACE;
+
+	memcpy((char *)propval + idx, val, len);
+	return 0;
+}
+
 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 			const void *val, int len)
 {
-	void *propval;
+	const void *propval;
 	int proplen;
 
-	propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
+	propval = fdt_getprop(fdt, nodeoffset, name, &proplen);
 	if (! propval)
 		return proplen;
 
 	if (proplen != len)
 		return -FDT_ERR_NOSPACE;
 
-	memcpy(propval, val, len);
-	return 0;
+	return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name,
+						   strlen(name), 0,
+						   val, len);
 }
 
 static void _fdt_nop_region(void *start, int len)

scripts/dtc/libfdt/libfdt.h

@@ -61,7 +61,7 @@
 #define FDT_ERR_NOTFOUND	1
 	/* FDT_ERR_NOTFOUND: The requested node or property does not exist */
 #define FDT_ERR_EXISTS		2
-	/* FDT_ERR_EXISTS: Attemped to create a node or property which
+	/* FDT_ERR_EXISTS: Attempted to create a node or property which
 	 * already exists */
 #define FDT_ERR_NOSPACE		3
 	/* FDT_ERR_NOSPACE: Operation needed to expand the device
@@ -79,8 +79,10 @@
 	 * (e.g. missing a leading / for a function which requires an
 	 * absolute path) */
 #define FDT_ERR_BADPHANDLE	6
-	/* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
-	 * value.  phandle values of 0 and -1 are not permitted. */
+	/* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
+	 * This can be caused either by an invalid phandle property
+	 * length, or the phandle value was either 0 or -1, which are
+	 * not permitted. */
 #define FDT_ERR_BADSTATE	7
 	/* FDT_ERR_BADSTATE: Function was passed an incomplete device
 	 * tree created by the sequential-write functions, which is
@@ -126,7 +128,16 @@
 	 * value. For example: a property expected to contain a string list
 	 * is not NUL-terminated within the length of its value. */
 
-#define FDT_ERR_MAX		15
+#define FDT_ERR_BADOVERLAY	16
+	/* FDT_ERR_BADOVERLAY: The device tree overlay, while
+	 * correctly structured, cannot be applied due to some
+	 * unexpected or missing value, property or node. */
+
+#define FDT_ERR_NOPHANDLES	17
+	/* FDT_ERR_NOPHANDLES: The device tree doesn't have any
+	 * phandle available anymore without causing an overflow */
+
+#define FDT_ERR_MAX		17
 
 /**********************************************************************/
 /* Low-level functions (you probably don't need these)                */
@@ -168,27 +179,55 @@ int fdt_first_subnode(const void *fdt, int offset);
  */
 int fdt_next_subnode(const void *fdt, int offset);
 
+/**
+ * fdt_for_each_subnode - iterate over all subnodes of a parent
+ *
+ * @node:	child node (int, lvalue)
+ * @fdt:	FDT blob (const void *)
+ * @parent:	parent node (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ *	fdt_for_each_subnode(node, fdt, parent) {
+ *		Use node
+ *		...
+ *	}
+ *
+ *	if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) {
+ *		Error handling
+ *	}
+ *
+ * Note that this is implemented as a macro and @node is used as
+ * iterator in the loop. The parent variable be constant or even a
+ * literal.
+ *
+ */
+#define fdt_for_each_subnode(node, fdt, parent)		\
+	for (node = fdt_first_subnode(fdt, parent);	\
+	     node >= 0;					\
+	     node = fdt_next_subnode(fdt, node))
+
 /**********************************************************************/
 /* General functions                                                  */
 /**********************************************************************/
 
 #define fdt_get_header(fdt, field) \
 	(fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt) 			(fdt_get_header(fdt, magic))
+#define fdt_magic(fdt)			(fdt_get_header(fdt, magic))
 #define fdt_totalsize(fdt)		(fdt_get_header(fdt, totalsize))
 #define fdt_off_dt_struct(fdt)		(fdt_get_header(fdt, off_dt_struct))
 #define fdt_off_dt_strings(fdt)		(fdt_get_header(fdt, off_dt_strings))
 #define fdt_off_mem_rsvmap(fdt)		(fdt_get_header(fdt, off_mem_rsvmap))
 #define fdt_version(fdt)		(fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt) 	(fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt) 	(fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt) 	(fdt_get_header(fdt, size_dt_strings))
+#define fdt_last_comp_version(fdt)	(fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt)	(fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt)	(fdt_get_header(fdt, size_dt_strings))
 #define fdt_size_dt_struct(fdt)		(fdt_get_header(fdt, size_dt_struct))
 
 #define __fdt_set_hdr(name) \
 	static inline void fdt_set_##name(void *fdt, uint32_t val) \
 	{ \
-		struct fdt_header *fdth = (struct fdt_header*)fdt; \
+		struct fdt_header *fdth = (struct fdt_header *)fdt; \
 		fdth->name = cpu_to_fdt32(val); \
 	}
 __fdt_set_hdr(magic);
@@ -258,6 +297,21 @@ int fdt_move(const void *fdt, void *buf, int bufsize);
  */
 const char *fdt_string(const void *fdt, int stroffset);
 
+/**
+ * fdt_get_max_phandle - retrieves the highest phandle in a tree
+ * @fdt: pointer to the device tree blob
+ *
+ * fdt_get_max_phandle retrieves the highest phandle in the given
+ * device tree. This will ignore badly formatted phandles, or phandles
+ * with a value of 0 or -1.
+ *
+ * returns:
+ *      the highest phandle on success
+ *      0, if no phandle was found in the device tree
+ *      -1, if an error occurred
+ */
+uint32_t fdt_get_max_phandle(const void *fdt);
+
 /**
  * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
  * @fdt: pointer to the device tree blob
@@ -318,8 +372,9 @@ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
  * returns:
  *	structure block offset of the requested subnode (>=0), on success
  *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
- *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
- *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ *		tag
+ *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
  *	-FDT_ERR_BADSTRUCTURE,
@@ -351,7 +406,8 @@ int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
  * address).
  *
  * returns:
- *	structure block offset of the node with the requested path (>=0), on success
+ *	structure block offset of the node with the requested path (>=0), on
+ *		success
  *	-FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
  *	-FDT_ERR_NOTFOUND, if the requested node does not exist
  *      -FDT_ERR_BADMAGIC,
@@ -375,10 +431,12 @@ int fdt_path_offset(const void *fdt, const char *path);
  *
  * returns:
  *	pointer to the node's name, on success
- *		If lenp is non-NULL, *lenp contains the length of that name (>=0)
+ *		If lenp is non-NULL, *lenp contains the length of that name
+ *			(>=0)
  *	NULL, on error
  *		if lenp is non-NULL *lenp contains an error code (<0):
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
  *		-FDT_ERR_BADMAGIC,
  *		-FDT_ERR_BADVERSION,
  *		-FDT_ERR_BADSTATE, standard meanings
@@ -426,6 +484,33 @@ int fdt_first_property_offset(const void *fdt, int nodeoffset);
  */
 int fdt_next_property_offset(const void *fdt, int offset);
 
+/**
+ * fdt_for_each_property_offset - iterate over all properties of a node
+ *
+ * @property_offset:	property offset (int, lvalue)
+ * @fdt:		FDT blob (const void *)
+ * @node:		node offset (int)
+ *
+ * This is actually a wrapper around a for loop and would be used like so:
+ *
+ *	fdt_for_each_property_offset(property, fdt, node) {
+ *		Use property
+ *		...
+ *	}
+ *
+ *	if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) {
+ *		Error handling
+ *	}
+ *
+ * Note that this is implemented as a macro and property is used as
+ * iterator in the loop. The node variable can be constant or even a
+ * literal.
+ */
+#define fdt_for_each_property_offset(property, fdt, node)	\
+	for (property = fdt_first_property_offset(fdt, node);	\
+	     property >= 0;					\
+	     property = fdt_next_property_offset(fdt, property))
+
 /**
  * fdt_get_property_by_offset - retrieve the property at a given offset
  * @fdt: pointer to the device tree blob
@@ -490,7 +575,8 @@ const struct fdt_property *fdt_get_property_namelen(const void *fdt,
  *	NULL, on error
  *		if lenp is non-NULL, *lenp contains an error code (<0):
  *		-FDT_ERR_NOTFOUND, node does not have named property
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
  *		-FDT_ERR_BADMAGIC,
  *		-FDT_ERR_BADVERSION,
  *		-FDT_ERR_BADSTATE,
@@ -554,6 +640,13 @@ const void *fdt_getprop_by_offset(const void *fdt, int offset,
  */
 const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
 				const char *name, int namelen, int *lenp);
+static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
+					  const char *name, int namelen,
+					  int *lenp)
+{
+	return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
+						      namelen, lenp);
+}
 
 /**
  * fdt_getprop - retrieve the value of a given property
@@ -575,7 +668,8 @@ const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
  *	NULL, on error
  *		if lenp is non-NULL, *lenp contains an error code (<0):
  *		-FDT_ERR_NOTFOUND, node does not have named property
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
+ *			tag
  *		-FDT_ERR_BADMAGIC,
  *		-FDT_ERR_BADVERSION,
  *		-FDT_ERR_BADSTATE,
@@ -617,7 +711,7 @@ const char *fdt_get_alias_namelen(const void *fdt,
 				  const char *name, int namelen);
 
 /**
- * fdt_get_alias - retreive the path referenced by a given alias
+ * fdt_get_alias - retrieve the path referenced by a given alias
  * @fdt: pointer to the device tree blob
  * @name: name of the alias th look up
  *
@@ -647,7 +741,7 @@ const char *fdt_get_alias(const void *fdt, const char *name);
  *	0, on success
  *		buf contains the absolute path of the node at
  *		nodeoffset, as a NUL-terminated string.
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
  *		characters and will not fit in the given buffer.
  *	-FDT_ERR_BADMAGIC,
@@ -677,11 +771,11 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
  * structure from the start to nodeoffset.
  *
  * returns:
-
  *	structure block offset of the node at node offset's ancestor
  *		of depth supernodedepth (>=0), on success
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
-*	-FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
+ *		nodeoffset
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -703,7 +797,7 @@ int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
  *
  * returns:
  *	depth of the node at nodeoffset (>=0), on success
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -726,7 +820,7 @@ int fdt_node_depth(const void *fdt, int nodeoffset);
  * returns:
  *	structure block offset of the parent of the node at nodeoffset
  *		(>=0), on success
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -766,7 +860,7 @@ int fdt_parent_offset(const void *fdt, int nodeoffset);
  *		 on success
  *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
  *		tree after startoffset
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -813,7 +907,7 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
  *	1, if the node has a 'compatible' property, but it does not list
  *		the given string
  *	-FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
- * 	-FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -850,7 +944,7 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset,
  *		 on success
  *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
  *		tree after startoffset
- * 	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -960,7 +1054,8 @@ const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
  * returns:
  *	0 <= n < FDT_MAX_NCELLS, on success
  *      2, if the node has no #address-cells property
- *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid #address-cells property
+ *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ *		#address-cells property
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -980,7 +1075,8 @@ int fdt_address_cells(const void *fdt, int nodeoffset);
  * returns:
  *	0 <= n < FDT_MAX_NCELLS, on success
  *      2, if the node has no #address-cells property
- *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid #size-cells property
+ *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ *		#size-cells property
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
  *	-FDT_ERR_BADSTATE,
@@ -994,6 +1090,27 @@ int fdt_size_cells(const void *fdt, int nodeoffset);
 /* Write-in-place functions                                           */
 /**********************************************************************/
 
+/**
+ * fdt_setprop_inplace_namelen_partial - change a property's value,
+ *                                       but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @namelen: number of characters of name to consider
+ * @idx: index of the property to change in the array
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * Identical to fdt_setprop_inplace(), but modifies the given property
+ * starting from the given index, and using only the first characters
+ * of the name. It is useful when you want to manipulate only one value of
+ * an array and you have a string that doesn't end with \0.
+ */
+int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
+					const char *name, int namelen,
+					uint32_t idx, const void *val,
+					int len);
+
 /**
  * fdt_setprop_inplace - change a property's value, but not its size
  * @fdt: pointer to the device tree blob
@@ -1604,9 +1721,11 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
  * change the offsets of some existing nodes.
 
  * returns:
- *	structure block offset of the created nodeequested subnode (>=0), on success
+ *	structure block offset of the created nodeequested subnode (>=0), on
+ *		success
  *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
- *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
+ *		tag
  *	-FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
  *		the given name
  *	-FDT_ERR_NOSPACE, if there is insufficient free space in the
@@ -1644,6 +1763,37 @@ int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
  */
 int fdt_del_node(void *fdt, int nodeoffset);
 
+/**
+ * fdt_overlay_apply - Applies a DT overlay on a base DT
+ * @fdt: pointer to the base device tree blob
+ * @fdto: pointer to the device tree overlay blob
+ *
+ * fdt_overlay_apply() will apply the given device tree overlay on the
+ * given base device tree.
+ *
+ * Expect the base device tree to be modified, even if the function
+ * returns an error.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there's not enough space in the base device tree
+ *	-FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
+ *		properties in the base DT
+ *	-FDT_ERR_BADPHANDLE,
+ *	-FDT_ERR_BADOVERLAY,
+ *	-FDT_ERR_NOPHANDLES,
+ *	-FDT_ERR_INTERNAL,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADOFFSET,
+ *	-FDT_ERR_BADPATH,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_overlay_apply(void *fdt, void *fdto);
+
 /**********************************************************************/
 /* Debugging / informational functions                                */
 /**********************************************************************/

scripts/dtc/libfdt/libfdt_env.h

@@ -54,6 +54,7 @@
 
 #include <stddef.h>
 #include <stdint.h>
+#include <stdlib.h>
 #include <string.h>
 
 #ifdef __CHECKER__

scripts/dtc/srcpos.c

@@ -246,46 +246,27 @@ srcpos_copy(struct srcpos *pos)
 	return pos_new;
 }
 
-
-
-void
-srcpos_dump(struct srcpos *pos)
-{
-	printf("file        : \"%s\"\n",
-	       pos->file ? (char *) pos->file : "<no file>");
-	printf("first_line  : %d\n", pos->first_line);
-	printf("first_column: %d\n", pos->first_column);
-	printf("last_line   : %d\n", pos->last_line);
-	printf("last_column : %d\n", pos->last_column);
-	printf("file        : %s\n", pos->file->name);
-}
-
-
 char *
 srcpos_string(struct srcpos *pos)
 {
 	const char *fname = "<no-file>";
 	char *pos_str;
-	int rc;
 
 	if (pos)
 		fname = pos->file->name;
 
 
 	if (pos->first_line != pos->last_line)
-		rc = asprintf(&pos_str, "%s:%d.%d-%d.%d", fname,
-			      pos->first_line, pos->first_column,
-			      pos->last_line, pos->last_column);
+		xasprintf(&pos_str, "%s:%d.%d-%d.%d", fname,
+			  pos->first_line, pos->first_column,
+			  pos->last_line, pos->last_column);
 	else if (pos->first_column != pos->last_column)
-		rc = asprintf(&pos_str, "%s:%d.%d-%d", fname,
-			      pos->first_line, pos->first_column,
-			      pos->last_column);
+		xasprintf(&pos_str, "%s:%d.%d-%d", fname,
+			  pos->first_line, pos->first_column,
+			  pos->last_column);
 	else
-		rc = asprintf(&pos_str, "%s:%d.%d", fname,
-			      pos->first_line, pos->first_column);
-
-	if (rc == -1)
-		die("Couldn't allocate in srcpos string");
+		xasprintf(&pos_str, "%s:%d.%d", fname,
+			  pos->first_line, pos->first_column);
 
 	return pos_str;
 }

scripts/dtc/srcpos.h

@@ -105,7 +105,6 @@ extern struct srcpos srcpos_empty;
 extern void srcpos_update(struct srcpos *pos, const char *text, int len);
 extern struct srcpos *srcpos_copy(struct srcpos *pos);
 extern char *srcpos_string(struct srcpos *pos);
-extern void srcpos_dump(struct srcpos *pos);
 
 extern void srcpos_verror(struct srcpos *pos, const char *prefix,
 			  const char *fmt, va_list va)

scripts/dtc/treesource.c

@@ -25,12 +25,12 @@ extern FILE *yyin;
 extern int yyparse(void);
 extern YYLTYPE yylloc;
 
-struct boot_info *the_boot_info;
+struct dt_info *parser_output;
 bool treesource_error;
 
-struct boot_info *dt_from_source(const char *fname)
+struct dt_info *dt_from_source(const char *fname)
 {
-	the_boot_info = NULL;
+	parser_output = NULL;
 	treesource_error = false;
 
 	srcfile_push(fname);
@@ -43,7 +43,7 @@ struct boot_info *dt_from_source(const char *fname)
 	if (treesource_error)
 		die("Syntax error parsing input tree\n");
 
-	return the_boot_info;
+	return parser_output;
 }
 
 static void write_prefix(FILE *f, int level)
@@ -263,13 +263,13 @@ static void write_tree_source_node(FILE *f, struct node *tree, int level)
 }
 
 
-void dt_to_source(FILE *f, struct boot_info *bi)
+void dt_to_source(FILE *f, struct dt_info *dti)
 {
 	struct reserve_info *re;
 
 	fprintf(f, "/dts-v1/;\n\n");
 
-	for (re = bi->reservelist; re; re = re->next) {
+	for (re = dti->reservelist; re; re = re->next) {
 		struct label *l;
 
 		for_each_label(re->labels, l)
@@ -279,6 +279,6 @@ void dt_to_source(FILE *f, struct boot_info *bi)
 			(unsigned long long)re->re.size);
 	}
 
-	write_tree_source_node(f, bi->dt, 0);
+	write_tree_source_node(f, dti->dt, 0);
 }
 

scripts/dtc/util.c

@@ -46,6 +46,36 @@ char *xstrdup(const char *s)
 	return d;
 }
 
+/* based in part from (3) vsnprintf */
+int xasprintf(char **strp, const char *fmt, ...)
+{
+	int n, size = 128;	/* start with 128 bytes */
+	char *p;
+	va_list ap;
+
+	/* initial pointer is NULL making the fist realloc to be malloc */
+	p = NULL;
+	while (1) {
+		p = xrealloc(p, size);
+
+		/* Try to print in the allocated space. */
+		va_start(ap, fmt);
+		n = vsnprintf(p, size, fmt, ap);
+		va_end(ap);
+
+		/* If that worked, return the string. */
+		if (n > -1 && n < size)
+			break;
+		/* Else try again with more space. */
+		if (n > -1)	/* glibc 2.1 */
+			size = n + 1; /* precisely what is needed */
+		else		/* glibc 2.0 */
+			size *= 2; /* twice the old size */
+	}
+	*strp = p;
+	return strlen(p);
+}
+
 char *join_path(const char *path, const char *name)
 {
 	int lenp = strlen(path);

scripts/dtc/util.h

@@ -59,6 +59,7 @@ static inline void *xrealloc(void *p, size_t len)
 }
 
 extern char *xstrdup(const char *s);
+extern int xasprintf(char **strp, const char *fmt, ...);
 extern char *join_path(const char *path, const char *name);
 
 /**

scripts/dtc/version_gen.h

-#define DTC_VERSION "DTC 1.4.1-g53bf130b"
+#define DTC_VERSION "DTC 1.4.2-g0931cea3"