- 03 6月, 2013 5 次提交
-
-
由 Bob Peterson 提交于
This patch sets the log descriptor type according to whether the journal commit is for (journaled) data or metadata. This was recently broken when the functions to process data and metadata log ops were combined. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k fix from Geert Uytterhoeven: "A boot lock-up on Mac, also destined for stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Recent bug fixes, one of them touches a common code file. It adds two #ifndef/#endif pairs to asm-generic/io.h to be able to override xlate_dev_kmem_ptr and xlate_dev_mem_ptr." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: Fix gmap notifier address s390/dasd: fix handling of gone paths s390/pgtable: Fix check for pgste/storage key handling arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() s390/smp: lost IPIs on cpu hotplug kernel: Fix s390 absolute memory access for /dev/mem s390/dma: do not call debug_dma after free
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: - Fix for yet another xattr bug which may lead to NULL deref. - A subtle bug in for_each_descendant_pre(). This bug requires quite specific conditions to trigger and isn't too likely to actually happen in the wild, but maybe that just makes it that much more nastier. - A warning message added for silly cgroup re-mount (not -o remount, but unmount followed by mount) behavior. * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: warn about mismatching options of a new mount of an existing hierarchy cgroup: fix a subtle bug in descendant pre-order walk cgroup: initialize xattr before calling d_instantiate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata changes from Tejun Heo: "Nothing too interesting. PCI ID additions, some sata_rcar fixes and a fringe bug fix for DMADIR handling which shouldn't affect any device remotely modern." * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_rcar: fix interrupt handling ahci: add an observed PCI ID for Marvell 88se9172 SATA controller sata_rcar: clear STOP bit in bmdma_start() method libata: make ata_exec_internal_sg honor DMADIR ata_piix: add PCI IDs for Intel BayTail libata: update "Maintained by:" tags
-
- 02 6月, 2013 3 次提交
-
-
由 Linus Torvalds 提交于
-
由 Sergei Shtylyov 提交于
The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "This patcheset includes fixes for: - the PCI/LBA which brings back the stifb graphics framebuffer console - possible memory overflows in parisc kernel init code - parport support on older GSC machines - avoids that users by mistake enable PARPORT_PC_SUPERIO on parisc - MAINTAINERS file list updates for parisc." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: parport0: fix this legacy no-device port driver! parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) parisc/PCI: Set type for LBA bus_num resource MAINTAINERS: update parisc architecture file list parisc: kernel: using strlcpy() instead of strcpy() parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 parisc: memory overflow, 'name' length is too short for using
-
- 01 6月, 2013 32 次提交
-
-
由 Helge Deller 提交于
Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
commit dc7dce28 Author: Bjorn Helgaas <bhelgaas@google.com> Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Chen Gang 提交于
'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Paul Bolle 提交于
There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Chen Gang 提交于
'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "Here are a few more fixes for powerpc 3.10. It's a bit more than I would have liked this late in the game but I suppose that's what happens with a brand new chip generation coming out. A few regression fixes, some last minute fixes for new P8 features such as transactional memory,... There's also one powerpc KVM patch that I requested that adds two missing functions to our in-kernel interrupt controller support which is itself a new 3.10 feature. These are defined by the base hypervisor specification. We didn't implement them originally because Linux doesn't use them but they are simple and I'm not comfortable having a half-implemented interface in 3.10 and having to deal with versionning etc... later when something starts needing those calls. They cannot be emulated in qemu when using in-kernel interrupt controller (not enough shared state). Just added a last minute patch to fix a typo introducing a breakage in our cputable for Power7+ processors, sorry about that, but the regression it fixes just hurt me :-)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/cputable: Fix typo on P7+ cputable entry powerpc/perf: Add missing SIER support powerpc/perf: Revert to original NO_SIPR logic powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation powerpc/32bit:Store temporary result in r0 instead of r8 powerpc/mm: Always invalidate tlb on hpte invalidate and update powerpc/pseries: Improve stream generation comments in copypage/user powerpc/pseries: Kill all prefetch streams on context switch powerpc/cputable: Fix oprofile_cpu_type on power8 powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions powerpc/tm: Move TM abort cause codes to uapi powerpc/tm: Abort on emulation and alignment faults powerpc/tm: Update cause codes documentation powerpc/tm: Make room for hypervisor in abort cause codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target fixes from Nicholas Bellinger: "The highlights include: - Re-instate sess->wait_list in target_wait_for_sess_cmds() for active I/O shutdown handling in fabrics using se_cmd->cmd_kref - Make ib_srpt call target_sess_cmd_list_set_waiting() during session shutdown - Fix FILEIO off-by-one READ_CAPACITY bug for !S_ISBLK export - Fix iscsi-target login error heap buffer overflow (Kees) - Fix iscsi-target active I/O shutdown handling regression in v3.10-rc1 A big thanks to Kees Cook for fixing a long standing login error buffer overflow bug. All patches are CC'ed to stable with the exception of the v3.10-rc1 specific regression + other minor target cleanup." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling target: Propigate up ->cmd_kref put return via transport_generic_free_cmd iscsi-target: fix heap buffer overflow on error target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session target: Re-instate sess_wait_list for target_wait_for_sess_cmds target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds
-
git://git.linaro.org/people/mturquette/linux由 Linus Torvalds 提交于
Pull clock subsystem fixes from Mike Turquette: "A mix of small fixes affecting mostly ARM platforms as well as a discrete clock expander chip. Most fixes are corrections to lousy clock data of one form or another." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: Include clk mxs header file clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() clk: si5351: Set initial clkout rate when defined in platform data. clk: si5351: Fix clkout rate computation. clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks clk: ux500: clk-sysctrl: handle clocks with no parents clk: ux500: Provide device enumeration number suffix for SMSC911x
-
由 Linus Torvalds 提交于
Merge tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev Pull fbdev fixes from Jean-Christophe PLAGNIOL-VILLARD: "This contains some small fixes - Atmel LCDC: fix blank the backlight on remove - ps3fb: fix compile warning - OMAPDSS: Fix crash with DT boot" * tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: atmel_lcdfb: blank the backlight on remove trivial: atmel_lcdfb: add missing error message OMAPDSS: Fix crash with DT boot fbdev/ps3fb: fix compile warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull assorted fixes from Al Viro: "There'll be more - I'm trying to dig out from under the pile of mail (a couple of weeks of something flu-like ;-/) and there's several more things waiting for review; this is just the obvious stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: zoran: racy refcount handling in vm_ops ->open()/->close() befs_readdir(): do not increment ->f_pos if filldir tells us to stop hpfs: deadlock and race in directory lseek() qnx6: qnx6_readdir() has a braino in pos calculation fix buffer leak after "scsi: saner replacements for ->proc_info()" vfs: Fix invalid ida_remove() call
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull two NFS client fixes from Trond Myklebust: - Fix a regression that broke NFS mounting using klibc and busybox - Stable fix to check access modes correctly on NFSv4 delegated open() * tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix security flavor negotiation with legacy binary mounts NFSv4: Fix a thinko in nfs4_try_open_cached
-
由 Will Schmidt 提交于
Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Commit 8f61aa32 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
This is a revert and then some of commit 860aad71 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
These comments already don't apply to the current code. So just remove them. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Srivatsa S. Bhat 提交于
Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: stable@vger.kernel.org Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Priyanka Jain 提交于
Commit a9c4e541 "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: NPriyanka Jain <Priyanka.Jain@freescale.com> CC: <stable@vger.kernel.org> [v3.7+] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbdSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
No code changes, just documenting what's happening a little better. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nishanth Aravamudan 提交于
Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 chenhui zhao 提交于
For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: NMichael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: NMichael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.cSigned-off-by: NMichael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Signed-off-by: NMichael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9 only Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-