If there are racing calls to ext4_commit_super() it's possible for
another writeback of the superblock to result in the buffer being
marked with an error after we check if the buffer is marked as having
a write error and the buffer up-to-date flag is set again.  If that
happens mark_buffer_dirty() can end up throwing a WARN_ON_ONCE.

Fix this by moving this check to write before we call
write_buffer_dirty(), and keeping the buffer locked during this whole
sequence.
Signed-off-by: NPranay Kr. Srivastava <pranjas@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Commit 06bd3c36 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]
Reported-and-tested-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

ext4_dx_csum_verify() returns the success return value in two checksum
verification failure cases. We need to set the return values to zero
as failure like ext4_dirent_csum_verify() returning zero when failing
to find a checksum dirent at the tail.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NYoungjin Gil <youngjin.gil@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:

	ext4_lblk_t last = lblock + len - 1;

	if (len == 0 || lblock > last)
		return 0;

since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().

We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).

Fixes: 5946d089 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865 ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPhil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The jbd2 journal stores the commit time in 64-bit seconds and 32-bit
nanoseconds, which avoids an overflow in 2038, but it gets the numbers
from current_kernel_time(), which uses 'long' seconds on 32-bit
architectures.

This simply changes the code to call current_kernel_time64() so
we use 64-bit seconds consistently.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

So far we were tracking only dependency on transaction commit due to
starting a new handle (which may require commit to start a new
transaction). Now add tracking also for other cases where we wait for
transaction commit. This way lockdep can catch deadlocks e. g. because we
call jbd2_journal_stop() for a synchronous handle with some locks held
which rank below transaction start.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently lockdep map is tracked in each journal handle. To be able to
expand lockdep support to cover also other cases where we depend on
transaction commit and where handle is not available, move lockdep map
into struct journal_s. Since this makes the lockdep map shared for all
handles, we have to use rwsem_acquire_read() for acquisitions now.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The transaction the handle references is free to commit once we've
decremented t_updates counter. Move the lockdep instrumentation to that
place. Currently it was a bit later which did not really matter but
subsequent improvements to lockdep instrumentation would cause false
positives with it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Also, if we are going to issue the barrier, we should do this after we
write out the parent directories if necessary.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

If there are no pending blocks to be released after a commit, forcing
a journal commit has no hope of helping.  It's possible that a commit
had just completed, so if there are now free blocks available for
allocation, it's worth retrying the commit.
Reported-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The self-test was updated to cover zero-length strings; the function
needs to be updated, too.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original name was simply hash_string(), but that conflicted with a
function with that name in drivers/base/power/trace.c, and I decided
that calling it "hashlen_" was better anyway.

But you have to do it in two places.

[ This caused build errors for architectures that don't define
  CONFIG_DCACHE_WORD_ACCESS   - Linus ]
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts.  However, there is a problem that the options
may disappear after remount.  If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.

To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the
kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: c8f33d0b ("affs: kstrdup() memory handling")
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v4.1+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: ce657611 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more MIPS updates from Ralf Baechle:
 "This is the secondnd batch of MIPS patches for 4.7. Summary:

  CPS:
   - Copy EVA configuration when starting secondary VPs.

  EIC:
   - Clear Status IPL.

  Lasat:
   - Fix a few off by one bugs.

  lib:
   - Mark intrinsics notrace.  Not only are the intrinsics
     uninteresting, it would cause infinite recursion.

  MAINTAINERS:
   - Add file patterns for MIPS BRCM device tree bindings.
   - Add file patterns for mips device tree bindings.

  MT7628:
   - Fix MT7628 pinmux typos.
   - wled_an pinmux gpio.
   - EPHY LEDs pinmux support.

  Pistachio:
   - Enable KASLR

  VDSO:
   - Build microMIPS VDSO for microMIPS kernels.
   - Fix aliasing warning by building with `-fno-strict-aliasing' for
     debugging but also tracing them might result in recursion.

  Misc:
   - Add missing FROZEN hotplug notifier transitions.
   - Fix clk binding example for varioius PIC32 devices.
   - Fix cpu interrupt controller node-names in the DT files.
   - Fix XPA CPU feature separation.
   - Fix write_gc0_* macros when writing zero.
   - Add inline asm encoding helpers.
   - Add missing VZ accessor microMIPS encodings.
   - Fix little endian microMIPS MSA encodings.
   - Add 64-bit HTW fields and fix its configuration.
   - Fix sigreturn via VDSO on microMIPS kernel.
   - Lots of typo fixes.
   - Add definitions of SegCtl registers and use them"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits)
  MIPS: Add missing FROZEN hotplug notifier transitions
  MIPS: Build microMIPS VDSO for microMIPS kernels
  MIPS: Fix sigreturn via VDSO on microMIPS kernel
  MIPS: devicetree: fix cpu interrupt controller node-names
  MIPS: VDSO: Build with `-fno-strict-aliasing'
  MIPS: Pistachio: Enable KASLR
  MIPS: lib: Mark intrinsics notrace
  MIPS: Fix 64-bit HTW configuration
  MIPS: Add 64-bit HTW fields
  MAINTAINERS: Add file patterns for mips device tree bindings
  MAINTAINERS: Add file patterns for mips brcm device tree bindings
  MIPS: Simplify DSP instruction encoding macros
  MIPS: Add missing tlbinvf/XPA microMIPS encodings
  MIPS: Fix little endian microMIPS MSA encodings
  MIPS: Add missing VZ accessor microMIPS encodings
  MIPS: Add inline asm encoding helpers
  MIPS: Spelling fix lets -> let's
  MIPS: VR41xx: Fix typo
  MIPS: oprofile: Fix typo
  MIPS: math-emu: Fix typo
  ...

Various builds (such as i386:allmodconfig) fail with

  fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return'
  fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token

[ Oops. My bad, I had stupidly thought that "allmodconfig" covered this
  on x86-64 too, but it obviously doesn't.  Egg on my face.  - Linus ]

Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull string hash improvements from George Spelvin:
 "This series does several related things:

   - Makes the dcache hash (fs/namei.c) useful for general kernel use.

     (Thanks to Bruce for noticing the zero-length corner case)

   - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the
     above.

   - Avoids 64-bit multiplies in hash_64() on 32-bit platforms.  Two
     32-bit multiplies will do well enough.

   - Rids the world of the bad hash multipliers in hash_32.

     This finishes the job started in commit 689de1d6 ("Minimal
     fix-up of bad hashing behavior of hash_64()")

     The vast majority of Linux architectures have hardware support for
     32x32-bit multiply and so derive no benefit from "simplified"
     multipliers.

     The few processors that do not (68000, h8/300 and some models of
     Microblaze) have arch-specific implementations added.  Those
     patches are last in the series.

   - Overhauls the dcache hash mixing.

     The patch in commit 0fed3ac8 ("namei: Improve hash mixing if
     CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion.
     Replaced with a much more careful design that's simultaneously
     faster and better.  (My own invention, as there was noting suitable
     in the literature I could find.  Comments welcome!)

   - Modify the hash_name() loop to skip the initial HASH_MIX().  This
     would let us salt the hash if we ever wanted to.

   - Sort out partial_name_hash().

     The hash function is declared as using a long state, even though
     it's truncated to 32 bits at the end and the extra internal state
     contributes nothing to the result.  And some callers do odd things:

      - fs/hfs/string.c only allocates 32 bits of state
      - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes

   - Modify bytemask_from_count to handle inputs of 1..sizeof(long)
     rather than 0..sizeof(long)-1.  This would simplify users other
     than full_name_hash"

  Special thanks to Bruce Fields for testing and finding bugs in v1.  (I
  learned some humbling lessons about "obviously correct" code.)

  On the arch-specific front, the m68k assembly has been tested in a
  standalone test harness, I've been in contact with the Microblaze
  maintainers who mostly don't care, as the hardware multiplier is never
  omitted in real-world applications, and I haven't heard anything from
  the H8/300 world"

* 'hash' of git://ftp.sciencehorizons.net/linux:
  h8300: Add <asm/hash.h>
  microblaze: Add <asm/hash.h>
  m68k: Add <asm/hash.h>
  <linux/hash.h>: Add support for architecture-specific functions
  fs/namei.c: Improve dcache hash function
  Eliminate bad hash multipliers from hash_32() and  hash_64()
  Change hash_64() return value to 32 bits
  <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string()
  fs/namei.c: Add hashlen_string() function
  Pull out string hash to <linux/stringhash.h>

This will improve the performance of hash_32() and hash_64(), but due
to complete lack of multi-bit shift instructions on H8, performance will
still be bad in surrounding code.

Designing H8-specific hash algorithms to work around that is a separate
project.  (But if the maintainers would like to get in touch...)
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp

Microblaze is an FPGA soft core that can be configured various ways.

If it is configured without a multiplier, the standard __hash_32()
will require a call to __mulsi3, which is a slow software loop.

Instead, use a shift-and-add sequence for the constant multiply.
GCC knows how to do this, but it's not as clever as some.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>

This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647
for the original mc68000, which lacks a 32x32-bit multiply instruction.

Yes, the amount of optimization effort put in is excessive. :-)

Shift-add chain found by Yevgen Voronenko's Hcub algorithm at
http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Philippe De Muyter <phdm@macq.eu>
Cc: linux-m68k@lists.linux-m68k.org

This is just the infrastructure; there are no users yet.

This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares
the existence of <asm/hash.h>.

That file may define its own versions of various functions, and define
HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones.

Included is a self-test (in lib/test_hash.c) that verifies the basics.
It is NOT in general required that the arch-specific functions compute
the same thing as the generic, but if a HAVE_* symbol is defined with
the value 1, then equality is tested.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Philippe De Muyter <phdm@macq.eu>
Cc: linux-m68k@lists.linux-m68k.org
Cc: Alistair Francis <alistai@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp

Patch 0fed3ac8 improved the hash mixing, but the function is slower
than necessary; there's a 7-instruction dependency chain (10 on x86)
each loop iteration.

Word-at-a-time access is a very tight loop (which is good, because
link_path_walk() is one of the hottest code paths in the entire kernel),
and the hash mixing function must not have a longer latency to avoid
slowing it down.

There do not appear to be any published fast hash functions that:
1) Operate on the input a word at a time, and
2) Don't need to know the length of the input beforehand, and
3) Have a single iterated mixing function, not needing conditional
   branches or unrolling to distinguish different loop iterations.

One of the algorithms which comes closest is Yann Collet's xxHash, but
that's two dependent multiplies per word, which is too much.

The key insights in this design are:

1) Barring expensive ops like multiplies, to diffuse one input bit
   across 64 bits of hash state takes at least log2(64) = 6 sequentially
   dependent instructions.  That is more cycles than we'd like.
2) An operation like "hash ^= hash << 13" requires a second temporary
   register anyway, and on a 2-operand machine like x86, it's three
   instructions.
3) A better use of a second register is to hold a two-word hash state.
   With careful design, no temporaries are needed at all, so it doesn't
   increase register pressure.  And this gets rid of register copying
   on 2-operand machines, so the code is smaller and faster.
4) Using two words of state weakens the requirement for one-round mixing;
   we now have two rounds of mixing before cancellation is possible.
5) A two-word hash state also allows operations on both halves to be
   done in parallel, so on a superscalar processor we get more mixing
   in fewer cycles.

I ended up using a mixing function inspired by the ChaCha and Speck
round functions.  It is 6 simple instructions and 3 cycles per iteration
(assuming multiply by 9 can be done by an "lea" instruction):

		x ^= *input++;
	y ^= x;	x = ROL(x, K1);
	x += y;	y = ROL(y, K2);
	y *= 9;

Not only is this reversible, two consecutive rounds are reversible:
if you are given the initial and final states, but not the intermediate
state, it is possible to compute both input words.  This means that at
least 3 words of input are required to create a collision.

(It also has the property, used by hash_name() to avoid a branch, that
it hashes all-zero to all-zero.)

The rotate constants K1 and K2 were found by experiment.  The search took
a sample of random initial states (I used 1023) and considered the effect
of flipping each of the 64 input bits on each of the 128 output bits two
rounds later.  Each of the 8192 pairs can be considered a biased coin, and
adding up the Shannon entropy of all of them produces a score.

The best-scoring shifts also did well in other tests (flipping bits in y,
trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits),
so the choice was made with the additional constraint that the sum of the
shifts is odd and not too close to the word size.

The final state is then folded into a 32-bit hash value by a less carefully
optimized multiply-based scheme.  This also has to be fast, as pathname
components tend to be short (the most common case is one iteration!), but
there's some room for latency, as there is a fair bit of intervening logic
before the hash value is used for anything.

(Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs.  I need
a better benchmark; the numbers seem to show a slight dip in performance
between 4.6.0 and this patch, but they're too noisy to quote.)

Special thanks to Bruce fields for diligent testing which uncovered a
nasty fencepost error in an earlier version of this patch.

[checkpatch.pl formatting complaints noted and respectfully disagreed with.]
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>

The "simplified" prime multipliers made very bad hash functions, so get rid
of them.  This completes the work of 689de1d6.

To avoid the inefficiency which was the motivation for the "simplified"
multipliers, hash_64() on 32-bit systems is changed to use a different
algorithm.  It makes two calls to hash_32() instead.

drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32
for some horrible reason, so it inherits a copy of the old definition.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>

That's all that's ever asked for, and it makes the return
type of hash_long() consistent.

It also allows (upcoming patch) an optimized implementation
of hash_64 on 32-bit machines.

I tried adding a BUILD_BUG_ON to ensure the number of bits requested
was never more than 32 (most callers use a compile-time constant), but
adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler
unless tools/perf/MANIFEST is updated, and understanding that code base
well enough to update it is too much trouble.  I did the rest of an
allyesconfig build with such a check, and nothing tripped.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>

Finally, the first use of previous two patches: eliminate the
separate ad-hoc string hash functions in the sunrpc code.

Now hash_str() is a wrapper around hash_string(), and hash_mem() is
likewise a wrapper around full_name_hash().

Note that sunrpc code *does* call hash_mem() with a zero length, which
is why the previous patch needed to handle that in full_name_hash().
(Thanks, Bruce, for finding that!)

This also eliminates the only caller of hash_long which asks for
more than 32 bits of output.

The comment about the quality of hashlen_string() and full_name_hash()
is jumping the gun by a few patches; they aren't very impressive now,
but will be improved greatly later in the series.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Acked-by: NJ. Bruce Fields <bfields@redhat.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: linux-nfs@vger.kernel.org

We'd like to make more use of the highly-optimized dcache hash functions
throughout the kernel, rather than have every subsystem create its own,
and a function that hashes basic null-terminated strings is required
for that.

(The name is to emphasize that it returns both hash and length.)

It's actually useful in the dcache itself, specifically d_alloc_name().
Other uses in the next patch.

full_name_hash() is also tweaked to make it more generally useful:
1) Take a "char *" rather than "unsigned char *" argument, to
   be consistent with hash_name().
2) Handle zero-length inputs.  If we want more callers, we don't want
   to make them worry about corner cases.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>

... so they can be used without the rest of <linux/dcache.h>

The hashlen_* macros will make sense next patch.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>

Pull i2c fix from Wolfram Sang:
 "A fix for a regression introduced yesterday.

  The regression didn't show up here locally because I did not have
  PAGE_POISONING enabled.  And buildbots discovered this only after it
  hit your tree.  Thanks to Dan for the quick response"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: dev: use after free in detach

Pull chrome platform updates from Olof Johansson
 "A handful of Chrome driver and binding changes this merge window:

   - a few patches to fix probing and configuration of pstore

   - a few patches adding Elan touchpad registration on a few devices

   - EC changes: a security fix dealing with max message sizes and
     addition of compat_ioctl support.

   - keyboard backlight control support

  There was also an accidential duplicate registration of trackpads on
  'Leon', which was reverted just recently"

* tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  Revert "platform/chrome: chromeos_laptop: Add Leon Touch"
  platform/chrome: chromeos_laptop - Add Elan touchpad for Wolf
  platform/chrome: chromeos_laptop - Add elan trackpad option for C720
  platform/chrome: cros_ec_dev - Populate compat_ioctl
  platform/chrome: cros_ec_lightbar - use name instead of ID to hide lightbar attributes
  platform/chrome: cros_ec_dev - Fix security issue
  platform/chrome: Add Chrome OS keyboard backlight LEDs support
  platform/chrome: use to_platform_device()
  platform/chrome: pstore: Move to larger record size.
  platform/chrome: pstore: probe for ramoops buffer using acpi
  platform/chrome: chromeos_laptop: Add Leon Touch

Pull more sound updates from Takashi Iwai:
 "This is the second update round for 4.7-rc1.  Most of changes are
  about the pending ASoC updates and fixes, including a few new drivers.
  Below are some highlights:

  ASoC:
   - New drivers for MAX98371 and TAS5720
   - SPI support for TLV320AIC32x4, along with the module split
   - TDM support for STI Uniperf IPs
   - Remaining topology API fixes / updates

  HDA:
   - A couple of Dell quirks and new Realtek codec support"

* tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: hda - Fix headset mic detection problem for one Dell machine
  spi: spi-ep93xx: Fix the PTR_ERR() argument
  ALSA: hda/realtek - Add support for ALC295/ALC3254
  ASoC: kirkwood: fix build failure
  ALSA: hda - Fix headphone noise on Dell XPS 13 9360
  ASoC: ak4642: Enable cache usage to fix crashes on resume
  ASoC: twl6040: Disconnect AUX output pads on digital mute
  ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers
  rcar: src: skip disabled-SRC nodes
  ASoC: max98371 Remove duplicate entry in max98371_reg
  ASoC: twl6040: Select LPPLL during standby
  ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS
  ASoC: simple-card: Add pm callbacks to platform driver
  ASoC: pxa: Fix module autoload for platform drivers
  ASoC: topology: Fix memory leak in widget creation
  ASoC: Add max98371 codec driver
  ASoC: rsnd: count .probe/.remove for rsnd_mod_call()
  ASoC: topology: Check size mismatch of ABI objects before parsing
  ASoC: topology: Check failure to create a widget
  ASoC: add support for TAS5720 digital amplifier
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "Here are the outstanding target pending updates for v4.7-rc1.

  The highlights this round include:

   - Allow external PR/ALUA metadata path be defined at runtime via top
     level configfs attribute (Lee)
   - Fix target session shutdown bug for ib_srpt multi-channel (hch)
   - Make TFO close_session() and shutdown_session() optional (hch)
   - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref
     (hch)
   - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence)
   - Refactor iscsi-target RX/TX PDU encode/decode into common code
     (Varun)
   - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu,
     validate_parameters, and get_r2t_ttt for generic ISO offload
     (Varun)
   - Initial merge of cxgb iscsi-segment offload target driver (Varun)

  The bulk of the changes are Chelsio's new driver, along with a number
  of iscsi-target common code improvements made by Varun + Co along the
  way"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits)
  iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
  cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute
  iscsi-target: Convert transport drivers to signal rdma_shutdown
  iscsi-target: Make iscsi_tpg_np driver show/store use generic code
  tcm_qla2xxx Add SCSI command jammer/discard capability
  iscsi-target: graceful disconnect on invalid mapping to iovec
  target: need_to_release is always false, remove redundant check and kfree
  target: remove sess_kref and ->shutdown_session
  iscsi-target: remove usage of ->shutdown_session
  tcm_qla2xxx: introduce a private sess_kref
  target: make close_session optional
  target: make ->shutdown_session optional
  target: remove acl_stop
  target: consolidate and fix session shutdown
  cxgbit: add files for cxgbit.ko
  iscsi-target: export symbols
  iscsi-target: call complete on conn_logout_comp
  iscsi-target: clear tx_thread_active
  iscsi-target: add new offload transport type
  iscsi-target: use conn_transport->transport_type in text rsp
  ...

Pull more rdma updates from Doug Ledford:
 "This is the second group of code for the 4.7 merge window.  It looks
  large, but only in one sense.  I'll get to that in a minute.  The list
  of changes here breaks down as follows:

   - Dynamic counter infrastructure in the IB drivers

     This is a sysfs based code to allow free form access to the
     hardware counters RDMA devices might support so drivers don't need
     to code this up repeatedly themselves

   - SendOnlyFullMember multicast support

   - IB router support

   - A couple misc fixes

   - The big item on the list: hfi1 driver updates, plus moving the hfi1
     driver out of staging

  There was a group of 15 patches in the hfi1 list that I thought I had
  in the first pull request but they weren't.  So that added to the
  length of the hfi1 section here.

  As far as these go, everything but the hfi1 is pretty straight
  forward.

  The hfi1 is, if you recall, the driver that Al had complaints about
  how it used the write/writev interfaces in an overloaded fashion.  The
  write portion of their interface behaved like the write handler in the
  IB stack proper and did bi-directional communications.  The writev
  interface, on the other hand, only accepts SDMA request structures.
  The completions for those structures are sent back via an entirely
  different event mechanism.

  With the security patch, we put security checks on the write
  interface, however, we also knew they would be going away soon.  Now,
  we've converted the write handler in the hfi1 driver to use ioctls
  from the IB reserved magic area for its bidirectional communications.
  With that change, Intel has addressed all of the items originally on
  their TODO when they went into staging (as well as many items added to
  the list later).

  As such, I moved them out, and since they were the last item in the
  staging/rdma directory, and I don't have immediate plans to use the
  staging area again, I removed the staging/rdma area.

  Because of the move out of staging, as well as a series of 5 patches
  in the hfi1 driver that removed code people thought should be done in
  a different way and was optional to begin with (a snoop debug
  interface, an eeprom driver for an eeprom connected directory to their
  hfi1 chip and not via an i2c bus, and a few other things like that),
  the line count, especially the removal count, is high"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits)
  staging/rdma: Remove the entire rdma subdirectory of staging
  IB/core: Make device counter infrastructure dynamic
  IB/hfi1: Fix pio map initialization
  IB/hfi1: Correct 8051 link parameter settings
  IB/hfi1: Update pkey table properly after link down or FM start
  IB/rdamvt: Fix rdmavt s_ack_queue sizing
  IB/rdmavt: Max atomic value should be a u8
  IB/hfi1: Fix hard lockup due to not using save/restore spin lock
  IB/hfi1: Add tracing support for send with invalidate opcode
  IB/hfi1, qib: Add ieth to the packet header definitions
  IB/hfi1: Move driver out of staging
  IB/hfi1: Do not free hfi1 cdev parent structure early
  IB/hfi1: Add trace message in user IOCTL handling
  IB/hfi1: Remove write(), use ioctl() for user cmds
  IB/hfi1: Add ioctl() interface for user commands
  IB/hfi1: Remove unused user command
  IB/hfi1: Remove snoop/diag interface
  IB/hfi1: Remove EPROM functionality from data device
  IB/hfi1: Remove UI char device
  IB/hfi1: Remove multiple device cdev
  ...

This reverts commit bff3c624.

Board "Leon" is otherwise known as "Toshiba CB35" and we already have
the entry that supports that board as of this commit :
963cb6fa platform/chrome: chromeos_laptop - Add Toshiba CB35 Touch

Remove this duplicate.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The call to put_i2c_dev() frees "i2c_dev" so there is a use after
free when we call cdev_del(&i2c_dev->cdev).

Fixes: d6760b14 ('i2c: dev: switch from register_chrdev to cdev API')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The corresponding FROZEN hotplug notifier transitions used on
suspend/resume are ignored. Therefore the switch case action argument
is masked with the frozen hotplug notifier transition mask.
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: rt@linutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/13351/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MicroMIPS kernels may be expected to run on microMIPS only cores which
don't support the normal MIPS instruction set, so be sure to pass the
-mmicromips flag through to the VDSO cflags.

Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/13349/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In microMIPS kernels, handle_signal() sets the isa16 mode bit in the
vdso address so that the sigreturn trampolines (which are offset from
the VDSO) get executed as microMIPS.

However commit ebb5e78c ("MIPS: Initial implementation of a VDSO")
changed the offsets to come from the VDSO image, which already have the
isa16 mode bit set correctly since they're extracted from the VDSO
shared library symbol table.

Drop the isa16 mode bit handling from handle_signal() to fix sigreturn
for cores which support both microMIPS and normal MIPS. This doesn't fix
microMIPS only cores, since the VDSO is still built for normal MIPS, but
thats a separate problem.

Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/13348/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>