fix #28612342

commit eeb2555779471abdbcc6289a52dc54ce513feaf2 upstream

When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.

This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.

Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit fb7be08f1a091ec243780bfdad4bf0c492057808 upstream

Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.
Suggested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

fix #28612342

commit e147133a42cb9df6cbc99503fdf58d0e6388bf2a upstream

ghes.c has a memory pool it uses for the estatus cache and the estatus
queue. The cache is initialised when registering the platform driver.
For the queue, an NMI-like notification has to grow/shrink the pool
as it is registered and unregistered.

This is all pretty noisy when adding new NMI-like notifications, it
would be better to replace this with a static pool size based on the
number of users.

As a precursor, move the call that creates the pool from ghes_init(),
into hest.c. Later this will take the number of ghes entries and
consolidate the queue allocations.
Remove ghes_estatus_pool_exit() as hest.c doesn't have anywhere to put
this.

The pool is now initialised as part of ACPI's subsys_initcall():
(acpi_init(), acpi_scan_init(), acpi_pci_root_init(), acpi_hest_init())
Before this patch it happened later as a GHES specific device_initcall().
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

commit 9a8d961f1ef835b0d338fbe13da03cb424e87ae5 upstream.

ACPICA commit a216e8ca9f7c79f90788b193e2e61151b2c973c0

This change reserves several field and renames subtable 0 to
"memory proximity domain attributes"

Link: https://github.com/acpica/acpica/commit/a216e8caSigned-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 29523f095397637edca60c627bc3e5c25a02c40f upstream

The Continuous Performance Control package may contain an optional
guaranteed performance field.

Add support to read guaranteed performance from _CPC.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 1757d05f3112acc5c0cdbcccad3afdee99655bf9 upstream

This patch add a helper to get the value of desired performance
register.
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: More white space ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

Commit b5eab512e7cffb2bb37c4b342b5594e9e75fd486 upstream.

ACPICA commit c736ea34add19a3a07e0e398711847cd6b95affd

Link: https://github.com/acpica/acpica/commit/c736ea34Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Version 20180810.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Increase the reference count limit to 0x4000 as the current one is
not sufficient for some large server systems.
Reviewed-by: NDimitri Sivanich <dimitri.sivanich@hpe.com>
Tested-by: NRuss Anderson <russ.anderson@hpe.com>
Reported-by: NMike Travis <mike.travis@hpe.com>
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
[ rjw: Changelog ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Macros to classify different AML exception codes have been added in
order to ignore the exceptions,
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
[ rjw: Fix damaged white space ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In order to remove the additional check before calling the
ghes_notify_sea(), make stub definition when !CONFIG_ACPI_APEI_SEA.

After this cleanup, we can simply call the ghes_notify_sea() to let
APEI driver handle the SEA notification.
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180629.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit bca5f557 "ACPI / processor: Make acpi_processor_ppc_has_changed()
void" changed one of the declarations of acpi_processor_ppc_has_changed()
to return void, but the !CPU_FREQ version still returns int. Let's return
void to be consistent.

Fixes: bca5f557 "ACPI / processor: Make acpi_processor_ppc_has_changed() void"
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Dell uses this string to activate Thunderbolt native mode on supported
machines.
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180531.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Debug level 0x00800000 will dump the current parse tree
just before it is deleted.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

PMCG nodes were added by IORT revision C, with the unfortunate oversight
that it only defined a single base address, and thus was incapable of
properly describing PMCG implementations with PMCG_CFGR.RELOC_CTRS = 1,
where the counters are in a separate page from the control registers.

Revision D corrects this by clarifying the existing field as the page 0
base address and adding a second field to describe the page 1 address
when implemented. With the spec now fit for purpose, let's support it.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

IORT revision D contains a few additions and fixes to
currently-supported tables:

- SMMUv3 proximity domain field is enlarged to 4 bytes for consistency
  with SRAT
- Root complex nodes gain an address size limit field equivalent to that
  of named components
- Named component nodes gain a way to describe PASID (substream_ID)
  support, encoded in their flags

Additionally, we fix a couple of outstanding points in passing:
- Add the stall support flag for named components defined in revision C
- Fix SMMUv3 HTTU override mask, which should always have been 2 bits
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Introduce acpi_dispatch_gpe() as a wrapper around acpi_ev_detect_gpe()
for checking if the given GPE (as represented by a GPE device handle
and a GPE number) is currently active and dispatching it (if that's
the case) outside of interrupt context.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180508.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180427.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace "\___" with actual descriptive text.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The use of the @ghes argument was removed in a previous commit, but
function signature was not updated to reflect this.
Signed-off-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: N"Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180430213358.8319-1-mr.nuke.me@gmail.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Provide a new lock type acpi_raw_spinlock which is implemented as
raw_spinlock_t on Linux. This type should be used in code which covers
small areas of code and disables interrupts only for short time even on
a realtime OS.
There is a fallback to spinlock_t if an OS does not provide an
implementation for acpi_raw_spinlock.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Tony reported seeing

  "Internal error: Can't find EDAC structure"

when injecting correctable errors due to the fact that ghes_edac would
still load even if the whitelist won't hit. Drop the pr_err() in
ghes_edac_report_mem_error() for now due to the hacky way how ghes_edac
depends on ghes.c.

While at it, make ghes_edac_register() return an error if it doesn't hit
in the whitelist as it is the only sensible thing to do in that
situation.

Furthermore, move the call to it to happen last in ghes_probe() so that
GHES initializing properly does not depend on ghes_edac init at all
as latter is only reporting errors and not required for GHES's proper
functioning.
Reviewed-by: NToshi Kani <toshi.kani@hpe.com>
Tested-by: NSughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20180420182015.zao3olss4tvvlxki@agluck-desk

CPPC V3 introduces two new entries to make it easier to convert between
abstract processor performance and frequency. The two new entries are
lowest frequency and nominal frequency. These are the frequencies
corresponding to lowest and nominal abstract performance.

Add support to read the new entries and populate them as part of the
CPPC performance capabilities which can be used by cpufreq drivers
Signed-off-by: NPrashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the ACPI scan has special handling for serial bus slaves, in that
it makes it the responsibility of the slave device's parent to enumerate
the device.

To support other types of slave devices which require the same special
handling but where the bus is not strictly a serial bus, such as devices on
the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to
acpi_device_enumeration_by_parent(), so that the name can fit the wider
purpose.

Also rename the associated device flag acpi_device_flags.serial_bus_slave
to .enumeration_by_parent.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and
changing only the acpi_id. For processors which P-state coordination type
is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information
(_PSD), because Xen will ignore any cpufreq domains created for past CPUs.

Albeit for platforms which expose coordination types as SW_ANY or SW_ALL,
this will have some unintended side effects. Effectively, it will look at
the P-state domain existence and *if it already exists* it will skip the
acpi-cpufreq initialization and thus inherit the policy from the first CPU
in the cpufreq domain. This will finally lead to the original cpu not
changing target freq to P0 other than the first in the domain. Which will
make turbo boost not getting enabled (e.g. for 'performance' governor) for
all cpus.

This patch fixes that, by also evaluating _PSD when we enumerate all ACPI
processors and thus always uploading the correct info to Xen. We export
acpi_processor_get_psd() for that this purpose, but change signature
to not assume an existent of acpi_processor given that ACPI isn't creating
an acpi_processor for non-dom0 CPUs.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Version 20180313.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This prepares the code for eventual removal of the original
style of deferred execution of the MLC.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Was acpi_gbl_parse_table_as_term_list, changed to:
acpi_gbl_execute_tables_as_methods.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Changes the option to ignore package resolution errors into
a runtime option.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

As the documentatuon above its declaration indicates, acpi_get_object_info()
is intended for early probe usage and as such should not call any methods
which may rely on op_regions, before this commit it was also calling _STA,
which on some systems does rely on op_regions.

Calling _STA before things are ready leads to errors such as these
(under Linux, on some hardware):

[    0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
               [generic_serial_bus] (20170831/evregion-166)
[    0.123601] ACPI Error: Region generic_serial_bus (ID=9) has no handler
               (20170831/exfldio-299)
[    0.123618] ACPI Error: Method parse/execution failed
               \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)

End 2015 support for the _SUB method was removed for exactly the same
reason. Removing current_status from struct acpi_device_info only has a limited
impact. Within ACPICA it is only used by 2 debug messages, both
of which are modified to no longer print it with this commit.

Outside of ACPICA, there was one user in Linux, which has been patched to
no longer use current_status in Torvald's current master.

I've not checked if free_BSD or others are using the current_status field.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After being enabled for the first time, the GPEs may have STS bits already
set. Setting EN bits is not sufficient to trigger the GPEs again, so this
patch polls GPEs after enabling them for the first time.
This is a cleaner version on top of the "GPE clear" fix generated according
to Mika's report and Rafael's original Linux based fix. Based on Linux
commit originated from Rafael J. Wysocki, fixed by Lv Zheng.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

EDAC driver needs to look up attributes of NVDIMMs provided in SMBIOS.

Provide a function that looks up an acpi_nfit_memory_map from a device
handle (node/socket/mc/channel/dimm) and returns the SMBIOS handle.
Also pass back the "flags" so we can see if the NVDIMM is OK.
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Erik Schmauss <erik.schmauss@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: devel@acpica.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-4-tony.luck@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

ACPICA commit 6e3468837f9f32f64c7d0a6e20bf0d2579411d43

Version 20180209.

Link: https://github.com/acpica/acpica/commit/6e346883Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a6c3c725c44dd44ad9d3f2b2a64351fdbe6e0014

For the kernel-resident ACPICA, optionally be silent about the
NOT_FOUND case. Although this is potentially a serious problem,
it can generate a lot of noise/errors on platforms whose
firmware carries around a bunch of unused Package objects.
To disable these errors, define ACPI_IGNORE_PACKAGE_RESOLUTION_ERRORS
in the OS-specific header.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198167
Link: https://github.com/acpica/acpica/commit/a6c3c725Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8faf6fca445eb7219963d80543fb802302a7a8c7

This change completes the integration of the recent changes to
package object handling with the module-level code support.

For acpi_exec, the -ep flag is removed.

This change allows table load to behave as if it were a method
invocation. Before this, the definition block definition below would
have loaded all named objects at the root scope. After loading, it
would execute the if statements at the root scope.

DefinitionBlock (...)
{
  Name(OBJ1, 0)

  if (1)
  {
    Device (DEV1)
    {
      Name (_HID,0x0)
    }
  }
  Scope (DEV1)
  {
    Name (OBJ2)
  }
}

The above code would load OBJ1 to the namespace, defer the execution
of the if statement and attempt to add OBJ2 within the scope of DEV1.
Since DEV1 is not in scope, this would incur an AE_NOT_FOUND error.
After this error is emitted, the if block is invoked and DEV1 and its
_HID is added to the namespace.

This commit changes the behavior to execute the if block in place
rather than deferring it until all tables are loaded. The new
behavior is as follows: insert OBJ1 in the namespace, invoke the if
statement and add DEV1 and its _HID to the namespace, add OBJ2 to the
scope of DEV1.

Bug report links:
Link: https://bugs.acpica.org/show_bug.cgi?id=963
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196165
Link: https://bugzilla.kernel.org/show_bug.cgi?id=192621
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197207
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198051
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515

ACPICA repo:
Link: https://github.com/acpica/acpica/commit/8faf6fcaTested-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a025731aec31745b775f7bdcd850c57d0a08298d

Split/restructure:
Table headers (actbl1*.h)
disassembler table info files (dmtbinfo*.c)
disassembler table dump files (dmtbdump*.c)

Adds 6 new files.

Link: https://github.com/acpica/acpica/commit/a025731aSigned-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>