ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see thunder_pem_ecam_ops) and custom configuration space
granulation (see bus_shift = 24). In order to access configuration space
and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. A new thunder_pem_acpi_init() init function to locate PEM-specific
   register ranges using ACPI.
2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk
   code.
3. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned thunder_pem_ecam_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

ThunderX pass 2.x requires the following accessors:

  NUMA Node 0 PCI segments  0- 3: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so
quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM]
Signed-off-by: NTomasz Nowicki <tn@semihalf.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Move the driver source and Kconfig to the PCI host bridge drivers directory
and move the config option to a more appropriate sub-menu instead of
occupying the top-level location.

Update the Kconfig option with the X86_64 dependency that was implicitly
included from the previous location, and add information about the module
name when built as a loadable module.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Jon Derrick <jonathan.derrick@intel.com>

Add support for the Rockchip PCIe controller found on RK3399 SoC platform.

[bhelgaas: fold in Brian's rockchip_pcie_client_irq_handler() OR fix, other
fixes and cleanups from Guenter Roeck <linux@roeck-us.net> and me,
uninitialized variable fix from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBrian Norris <briannorris@chromium.org>

The DesignWare PCIe driver requires MSI support, so we get a warning for
the artpec6 glue driver if that is not enabled:

  warning: (PCIE_ARTPEC6) selects PCIE_DW which has unmet direct dependencies (PCI && PCI_MSI_IRQ_DOMAIN)

Add the same dependency that all other such drivers have.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NNiklas Cassel <niklas.cassel@axis.com>

Add a driver for the Aardvark PCIe controller used on the Marvell Armada
3700 ARM64 SoC.

Based on work done by Hezi Shahmoon <hezi.shahmoon@marvell.com> and Marcin
Wojtas <mw@semihalf.com>.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The PCI_MSI symbol is used inconsistently throughout the tree, with some
drivers using 'select' and others using 'depends on', or using conditional
selects.  This keeps causing problems; the latest one is a result of
ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI
driver without enabling MSI:

  warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI)
  drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type
   static struct msi_domain_info alpine_msix_domain_info = {
		 ^~~~~~~~~~~~~~~
  drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer
    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
    ^
  drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
	     ^~~~~~~~~~~~~~~~~~~~~~~~

There is little reason to enable PCI support for a platform that uses MSI
but then leave MSI disabled at compile time.

Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges
that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN.

For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64,
X86), enable it by default whenever MSI is enabled.

[bhelgaas: changelog, omit crypto config change]
Suggested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

The Axis ARTPEC-6 SoC integrates a PCIe controller from Synopsys.  Add a
new driver that provides the small glue needed to use the existing
DesignWare driver to make it work on the Axis ARTPEC-6 SoC.

[bhelgaas: return errors directly without gotos, fold in section mismatch
fix]
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The generic PCI host controller calls of_irq_parse_and_map_pci() in its IRQ
fixup, but that function is only available when CONFIG_IRQ_DOMAIN is set:

  drivers/pci/built-in.o: In function `pci_host_common_probe':
  drivers/pci/host/pci-host-common.c:181: undefined reference to `of_irq_parse_and_map_pci'

There is no downside in enabling the domains here, so use a Kconfig
select statement to ensure it's always available to this driver.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Use functions provided by drivers/pci/ecam.h for mapping the config space
in drivers/pci/host/pci-host-common.c, and update its users to use 'struct
pci_config_window' and 'struct pci_ecam_ops'.

The changes are mostly to use 'struct pci_config_window' in place of
'struct gen_pci'.  Some of the fields of gen_pci were only used temporarily
and can be eliminated by using local variables or function arguments, these
are not carried over to struct pci_config_window.

pci-thunder-ecam.c and pci-thunder-pem.c are the only users of the
pci_host_common_probe function and the gen_pci structure; these have been
updated to use the new API as well.

The patch does not introduce any functional changes other than a very minor
one: with the new code, on 64-bit platforms, we do just a single ioremap
for the whole config space.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The R-Car PCIe driver requires the use of IRQ domains for its MSI code:

  drivers/pci/host/pcie-rcar.c:635:9: error: implicit declaration of function 'irq_find_mapping' [-Werror=implicit-function-declaration]
  drivers/pci/host/pcie-rcar.c:666:8: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
  ...

Add a Kconfig select to ensure that the feature is always enabled.

This is not consistent with what the other drivers do at the moment, but I
have another patch that changes them to do it like this one, which is more
logical.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

The Marvell Armada 7K/8K SoCs integrate a PCIe controller from Synopsys.
Add a new driver that provides the small glue needed to use the existing
Designware driver to make it work on Marvell Armada 7K/8K SoCs.

The MSI support will be enabled at a later point.

[bhelgaas: use dev_dbg(), dw_pcie_wait_for_link()]
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.

Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Revert 5c3b99d0 ("PCI: dra7xx: Mark driver as broken").

1c96bee4 ("ARM: DRA7: hwmod: Add custom reset handler for PCIeSS")
added support to de-assert PCIe reset, so DRA7x PCIe is not broken anymore.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add a reference platform driver for PCI RC IP Protoyping Kits based on the
ARC SDP.

[bhelgaas: changelog, split patch up, MAINTAINERS update]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root
complexes.  These root complexes (loosely referred to as ECAM units in the
hardware manuals) are used to access the Thunder on-chip devices.  They
are special in that all the BARs on devices behind these root complexes are
at fixed addresses.

Add a driver for these devices that synthesizes Enhanced Allocation (EA)
capability entries for each BAR.

Since this EA synthesis is needed for exactly two chip models, we can hard-
code some assumptions about the device topology and the layout of the
config space of specific DEVFNs in the driver.

[bhelgaas: changelog, whitespace]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>

The root complexes used to access off-chip PCIe devices (called PEM units
in the hardware manuals) on some Cavium ThunderX processors require quirky
access methods for the config space of the PCIe bridge.

Add a driver to provide these config space accessor functions.  Use the
pci-host-common code to configure the PCI machinery.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Move pci_host_common_probe() and associated functions to pci-host-common.c,
where it can be shared with other drivers.  Make it public (not static)
and update Kconfig and Makefile to build it.  No functional change
intended.

[bhelgaas: split into separate patch, changelog]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will.deacon@arm.com>

Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP.

[bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap
error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix]
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NRavi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <robh@kernel.org>

Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS.  The motivation is that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Modify the Microblaze PCI subsystem to work with the generic
drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.

[bhelgaas: changelog]
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NRavi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>

This driver uses PCI glue that is only available on 32-bit ARM.  This used
to work fine as long as ARCH_MVEBU and ARCH_DOVE were exclusively 32-bit,
but there's a patch in the pipe to make ARCH_MVEBU also available on 64-bit
ARM.

[bhelgaas: changelog; patch is coming but not merged yet]
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add support for the HiSilicon Hip06 SoC.  Documentation has been updated to
include Hip06.  Add Gabriele Paoloni as maintainer of the driver.
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>

Mark the dra7xx PCI host driver as broken.  This driver was first merged in
v3.17 and has never worked.  Although the driver compiles just fine, it is
missing an essential device reset.  If the driver is included, the kernel
locks up hard shortly after booting, before any console output appears.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based
platforms.

The iProc PCIe MSI support deploys an event queue-based implementation.
Each event queue is serviced by a GIC interrupt and can support up to 64
MSI vectors.  Host memory is allocated for the event queues, and each event
queue consists of 64 word-sized entries.  MSI data is written to the lower
16-bit of each entry, whereas the upper 16-bit of the entry is reserved for
the controller for internal processing.

Each event queue is tracked by a head pointer and tail pointer.  Head
pointer indicates the next entry in the event queue to be processed by
the driver and is updated by the driver after processing is done.
The controller uses the tail pointer as the next MSI data insertion
point.  The controller ensures MSI data is flushed to host memory before
updating the tail pointer and then triggering the interrupt.

MSI IRQ affinity is supported by evenly distributing the interrupts to each
CPU core.  MSI vector is moved from one GIC interrupt to another in order
to steer to the target CPU.

Therefore, the actual number of supported MSI vectors is:

  M * 64 / N

where M denotes the number of GIC interrupts (event queues), and N denotes
the number of CPU cores.

This iProc event queue-based MSI support should not be used with newer
platforms with integrated MSI support in the GIC (e.g., giv2m or
gicv3-its).

[bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NVikram Prakash <vikramp@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

The PCIe driver reuses the Designware common code for host and MSI
initialization, and also programs the Qualcomm application specific
registers.

[bhelgaas: remove COMPILE_TEST Kconfig dependency]
Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Now that we can build on arm64, revert commit 7c537c67
("PCI: rcar: Build pcie-rcar.c only on ARM").
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

PCIE_IPROC_BCMA does not require CONFIG_OF in Kconfig, but
CONFIG_PCIE_IPROC does, so we can get a warning when building for an ARM
platform without DT support:

  warning: (PCIE_IPROC_PLATFORM && PCIE_IPROC_BCMA) selects PCIE_IPROC which has unmet direct dependencies (PCI && OF && (ARM || ARM64))

It turns out that CONFIG_PCIE_IPROC never needs to be enabled by a user
anyway, we can simply rely on it being selected implictly through either
PCIE_IPROC_PLATFORM or PCIE_IPROC_BCMA.

Fixes: 4785ffbd ("PCI: iproc: Add BCMA PCIe driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>

Add Altera PCIe MSI driver.  This soft IP supports a configurable number of
vectors, which is a DTS parameter.

[bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <robh@kernel.org>

Add PCIe host support for HiSilicon SoC Hip05, related DT binding
documentation, and maintainer update.

[bhelgaas: changelog, 32-bit only config write warning text]
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Nliudongdong <liudongdong3@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)

Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have
similar PCIe implementation.  LUT is added to controller.

Add LS1043a and LS2080a support.

[bhelgaas: move unused field removal into separate patch, include DT update]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update)
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)

The pcie-rcar.c driver (controlled by PCI_RCAR_GEN2_PCIE) uses struct
pci_sys_data and pci_ioremap_io(), which only exist on ARM.  Building it on
other arches, e.g., arm64/shmobile, causes errors like this:

  drivers/pci/host/pcie-rcar.c:138:52: warning: 'struct pci_sys_data' declared inside parameter list
  drivers/pci/host/pcie-rcar.c:380:4: error: implicit declaration of function 'pci_ioremap_io' [-Werror=implicit-function-declaration]

Build pcie-rcar.c only on ARM.

[bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar]
Reported-by: Wolfram Sang <wsa@the-dreams.de> (pci_ioremap_io())
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The pci-rcar-gen2.c driver (controlled by PCI_RCAR_GEN2) uses struct
pci_sys_data, which only exists on ARM.  Building it on other arches, e.g.,
arm64/shmobile, causes errors like this:

  drivers/pci/host/pci-rcar-gen2.c: In function 'rcar_pci_cfg_base': drivers/pci/host/pci-rcar-gen2.c:112:34: error: dereferencing pointer to incomplete type
    struct rcar_pci_priv *priv = sys->private_data;
                                    ^

Build pci-rcar-gen2.c only on ARM.

[bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar]
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add the Altera PCIe host controller driver.

[bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI
dependency from Arnd]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)

Make pci-host-generic driver (kernel option PCI_HOST_GENERIC) available on
arm64.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Change CONFIG_PCIE_IPROC_BCMA to tristate to make it possible to build this
driver as a module.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRay Jui <rjui@broadcom.com>

The current iProc BCMA front-end driver can only work on ARM32 based
platforms; therefore its config option in Kconfig should be changed to
reflect that. This fixes arm64 allmodconfig build failure when compiling
the the iProc BCMA driver that contains struct pci_sys_data that is
arm32 specific
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Allow Broadcom iProc PCIe core driver to be compiled for ARM64
Signed-off-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NVikram Prakash <vikramp@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

APM X-Gene v1 SoC supports its own implementation of MSI, which is not
compliant to GIC V2M specification for MSI Termination.

There is a single MSI block in X-Gene v1 SOC which serves all 5 PCIe ports.
This MSI block supports 2048 MSI termination ports coalesced into 16
physical HW IRQ lines and shared across all 5 PCIe ports.

As there are only 16 HW IRQs to serve 2048 MSI vectors, to support
set_affinity correctly for each MSI vectors, the 16 HW IRQs are statically
allocated to 8 X-Gene v1 cores (2 HW IRQs for each cores).  To steer MSI
interrupt to target CPU, MSI vector is moved around these HW IRQs lines.
With this approach, the total MSI vectors this driver supports is reduced
to 256.

[bhelgaas: squash doc, driver, maintainer update]
Signed-off-by: NDuc Dang <dhdang@apm.com>
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

This driver adds support for the PCIe 2.0 controller found on the BCMA bus.
This controller can be found on (mostly) all Broadcom BCM470X / BCM5301X
ARM SoCs.

The driver found in the Broadcom SDK does some more stuff, like setting up
some DMA memory areas, chaining MPS and MRRS to 512 and also some PHY
changes like "improving" the PCIe jitter and doing some special
initialization for the 3rd PCIe port.

This was tested on a bcm4708 board with 2 PCIe ports and wireless cards
connected to them.

PCI_DOMAINS is needed by this driver, because normally there is more than
one PCIe controller and without PCI_DOMAINS only the first controller gets
registered.  This controller gets 6 IRQs; the last one is trigged by all
IRQ events.

[bhelgaas: fix "GPLv2" MODULE_LICENSE typo]
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NRay Jui <rjui@broadcom.com.com>

Add support for the Broadcom iProc PCIe controller.

pcie-iproc.c is the common core driver, and a front-end bus interface needs
to be added to support different bus interfaces.

pcie-iproc-platform.c contains the support for the platform bus interface.
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>