All entities implement the same get pad format handler, factorize it
into a common function.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The RPF entities are located at the very beginning of pipelines, they
can't be target nodes in the Data Path Router matrix. Remove their input
ID from the routing table.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of embedding pipelines in the vsp1_video objects allocate them
on demand when they are needed. This fixes the streamon race condition
where pipelines objects from different video nodes could be used for the
same pipeline.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move the pipeline initialization and cleanup functions to prepare for
the next commit. No functional code change is performed here.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This prepares for dynamic pipeline allocation by providing a field that
can be used to store the pipeline pointer atomically under driver
control.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Pass the pipe explicitly instead of retrieving it through media
entities. This decouples device state stored in the pipeline from the
active state stored in entities, preparing for dynamic pipeline
creation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The primary purpose of those functions is to build the pipeline, rename
them to make this clearer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Modules write register values to the active display list pointed to by
the pipeline. In order to support preparing display lists ahead of time,
pass them explicitly to all configuration functions.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Reuse the runtime logic to initialize the default format instead of
open-coding it. This ensures coherency between intialization and
runtime.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The two structures are identical, merge them and move the result to
vsp1_rwpf.c. All rwpf pad operations can now be declared static.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The subdev s_stream operation is abused as a generic way to setup
modules at every frame. Move the code out to a new VSP1 entity configure
operation.

Most modules now have an empty s_stream operation that can be removed.
The only exception is the WPF module that needs to perform hardware
configuration when stopping the stream. The code can be simplified
accordingly as we know that that operation never fails.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the pad config structure part of the vsp1_entity to store all active
pad selection rectangles. This generalizes the code to operate on pad
config structures.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a pad config structure field to the vsp1_entity structure and use it
to store all active pad formats. This generalizes the code to operate on
pad config structures.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Turn the custom formats initialization function into a standard
pad::init_cfg handler and use it in subdevs instead of initializing
formats in the subdev open handler.

This makes the subdev open handler empty, so remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix a typo that stored the try compose rectangle in the crop rectangle.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Entities have two operations, a destroy operation stored directly in
vsp1_entity and a set_memory operation stored in a vsp1_rwpf_operations
structure. Move the two to a more generic vsp1_entity_operations
structure that will serve to implement additional operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Don't duplicate the code in every module driver, centralize it in a
single place.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Don't restrict display list usage to the DRM pipeline, use them
unconditionally. This prepares the driver to support the request API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Display lists can operate in header or headerless mode. The headerless
mode is only available on WPF0, to be used with the display engine. All
other WPF instances can only use display lists in header mode.

Implement support for header mode to prepare for display list usage on
WPFs other than 0.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit f7234138 ("v4l2-subdev: replace v4l2_subdev_fh by
v4l2_subdev_pad_config") introduced lots of 80 characters per line
violations. Fix them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The function can only be called from a s_stream handler as it requires a
valid display list context (due to calling vsp1_uds_set_alpha() which
writes to module registers). Document the requirement.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The flag is set but never read, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The RPF source memory pointers need to be offset to take the crop
rectangle into account. Offsets are computed in the RPF stream start,
which can happen (when using the DRM pipeline) after calling the RPF
.set_memory() operation that programs the buffer addresses.

The .set_memory() operation tries to guard against the problem by
skipping programming of the registers when the module isn't streaming.
This will however only protect the first use of an RPF in a DRM
pipeline, as in all subsequent uses the module streaming flag will be
set and the .set_memory() operation will use potentially incorrect
offsets.

Fix this by allowing the caller to decide whether to program the
hardware immediately or just cache the addresses. While at it refactor
the memory set code and create a new vsp1_rwpf_set_memory() that cache
addresses and calls the .set_memory() operation to apply them to the
hardware.

As a side effect the driver now writes all three DMA address registers
regardless of the number of planes, and initializes unused addresses to
zero.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Those modules were left out of display list integration as they're not
used by the DRM pipeline. To prepare for display list support in non-DRM
pipelines use the module write API to set registers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The control handler set operations don't program the hardware anymore,
there's thus no need to call them when starting the stream.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the intensity
parameters in the control set handler is thus prohibited. Program it
when starting the module instead.

This requires storing the intensity value internally as the module can
be started from the frame completion interrupt handler, and accessing
control values requires taking a mutex.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the alpha value in
the control set handler is thus prohibited. Program it when starting the
module instead.

This requires storing the alpha value internally as the module can be
started from the frame completion interrupt handler, and accessing
control values requires taking a mutex.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
	drivers/media/platform/vsp1/vsp1_drm.c:39:6: warning: no previous prototype for 'vsp1_drm_frame_end' [-Wmissing-prototypes]
	 void vsp1_drm_frame_end(struct vsp1_pipeline *pipe)

Fixes: ef9621bc ("[media] v4l: vsp1: Store the display list manager in the WPF")
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the background color
in the control set handler is thus prohibited. Program it when starting
the module instead.

This requires storing the background color value internally as the
module can be started from the frame completion interrupt handler, and
accessing control values requires taking a mutex.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Each WPF can process display lists independently, move the manager to
the WPF to reflect that and prepare for display list support for non-DRM
pipelines.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This clarifies the API and prepares display list support for being used
to implement the request API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The DRM pipeline, as it runs in automatic restart mode, never sees the
pipeline state set to VSP1_PIPELINE_STOPPING or VSP1_PIPELINE_STOPPED
when running the frame end interrupt handler. We can thus skip the
checks various checks in the handler and return immediately.

Similarly the DRM frame end handler calls vsp1_pipeline_run()
unnecessarily, as the state there is never VSP1_PIPELINE_STOPPED. Remove
the function call and the frame end handler is it's now empty.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make sure display list usage is correctly disabled by always setting up
the corresponding registers, including when the display list feature
isn't used.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This allows getting rid of the vsp1_device::use_dl field.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove the HAS_LUT flag in the corresponding device information entry.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit 54b5a749 ("[media] v4l: vsp1: Use media entity enumeration
interface") wasn't aligned with the driver coding style. Fix it by
renaming the rval variable to ret.

Furthermore shorten lines by accessing the media_device instance in a
more straightforward fashion.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The VSP1 DRM API is declared in <media/vsp1.h>, not <linux/vsp1.h>. Fix
it. This also reverts commit 18922936 ("[media] vsp1_drm.h: add
missing prototypes") that added the same declarations in a different
header file.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

I noticed this while merging the drm tree and checking for stragglers:
the vsp1 driver still used dma_[alloc|free]_writecombine() that got
renamed in commit f6e45661 ("dma, mm/pat: Rename
dma_*_writecombine() to dma_*_wc()")

I should have noticed back in the media merge (commit bace3db5), but
better late than never.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use is_media_entity_v4l2_subdev() instead of is_media_entity_v4l2_io()
to check whether the entity is a subdev.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>