提交 3f557220 编写于 作者: L Laurent Pinchart 提交者: Mauro Carvalho Chehab

[media] v4l: vsp1: Factorize get pad format code

All entities implement the same get pad format handler, factorize it
into a common function.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
上级 5b22a11e
......@@ -129,23 +129,6 @@ static struct v4l2_rect *bru_get_compose(struct vsp1_bru *bru,
return v4l2_subdev_get_try_compose(&bru->entity.subdev, cfg, pad);
}
static int bru_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_bru *bru = to_bru(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&bru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&bru->entity, config,
fmt->pad);
return 0;
}
static void bru_try_format(struct vsp1_bru *bru,
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
......@@ -292,7 +275,7 @@ static struct v4l2_subdev_pad_ops bru_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = bru_enum_mbus_code,
.enum_frame_size = bru_enum_frame_size,
.get_fmt = bru_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = bru_set_format,
.get_selection = bru_get_selection,
.set_selection = bru_set_selection,
......
......@@ -116,6 +116,31 @@ int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
return 0;
}
/*
* vsp1_subdev_get_pad_format - Subdev pad get_fmt handler
* @subdev: V4L2 subdevice
* @cfg: V4L2 subdev pad configuration
* @fmt: V4L2 subdev format
*
* This function implements the subdev get_fmt pad operation. It can be used as
* a direct drop-in for the operation handler.
*/
int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_entity *entity = to_vsp1_entity(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(entity, config, fmt->pad);
return 0;
}
/* -----------------------------------------------------------------------------
* Media Operations
*/
......
......@@ -127,4 +127,8 @@ int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
void vsp1_entity_route_setup(struct vsp1_entity *source,
struct vsp1_dl_list *dl);
int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt);
#endif /* __VSP1_ENTITY_H__ */
......@@ -90,23 +90,6 @@ static int hsit_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int hsit_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_hsit *hsit = to_hsit(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&hsit->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&hsit->entity, config,
fmt->pad);
return 0;
}
static int hsit_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
......@@ -154,7 +137,7 @@ static struct v4l2_subdev_pad_ops hsit_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = hsit_enum_mbus_code,
.enum_frame_size = hsit_enum_frame_size,
.get_fmt = hsit_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = hsit_set_format,
};
......
......@@ -107,23 +107,6 @@ static int lif_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int lif_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lif *lif = to_lif(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&lif->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&lif->entity, config,
fmt->pad);
return 0;
}
static int lif_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
......@@ -173,7 +156,7 @@ static struct v4l2_subdev_pad_ops lif_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = lif_enum_mbus_code,
.enum_frame_size = lif_enum_frame_size,
.get_fmt = lif_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = lif_set_format,
};
......
......@@ -136,23 +136,6 @@ static int lut_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int lut_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lut *lut = to_lut(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&lut->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&lut->entity, config,
fmt->pad);
return 0;
}
static int lut_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
......@@ -208,7 +191,7 @@ static struct v4l2_subdev_pad_ops lut_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = lut_enum_mbus_code,
.enum_frame_size = lut_enum_frame_size,
.get_fmt = lut_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = lut_set_format,
};
......
......@@ -83,23 +83,6 @@ static int vsp1_rwpf_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int vsp1_rwpf_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&rwpf->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&rwpf->entity, config,
fmt->pad);
return 0;
}
static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
......@@ -254,7 +237,7 @@ const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = vsp1_rwpf_enum_mbus_code,
.enum_frame_size = vsp1_rwpf_enum_frame_size,
.get_fmt = vsp1_rwpf_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = vsp1_rwpf_set_format,
.get_selection = vsp1_rwpf_get_selection,
.set_selection = vsp1_rwpf_set_selection,
......
......@@ -184,23 +184,6 @@ static int sru_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int sru_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_sru *sru = to_sru(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&sru->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&sru->entity, config,
fmt->pad);
return 0;
}
static void sru_try_format(struct vsp1_sru *sru,
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
......@@ -285,7 +268,7 @@ static struct v4l2_subdev_pad_ops sru_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = sru_enum_mbus_code,
.enum_frame_size = sru_enum_frame_size,
.get_fmt = sru_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = sru_set_format,
};
......
......@@ -182,23 +182,6 @@ static int uds_enum_frame_size(struct v4l2_subdev *subdev,
return 0;
}
static int uds_get_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_uds *uds = to_uds(subdev);
struct v4l2_subdev_pad_config *config;
config = vsp1_entity_get_pad_config(&uds->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
fmt->format = *vsp1_entity_get_pad_format(&uds->entity, config,
fmt->pad);
return 0;
}
static void uds_try_format(struct vsp1_uds *uds,
struct v4l2_subdev_pad_config *config,
unsigned int pad, struct v4l2_mbus_framefmt *fmt)
......@@ -272,7 +255,7 @@ static struct v4l2_subdev_pad_ops uds_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = uds_enum_mbus_code,
.enum_frame_size = uds_enum_frame_size,
.get_fmt = uds_get_format,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = uds_set_format,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册