- 03 5月, 2008 40 次提交
-
-
由 H. Peter Anvin 提交于
This modifies <asm-powerpc/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-parisc/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-mn10300/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
-
由 H. Peter Anvin 提交于
This modifies <asm-mips/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-m68k/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-m32r/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Hirokazu Takata <takata@linux-m32r.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-ia64/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NTony Luck <tony.luck@intel.com>
-
由 H. Peter Anvin 提交于
This modifies <asm-h8300/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
-
由 H. Peter Anvin 提交于
This modifies <asm-frv/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Howells <dhowells@redhat.com>
-
由 H. Peter Anvin 提交于
This modifies <asm-cris/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com>
-
由 H. Peter Anvin 提交于
This modifies <asm-blackfin/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Bryan Wu <cooloney@kernel.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-avr32/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
由 H. Peter Anvin 提交于
This modifies <asm-arm/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org>
-
由 H. Peter Anvin 提交于
This modifies <asm-alpha/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-
由 H. Peter Anvin 提交于
This creates two generic files with common integer definitions; one where 64 bits is "long" (most 64-bit architectures) and one where 64 bits is "long long" (all 32-bit architectures and x86-64.) Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Anton Blanchard <anton@samba.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: William L. Irwin <wli@holomorphy.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] fix sysctl_nr_open bugs [PATCH] sanitize anon_inode_getfd() [PATCH] split linux/file.h [PATCH] make osf_select() use core_sys_select() [PATCH] remove horrors with irix tty ioctls handling [PATCH] fix file and descriptor handling in perfmon
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits) USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance, clear-feature ignore USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance usb_serial: some coding style fixes USB: Remove redundant dependencies on USB_ATM. USB: UHCI: disable remote wakeup when it's not needed USB: OHCI: work around bogus compiler warning USB: add Cypress c67x00 OTG controller HCD driver USB: add Cypress c67x00 OTG controller core driver USB: add Cypress c67x00 low level interface code USB: airprime: unlock mutex instead of trying to lock it again USB: storage: Update mailling list address USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame. USB: Add the USB 2.0 extension descriptor. USB: add more FTDI device ids USB: fix cannot work usb storage when using ohci-sm501 usb: gadget zero timer init fix usb: gadget zero style fixups (mostly whitespace) usb serial gadget: CDC ACM fixes usb: pxa27x_udc driver USB: INTOVA Pixtreme camera mass storage device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: driver-core: add dev_name() to help transition away from using bus_id
-
由 David Lopo 提交于
Gadget tells controller driver to ignore Clear-Feature(HALT_ENDPOINT) Signed-off-by: NDavid Lopo <lopo.david@gmail.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu>
-
由 David Lopo 提交于
Gadget can tell controller driver to ignore Clear-Feature(HALT_ENDPOINT) This API change enables future support for Bulk-Only Transport compliance Signed-off-by: NDavid Lopo <lopo.david@gmail.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert P. J. Day 提交于
Given that the bulk of the Kconfig file is enclosed in "if USB_ATM", remove the unnecessary dependencies. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
The patch (as1086) works around a bogus "uninitialized variable" warning generated by some versions of GCC. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
This patch add the core driver for the c67x00 USB OTG controller. The core driver is responsible for the platform bus binding and creating either USB HCD or USB Gadget instances for each of the serial interface engines on the chip. This driver does not directly implement the HCD or gadget behaviours; it just controls access to the chip. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
This patch adds the low level support code for the Cypress c67x00 family of OTG controllers. The low level code is responsible for register access and implements the software protocol for communicating with the 16bit microcontroller inside the c67x00 device. Communication is done over the HPI interface (16bit SRAM-like parallel bus). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Leonardo Chiquitto 提交于
The following patch fixes a [probable] copy & paste mistake in airprime.c. Instead of unlocking an acquired mutex, the actual code tries to lock it again. Signed-off-by: NLeonardo Chiquitto <lchiquitto@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Lunn 提交于
drivers/usb/storage/unusual_devs.h lists the address linux-usb-devel@lists.sourceforge.net for patches to that file. This address results in a bounce and a pointer to vger. This patch updates the address in the header file. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
This device descriptor was added by the recent USB Link Power Management (LPM) ECN. It indicates whether the USB device supports LPM. This descriptor is grouped under a Binary Device Object Store (BOS) descriptor. Update the BOS comments to indicate any USB device (not just wireless USB devices) can implement BOS descriptors. Signed-off-by: NSarah Sharp <sarah.a.sharp@intel.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Mack 提交于
Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
When I used ohci-sm501, hcd_alloc_coherent() in map_urb_for_dma() is not called, because usb_sg_init() always sets URB_NO_TRANSFER_DMA_MAP. dmesg (CONFIG_USB_STORAGE_DEBUG enabled): usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries usb-storage: Status code -75; transferred 0/36 usb-storage: -- babble usb-storage: Bulk data transfer result 0x3 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x2 Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Lopo 提交于
Initialize timer earlier so if an error occurs allocating USB request or buffer request (zero_bind) Gadget Zero will not hang trying to delete an uninitialized timer (zero_unbind). Signed-off-by: NDavid Lopo <lopo.david@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Minor updates to "Gadget Zero". - Primarily these are whitespace updates to address the fact that since this was written, Documentation/CodingStyle was changed to disapprove of parts of the original coding style. - Update a few comments that weren't quite correct, notably mentioning the "autoresume" module parameter. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Based on a patch from <Aurel.Thomi@ruag.com>, this makes the CDC-ACM support in the serial gadget handle the SET_LINE_CODING and SET_CONTROL_LINE_STATE requests ... which should improve interop with at least MS-Windows "usbser.sys" if not some other ACM host drivers. It also adds a few REVISIT comments where this code plays a bit loose with the CDC ACM spec. If this were used to hook up to a real RS232 or modem link, those places would need a bit of work. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert Jarzmik 提交于
Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: NRobert Jarzmik <rjarzmik@free.fr> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rohan Hart 提交于
FIX_CAPACITY is all that's needed. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roel Kluin 提交于
The test for an mos7840_set_uart_reg() error return value only works when status is signed. propagate its error value. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Cc: SL Baur <steve@xemacs.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Minor cleanup to the "usbtest" driver, mostly to resolve a regression: all the important diagnostics were at KERN_DEBUG, so that when the "#define DEBUG" was removed from the top of that file it stopped providing diagnostics. Fix by using KERN_ERROR. Also: - Stop using the legacy dbg() calls - Simplify the internal debug macros - Correct some test descriptions: * Test #10 subcase 7 should *always* stall * Test #10 subcase 8 *may* stall - Diagnostic about control queue test failures is more informative - Fix some whitespace "bugs" And add a warning about the rude interaction between usbfs ioctl() and khubd during device disconnect ... don't unplug a device under test, that will wedge. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-