- 26 1月, 2008 8 次提交
-
-
由 Patrick Boettcher 提交于
Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Olivier DANET 提交于
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET <odanet at caramail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Darren Salt 提交于
Here's a roll-up which provides support for both this and the myTV.t. Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tim Taubert 提交于
Add support for WinTV Nova-T-CE driver Signed-off-by: NTim Taubert <ttmails@gmx.de> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Daniel Gimpelevich 提交于
Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Yousef Lamlum 提交于
Added Artec T14BR support Signed-off-by: NYousef Lamlum <yousef@youseflamlum.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 dominik 提交于
Signed-off-by: Ndominik <dominik95@free.fr> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jaroslav Barton 提交于
Add remote controller support for Leadtek Winfast DTV Dongle based on DiB7700P, MT2060 and using last drivers (6040:6a79c243aecc), firmware dvb-usb-dib0700-03-pre1.fw Signed-off-by: NJaroslav Barton <djaara@djaara.net> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 10月, 2007 1 次提交
-
-
由 Patrick Boettcher 提交于
As for most of the users the 1.10 firmware is an improvement we should use this firmware always now. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 13 次提交
-
-
由 Joachim Steiger 提交于
add Avermedia dvb-t express card 34 (usb2) id Signed-off-by: NJoachim Steiger <roh@hyte.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Darren Salt 提交于
Working with Nova-T Stick (70001) with remote control model A415. Untested with other dib0700m/dib0700p devices. Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Darren Salt 提交于
Typo fix in Nova-TD description Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Janne Grunau 提交于
The new firmware returns the data of the REQUEST_POLL_RC request in reversed order. The default is RC5, but it can be adjusted using a module parameter. Signed-off-by: NJanne Grunau <janne-dvb@grunau.be> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Janne Grunau 提交于
line-breaks in dib0700-remote-query function fixed. Signed-off-by: NJanne Grunau <janne-dvb@grunau.be> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Forgot to initialize the timf_default field. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Fix for size of remote control keys in DiB0700. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Add support Compro VideoMate 500 with DiB7000PC. Another design of Compro uses the DiB7000PC and it has new USB ids. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Janne Grunau 提交于
Copied from drivers/media/dvb/dvb-usb/nova-t-usb2.c Signed-off-by: NJanne Grunau <janne-dvb@grunau.be> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Janne Grunau 提交于
This patch adds remote control support for the Hauppauge Nova-T 500 using the same keys as for STK7700PD. Signed-off-by: NJanne Grunau <janne-dvb@grunau.be> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by: NJean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
This changesets syncs the OpenSource driver for DiBcom demodulators with version 2.1.3 of DiBcom reference driver. There were some improvements since the last release for linux-dvb, e.g.: - stepped AGC startup - less space for initialization - diversity synchronization Furthermore this changeset contains the following things: - latest AGC settings for MT2266-based devices (namely Nova-TD and other) will improve the sensitivity - support for STK7700D reference design in dib0700-devices - remove some line-breaks when debugging is enabled - getting rid of layer between frontend_parameters and ofdm_channel used in dib*-drivers Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Olivier DANET 提交于
Add initial support for Dual-DVB-T stick based on DiB7700 and MT2266 - Microtune MT2266 driver. - Preliminary support for these dual tuner devices : - Pinnacle Dual DVB-T diversity - Terratec Cinergy DT USB XS diversity - Hauppauge Nova TD USB Signed-off-by: NOlivier DANET <odanet@caramail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 28 4月, 2007 2 次提交
-
-
由 Dennis Ranke 提交于
When trying to use a Hauppauge Nova-T Stick on a big-endian architecture (such as powerpc) no frontend can be attached. The attached patch fixes this problem by removing two lines in dib0700_ctrl_rd() that try to correct the endianess on two values that already are correct: - /* think about swapping here */ - value = le16_to_cpu(value); - index = le16_to_cpu(index); With this simple patch this dvb hardware works great, thanks to anyone involved for the good work. :) Signed-off-by: NDennis Ranke <mail@exoticorn.de> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Christophe Cattelain 提交于
Added USB_PID_PCTV_450E to the 'usb_device_id ttusb2_table' and an entry in the .devices table. The 400e driver now supports the 'Pinnacle PCTV Sat Pro USB (450e)' with USB_ID 2304:0222. Signed-off-by: NChristophe Cattelain <xof@skynet.be> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 12月, 2006 9 次提交
-
-
由 Jose Carlos Garcia Sogo 提交于
Add alternative device ID (0xb808) for AverMedia AverTV Volar dongles. Signed-off-by: NJose Carlos Garcia Sogo <jsogo@debian.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Stefan Traby 提交于
Added support for Nova-T Stick with USB-pid: 0x7060 Signed-off-by: NStefan Traby <stefan@hello-penguin.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch adds support for the new, STK7700-based revision of the Leadtek Winfast DTV Dongle. Signed-off-by: NMichal CIJOML Semler <cijoml@volny.cz> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Forgot to increase the device count for the STK7700P-devices Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Henning Schroeer 提交于
Adding USB IDs for Uniwill STK7700P-ref-design Signed-off-by: NHenning Schroeer <post@henning-schroeder.de> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tomi Koivulahti 提交于
This patch adds Compro Videomate U500 to supported devices. Signed-off-by: NTomi Koivulahti <birchbay@gmail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
This patch contains support for the DiB7000PC-driver. Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
First working version of the dib7000m-driver. This commit also makes the Hauppauge NOVA-T Stick working. Signed-off-by: NFrancois Kanounnikoff <fkanounnikoff@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Initial commit for the driver for the DiB7000M COFDM demodulator. Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 10月, 2006 7 次提交
-
-
由 Patrick Boettcher 提交于
Removed compilation warnings for unused statics and locals Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Added a module parameter for force the activation of any LNA on a board. Suggest by Steve Toth. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Removing include for kernel 2.6.19 Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
- forward the clock to the slave undivided - when sleeping the 3000 do not shutdown the clock Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
- make the timing frequency update work. - fix AGC calibration for Nova-T 500 Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Adding another USB product ID for the Nova-T 500. Reported by Jose Alberto Reguero. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T). It adds correct AGC setting for the 3000P, correct firmware download state detection. Additionally it fixes the mt2060-driver to be able to be used with dvb_attach. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-