Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users.  It
sets the MT2060 IF1 frequency according to the calibration values
stored in the EEPROM.

It is supposed to enhance the signal quality, but, hey, there is no
guarantee.  Feedbacks would be much appreciated, to know whether it
deserves being applied.

Signed-off-by: Olivier DANET <odanet at caramail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The attached patch solves all my vdr tuning problems on a dib7000p
nova-t stick as far as I could check within the last weekend.

It disables streaming while tuning, like that the number of faulty TS
packets is reduced.
Signed-off-by: NSoeren Moch <Soeren.Moch@stud.uni-hannover.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Here's a roll-up which provides support for both this and the myTV.t.
Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for WinTV Nova-T-CE driver
Signed-off-by: NTim Taubert <ttmails@gmx.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch fix autoserach in the Hauppauge NOVA-T 500.
Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adding support for ASUS My Cinema U3000 Mini DVBT Tuner
Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added Artec T14BR support
Signed-off-by: NYousef Lamlum <yousef@youseflamlum.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

xc5000: Fix OOPS caused by missing firmware.
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Acked-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- avoid poss. locking when doing copy_to_user which may sleep
- RDS is automatically activated on read now
- code cleaned of unnecessary rds_commands
- USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified
  (thanks to Guillaume RAMOUSSE)
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- code reordered to avoid function prototypes
- switch/case defaults are now more user-friendly
- unified comment style
- applied all checkpatch.pl v1.12 suggestions
  except the warning about the too long lines with bit comments
- renamed FMRADIO to RADIO to cut line length (checkpatch.pl)
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.

Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.

Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.

Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Previous patches assume the tuner was on a different gpio. This patch
corrects this.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

IR corrections for the Pinnacle 800i
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

We already know that the XC5000 tuner can only be located at
i2c address 0x61, 0x62, 0x63 or 0x64

We shouldn't display this warning if the XC5000 tuner is present.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Change TDA9887 to tda9887.

TDA8290 shall reflect the actual hardware present in its name,
  ie:

tda8295+18271
tda8290+8275a
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Marcos Melero (marcosmelero at gmail.com) reported he could make
his dvb-t usb stick work with the af9005 driver by changing the device
ids (10b9:6000).

The stick is branded "Ansonic" (one of the brands of a spanish chain of
supermarkets) with no other identification of the model.
Since neither Marcos nor me know the OEM for the stick, in the attached
patch I used Ansonic for the ids/description.
Signed-off-by: NLuca Olivetti <luca@ventoso.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Call analog_ops.standby during tda18271_set_params, to put the tda8295
in tri-state when tuning digital channels.  Otherwise the tda8295 will
interfere with the signal coming from the tda18271 into the digital
demodulator.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

state is already NULL.
Reviewed-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Correctly set the atatch structures, enable IR, configure the
xc5000 tuner includes.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

xc5000: Small amount of cleanup and commenting, just for clarification.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

From Zhang: This patch fixes support for the HVR1500Q which was broken
when the xc5000 analog patch was added.

Patch committed as-is, cleanups to follows .... Steve
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

From Zhang: This patch continues the support for the Pinnacle HD 800i.

Patch committed as-is, cleanups to follow ... Steve
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

From Zhang: This an updated patch that adds analog support for
the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i
card (patches to follow).

Patch commited as-is, cleanup to follow ... Steve.
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Parallel support was not working with the s5h1409 and the Pinnacle HD800i.
This patch fixes the demodulator driver and ensures that all existing
s5h1409 based products configure the demodulator correctly.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The backports weren't tested, but compile fine.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It
should also work for the identical ADS/Tech FM Radio Receiver (formerly
Instant FM Music) as soon as I find out the USB Vendor and Product ID.

The driver is inspired by several other USB and radio drivers, but mainly from
the D-Link DSB-R100 USB radio (dsbr100.c).

The USB stick currently has an Si4701 FM RDS radio receiver. But the other
Si470x devices are pin and register compatible, so that in the future the
driver can easily be patched to support these too. Therefore I named the
driver radio-si470x and the configuration option usb-si470x.

The driver itself just provides the control function over the radio. For
getting audio back, the device support the USB audio class, which is
implemented in the already existing driver.

I tested the driver in the last days, until it now satisfies all my
functionality and robustness requirements. The application I used for testing
was kradio.
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NZoltan Devai <zdevai@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The file drivers/media/video/videodev.c defines both video_device_alloc and
video_device_release.  These are essentially just kzmalloc and kfree,
respectively, but it seems better to use video_device_release, as done in
the other media files, rather than kfree, in case the implementation some
day changes.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2,x3;
int ret;
@@

  T E;
  ...
* E = video_device_alloc(...);
  if (E == NULL) S
  ... when != video_device_release(...,(T1)E,...)
      when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...}
      when != x1 = (T1)E
      when != E = x3;
      when any
  if (...) {
    ... when != video_device_release(...,(T2)E,...)
        when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...}
        when != x2 = (T2)E
(
*   return;
|
*   return ret;
)
  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Video_device_alloc returns the result of a kzalloc.  In this case, the
value is stored in a local variable which is not copied elsewhere before
the point of the error return (video_register_device does not save its
first argument anywhere if it returns a negative value).  Thus, a
video_device_release it needed before the error return.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2,x3;
int ret;
@@

  T E;
  ...
* E = video_device_alloc(...);
  if (E == NULL) S
  ... when != video_device_release(...,(T1)E,...)
      when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...}
      when != x1 = (T1)E
      when != E = x3;
      when any
  if (...) {
    ... when != video_device_release(...,(T2)E,...)
        when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...}
        when != x2 = (T2)E
(
*   return;
|
*   return ret;
)
  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
CC: Oliver Endriss <o.endriss@gmx.de>
CC: Michael Hunold <michael@mihu.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This module option variable is only handled within the file tda18271-fe.c -

Declare this variable as static.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

VIDEO_PVRUSB2 must select:
VIDEO_SAA711X, VIDEO_CX25840, VIDEO_MSP3400, and VIDEO_WM8775
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration
sequence will be invoked on startup.  Otherwise, the calibration will take
place during the first tune.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Test RF_CAL_OK to see if we need to perform the RF tracking filter
calibration after returning from standby.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add function, tda18271_set_standby_mode.

During sleep, enter standby mode with slave tuner output enabled,
loop through on and xtal oscillator on.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

All YUV to RGB conversions in usbvision were reverted
(conversion to BGR but saying RGB to the application)
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
Acked-by: NDwaine Garden <DwaineGarden@rogers.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Changeset 7e65d6e8f6df removed a very bad hack on mmap(). However, the fixes
weren't considering usermap and overlay memory models. This were breaking
direct reading from /dev/video?, used mostly by mpeg aware drivers.

Thanks to Steven Toth <stoth@linuxtv.org> for reporting the issue and
bissecting it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>