Also add check for dma controller or the uart ports.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Major changes are:
* refine the comments in the driver
* remove unused member from structure "hsu_port"
* extended spin_lock protoction for dma mode in port_irq()
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A general problem for uart rx dma channel is you never know when
and how much data will be received, so usually preset it a DMA
descriptor with a big size, and rely on DMA RX timeout IRQ to
know there is some data in rx channel.

For a RX data size of multiple of MOTSR, there will be no timeout
IRQ issued, thus OS will never be notified about that.

This is a work around for that, current timer frequency is 5 times
per second, it should vary according to the baud rate

When future silicon version fix the problem, this workaround need
be removed
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a PCI & UART driver, which suppors both PIO and DMA mode
UART operation. It has 3 identical UART ports and one internal
DMA controller.

Current FW will export 4 pci devices for hsu: 3 uart ports and 1
dma controller, each has one IRQ line. And we need to discuss the
device model, one PCI device covering whole HSU should be a better
model, but there is a problem of how to export the 4 IRQs info

Current driver set the highest baud rate to 2746800bps, which is
easy to scale down to 115200/230400.... To suport higher baud rate,
we need add special process, change DLAB/DLH/PS/DIV/MUL registers
all together.

921600 is the highest baud rate that has been tested with Bluetooth
modem connected to HSU port 0. Will test more when there is right
BT firmware.

Current version contains several work around for A0's Silicon bugs
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

mxser_transmit_chars(tty, port) is called only from mxser_interrupt().
NULL check is performed in mxser_interrupt() so it is redundant here.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLytochkin Boris <lytboris@gmail.com>
Tested-by: NLytochkin Boris <lytboris@gmail.com>
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

(ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) doesn't exist in Kconfig, therefore
remove all references to it from the source code.
Signed-off-by: NChristoph Egger <siccegge@cs.fau.de>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the probe and remove functions to the devinit and devexit sections.
Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Provide MMIO32 support in 8250_early (aka earlycon)

[randy.dunlap@oracle.com: fix printk format warnings]
[akpm@linux-foundation.org: fix printk args some more]
Signed-off-by: NSamium Gromoff <_deepfire@feelingofgreen.ru>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't take the port spinlock in uart functions where the serial core
already takes care of locking/unlocking them.

The code would actually lock up on architectures where spinlocks are
implemented.

Also protect calling mcf_rx_chars/mcf_tx_chars in the interrupt handler by
the port spinlock and use IRQ_RETVAL to return from isr.

[akpm@linux-foundation.org: make irq-handler return value more explicit]
Signed-off-by: NYury Georgievskiy <ygeorgie@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix several issues related to the RS485 interface:

 - It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the
   serial_rs485 structure (even if "delay_rts_before_send" was existing)

 - It adds a further "delay_rts_after_send" field for those drivers that
   can have a delay after send (e.g., atmel_serial)

 - It fixes the usage of the structure in the atmel_serial driver (where
   "delay_rts_before_send" should be used instead of "delay_rts_after_send").
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NBernhard Roth <br@pwrnet.de>
Cc: Philippe De Muyter <phdm@macqel.be>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It seems that currently ASYNC_FLAGS is one bit short of covering all the
bits of the ASYNC user flags.  In particular it does not cover the
ASYNC_AUTOPROBE bit.

ASYNCB_LAST_USER and ASYNCB_AUTOPROBE are both equal to 15.

Therefore:
ASYNC_AUTOPROBE = 1000 0000 0000 0000
ASYNC_FLAGS     = 0111 1111 1111 1111

So ASYNC_FLAGS is not covering the ASYNC_AUTOPROBE bit.

This patch fixes the issue and with the patch the values will be:
ASYNC_AUTOPROBE = 1000 0000 0000 0000
ASYNC_FLAGS     = 1111 1111 1111 1111

As a side note, doing a "git grep" I didn't find any use of
ASYNC_AUTOPROBE or ASYNCB_AUTOPROBE in the kernel, besides this include
file.
Signed-off-by: NJohn Villalovos <john.l.villalovos@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ERROR: code indent should use tabs where possible
#32: FILE: drivers/serial/altera_uart.c:397:
+^I         ALTERA_UART_STATUS_TRDY_MSK))$

total: 1 errors, 0 warnings, 39 lines checked

./patches/altera_uart-simplify-altera_uart_console_putc.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches


This fix got lost when someone merged "altera_uart: simplify
altera_uart_console_putc()".  Please don't lose fixes.  Please don't write
of mere patches which have trivial checkpatch errors.

Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use %p instead of %08x in printk().
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Using:

	gcc (GCC) 4.5.0 20100610 (prerelease)

with CONFIG_CONSOLE_TRANSLATIONS=n, the following warnings are seen:

	drivers/char/vt_ioctl.c: In function ‘vt_ioctl’:
	drivers/char/vt_ioctl.c:1309:4: warning: statement with no effect
	drivers/char/vt.c: In function ‘vc_allocate’:
	drivers/char/vt.c:774:3: warning: statement with no effect
	drivers/video/console/vgacon.c: In function ‘vgacon_init’:
	drivers/video/console/vgacon.c:587:3: warning: statement with no effect
	drivers/video/console/vgacon.c: In function ‘vgacon_deinit’:
	drivers/video/console/vgacon.c:606:2: warning: statement with no effect
	drivers/video/console/fbcon.c: In function ‘fbcon_init’:
	drivers/video/console/fbcon.c:1087:3: warning: statement with no effect
	drivers/video/console/fbcon.c:1089:3: warning: statement with no effect
	drivers/video/console/fbcon.c: In function ‘fbcon_set_disp’:
	drivers/video/console/fbcon.c:1369:3: warning: statement with no effect
	drivers/video/console/fbcon.c:1371:3: warning: statement with no effect

This is because several functions in include/linux/vt_kern.h are
defined to (0).  Convert them to static inline functions to
silence the warnings and gain a bit of type safety.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnesessary casts from void*.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

At the moment there is only one platform type supported and there is is
hard wired, but with these changes the infrastructure is now there for
anyone else to provide methods for their hardware.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This device is used by some of the Intel MID platforms. It's not similar
enough to the MAX3100 to use the same driver.

At this point the driver is specific to the platform and not generalised.
We will fix that later.
Signed-off-by: Njianwei.yang <jianwei.yang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the console has been redirected, a hangup of the tty
will cause tty_release to be called under the big tty_mutex,
which leads to a deadlock because hangup is also called
under the BTM.

This moves the BTM deeper into the tty_hangup function so
we can close the redirected tty without holding the BTM.
In case of pty, we now need to drop the BTM before
calling tty_vhangup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ldisc number now gets passed into ->set_ldisc.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most tty drivers may block while opening a device.
Since this possibly depends on another thread
closing it first and both threads may need the BTM,
we need to release it here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The tty locking now follows the rules for mutexes, so
we can replace the BKL usage with a new subsystem
wide mutex.

Using a regular mutex here will change the behaviour
when blocked on the BTM from spinning to sleeping,
but that should not be visible to the user.

Using the mutex also means that all the BTM is now
covered by lockdep.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes all remaining users of tty_lock_nested
to be non-recursive, which lets us kill this function.
As a consequence, we won't need to keep the lock count
any more, which allows more simplifications later.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some wait_until_sent versions require the big
tty mutex, others don't and some callers of
wait_until_sent already hold it while other don't.
That leads to recursive use of the BTM in these
functions, which we're trying to get rid of.

This turns all cleans up the locking there so
that the driver's wait_until_sent function
never takes the BTM itself if it is already
called with that lock held.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to release the BTM in paste_selection() when
sleeping in tty_ldisc_ref_wait to avoid deadlocks
with tty_ldisc_enable.

In tty_set_ldisc, we now always grab the BTM before
taking the ldisc_mutex in order to avoid AB-BA
deadlocks between the two.

tty_ldisc_halt potentially blocks on a workqueue
function that takes the BTM, so we must release
the BTM before calling it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Calling wait_event_interruptible implicitly
releases the BKL when it sleeps, but we need
to do this explcitly when we have converted
it to a mutex.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The wait_event_interruptible_timeout in acm_port_down is
never reached. Remove it to avoid possible deadlocks
with the big tty mutex if someone were to start using
the blocking version of acm_port_down.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

vgacon_do_font_op releases and reacquires the BTM while holding
console_sem. This violates the rule that BTM has to be the
outer lock whenever we hold both.

There does not seem to be any reason to give up the BTM here,
so just stop doing that.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

tty_mutex is never taken with the BTM held, except for
two corner cases that are worked around here.
We give up the BTM before calling tty_release() in the
error path of tty_open().
Similarly, we reorder the locking in ptmx_open()
to get tty_mutex before the BTM.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As a preparation for replacing the big kernel lock
in the TTY layer, wrap all the callers in new
macros tty_lock, tty_lock_nested and tty_unlock.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move termios initialization in open into uart_dtr_rts to make sure
it always gets called when necessary. Based on a suggestion from
Alan Cox.

Alan writes:
Ok this sort of makes sense. Something isn't getting initialised and both
getty and minicom will do a termios set which is sorting it out.
This is occurring because the generic block_til_ready sets
ASYNCB_NORMAL_ACTIVE so the termios updating gets skipped.

This patch should cure it and then we can think about doing it more
elegantly by getting the serial layer to use tty_port_open, kfifo and
the like and removing the tons of repeated crap in all the drivers.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NTony Luck <tony.luck@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Our code now rather closely resembles the helper, so switch to it.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The port mutex protects port->tty, but these paths never need to walk from
port->tty. They do need the low level lock as the API expects that but they
already also take it.

Thus we can drop the extra mutex lock calls here.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can make this the same as the ones that will be needed by the tty_port
helper logic that we want to move to but still call them from the existing
code base.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We want to push the lock/unlock into the helper functions so that we
can prepare to move to using the tty_port helper. The expansion initially
comes out a bit ugly but its worth the temporary expansion IMHO just so
we can produce a nice testable series of changes.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This takes all the tty references through the expected interface points so
we can refcount them.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vt layer isn't safely handling reference counts to tty object on the input
side. Add a tty port structure to the vt layer in order to implement this using
the standard helpers.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The virtual console layer uses the BKL for various things that don't really
need it. Clean them out.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Pass down the ldisc number so that the drivers don't have to peek into the
tty object themselves. This lets us get rid of another case of back referencing
port to tty which we don't want (because of races versus hangup/close).
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One or two drivers go poking back into the tty from the termios setting
routine in unsafe ways. We don't need to pass the tty down because the
[ab]users are just using it to get at things they can get at anyway.

This leaves low_latency setting to sort out along with set_ldisc use.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>