serial: add support for OX16PCI958 card

Signed-off-by: NLytochkin Boris <lytboris@gmail.com>
Tested-by: NLytochkin Boris <lytboris@gmail.com>
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/serial/8250_pci.c

@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958	0x9538
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
 	pbn_b2_4_921600,
 	pbn_b2_8_921600,
 
+	pbn_b2_8_1152000,
+
 	pbn_b2_bt_1_115200,
 	pbn_b2_bt_2_115200,
 	pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b2_8_1152000] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b2_bt_1_115200] = {
 		.flags		= FL_BASE2|FL_BASE_BARS,
 		.num_ports	= 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+		PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+		pbn_b2_8_1152000 },
 
 	/*
 	 * Oxford Semiconductor Inc. Tornado PCI express device range.