- 05 9月, 2014 1 次提交
-
-
由 Paul Bolle 提交于
The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed. Reported-by: NMartin Walch <walch.martin@web.de> Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Reviewed-by: NRajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rajeev Kumar <rajeev_kumar@mentor.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 14 7月, 2014 2 次提交
-
-
由 Pratyush Anand 提交于
This patch adds necessary DT nodes for pcie controllers and miphys for SPEAr13xx SoCs. SPEAr1310 has 3 PCIe ports and SPEAr1340 has 1, which are multiplexed with ahci/sata pins. By default evaluation board of both controller works in ahci mode. Because of this, these nodes are marked "disabled" by default. In order to use pcie controller on evaluation boards do necessary modifications on board and enable (By replacing "disabled" with "okay") pcie and miphy from respective 'evb' dtsi file. Phy specific initialization was previously done from spear1340.c, which isn't required anymore as we have separate drivers for it. Remove it. Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NPratyush Anand <pratyush.anand@st.com> Signed-off-by: NMohit Kumar <mohit.kumar@st.com> [viresh: fixed logs/cclist/checkpatch warnings, clubbed multiple patches into one] Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
-
由 Pratyush Anand 提交于
SPEAr SOCs have some miscellaneous registers which are used to configure peripheral. This patch adds dt node and binding information for this block. Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPratyush Anand <pratyush.anand@st.com> Cc: devicetree@vger.kernel.org [viresh: fixed logs/cclist] Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
-
- 17 6月, 2014 1 次提交
-
-
由 Stephen Boyd 提交于
This config exists entirely to hide the cpufreq menu from the kernel configuration unless a platform has selected it. Nothing is actually built if this config is 'Y' and it just leads to more patches that add a select under a platform Kconfig so that some other CPUfreq option can be chosen. Let's remove the option so that we can always enable CPUfreq drivers on ARM platforms. Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 10 3月, 2014 1 次提交
-
-
由 Paul Bolle 提交于
Clean up an obvious editing mistake introduced by commit 4b6effb6 ("ARM: spear: merge Kconfig files"). Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 2月, 2014 3 次提交
-
-
由 Rob Herring 提交于
Many V6 and V7 platforms have an L2x0 cache, so make CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform builds. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NStephen Warren <swarren@nvidia.com> Tested-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 08 10月, 2013 1 次提交
-
-
由 Uwe Kleine-König 提交于
CLKDEV_LOOKUP selects HAVE_CLK and COMMON_CLK selects CLKDEV_LOOKUP. So all symbols that select at least two of these symbols can be simplified. For imx, omap2 and ux500 some rearrangements were necessary before the simplification. Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Boyd <sboyd@codeaurora.org> Acked-by: NDinh Nguyen <dinguyen@altera.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NPawel Moll <pawel.moll@arm.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 25 6月, 2013 1 次提交
-
-
由 Stephen Boyd 提交于
Separate the smp_twd timers from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Tested-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
- 19 4月, 2013 1 次提交
-
-
由 Paul Bolle 提交于
Do what commit f12a500e ("ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ") wanted to do. [arnd: fix botched merge from changing the Kconfig file] Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 10 4月, 2013 1 次提交
-
-
由 Stephen Boyd 提交于
The TWD and SCU configs are selected by default as long as MSM_SCORPIONMP is false and/or MCT is false. Implementing the logic this way certainly saves lines in the Kconfig but it precludes those machines which select MSM_SCORPIONMP or MCT from participating in the single zImage effort because when those machines are combined with other SMP capable machines the TWD and SCU are no longer selected by default. Push the select out to the machine entries so that we can compile these machines together and still select the appropriate configs. Cc: Barry Song <baohua.song@csr.com> Acked-by: NDavid Brown <davidb@codeaurora.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: NPawel Moll <pawel.moll@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: NSimon Horman <horms@verge.net.au> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: NViresh Kumar <viresh.linux@gmail.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 13 3月, 2013 3 次提交
-
-
由 Arnd Bergmann 提交于
The spear platform is now multiplatform capable in principle, and everything still builds when enabled. This slightly rearranges the Kconfig options for spear to enable both single- and multiplatform support. As a side-effect, even building the single spear kernel can now enable spear3xx and spear6xx simultaneously, although not together with spear13xx, because they are a different archicture version (v7 instead of v5). Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
由 Arnd Bergmann 提交于
There are no conflicting files between the three mach-spear* directories and plat-spear any more, so we can now move all file to a common mach-spear directory. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
由 Arnd Bergmann 提交于
As a preparation to merging the spear platforms into one directory, this merges the four Kconfig files into one. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
- 06 3月, 2013 1 次提交
-
-
由 Paul Bolle 提交于
Do what commit f12a500e ("ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ") wanted to do. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 19 2月, 2013 1 次提交
-
-
由 Viresh Kumar 提交于
SPEAr13xx supports cpufreq and has an upstreamed driver for it. This patch enables cpufreq configs for SPEAr13xx. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 18 11月, 2012 1 次提交
-
-
由 Shiraz Hashim 提交于
SPEAr platform provides a provision to control chipselects of ARM PL022 Prime Cell spi controller through its system registers, which otherwise remains under PL022 control which some protocols do not want. This commit intends to provide the spi chipselect control in software over gpiolib interface. spi chip drivers can use the exported gpiolib interface to define their chipselect through DT or platform data. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Reviewed-by: NVipin Kumar <vipin.kumar@st.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 14 10月, 2012 1 次提交
-
-
由 Russell King 提交于
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 5月, 2012 1 次提交
-
-
由 Viresh Kumar 提交于
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
-
- 23 4月, 2012 2 次提交
-
-
由 Viresh Kumar 提交于
Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NStephen Warren <swarren@wwwdotorg.org>
-
由 Viresh Kumar 提交于
This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
-
- 14 4月, 2010 1 次提交
-
-
由 viresh kumar 提交于
Reviewed-by: NLinus Walleij <linux.walleij@stericsson.com> Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-