Here's the follow-up patch which introduces the prototypes for the new
syscalls.  There was also a typo in one of the new symbols.
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Older pSeries systems with serial ports dont get any console output after
recent changes.  CONFIG_ISA does not make sense for CONFIG_PPC_PSERIES
because it enables lots of old drivers.  Instead, remove the dependency on
CONFIG_ISA from the serial port discovery code.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to use the compat function here.

Pointer out by Heiko Carstens <heiko.carstens@de.ibm.com>

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Handle more bogus MCFG entries

Some Asus P4 boards seem to have broken MCFG tables with
only a single entry for busses 0-0.  Special case these
and assume they mean all busses can be accessed.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init()
cleanups:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2
    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2

Greg, on it's way upstream, pci_module_init() return sneaked back in for
cyblafb?

    http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2
    http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2

Remove for good.
Signed-off-by: NArthur Othieno <apgo@patchbomb.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error checking is scattered through various layers of the dlpar code,
leading to a somewhat opaque code structure. This patch consolidates
error checking in one routine, simplifying the code a tad. There's
also some whitespace cleanup here too.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor cleanup. Move structure initializer to bottom of file,
this allows elimination of eyeball-strain-inducing forward
declarations.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines.
Remove rpaphp_remove_slot(), which is a one-liner.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_enable_pci_slot()
has a fairly simple logic structure, once all of the debug printk's
are removed. Its called from only one place, and that place also
has a very simple structure once he printk's are removed.  Merge
the two together.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_unconfig_pci_adapter()
is really just three lines of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the thre lines.
Also, provide proper semaphore locking in the affected function
disable_slot()
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_eeh_remove_bus_device() is a dupe of
eeh_remove_bus_device(). Remove it.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_config_pci_adapter()
is really just one line of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the one line.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_fixup_new_pci_devices() has been migrated to
pcibios_fixup_new_pci_devices() in
arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_find_pci_bus() has been migrated to
pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the AMD POGO errata on the hotplug controller where the
platform will lock up or reboot if PERR/SERR generation is enabled and a
slot is sent an enable command.  This fix disables PERR/SERR generation
before a slot is sent the enable command by first saving related
registers, turning off SERR/PERR generation, enabling the slot, then
restoring the registers.
Signed-off-by: NDavid Keck <david.keck@amd.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removing and then adding a PCI slot to a running partition results in
a kernel panic. The current code attempts to add iospace for an entire
root bus, which is inappropriate, and silently fails.  When a pci device
tries to use the iospace, a page fault is taken, as the iospace had not
been mapped, and of course the page fault cannot be resolved.

This only occurs for PCI adapters using pio, which may be why it hadn't
been seen earlier (this seems to have been broken for a while).
This patch has survived testing of dozens of slot add and removes.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The RPAPHP hoplug driver will not build as a module, because it calls
on pci_claim_resource(), which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>

A grep indicates that building drivers/parisc/lba_pci.c
would have trouble building as a module for the same reason.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pci_ids.h: remove duplicates.  Compile tested allmodconfig.
Signed-off-by: NGrant Coady <gcoady@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently
removed.  The ecc.c module, which is not a part of the kernel.org tree, but
included in some distributions, fails to compile.
Signed-off-by: NMark Rustad <mrustad@mac.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove reference to pcihpfs that no longer exists.
Signed-off-by: NPavel Machek <pavel@suse.cz>

Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I missed this usage in drivers/pci/msi.h:

#ifdef CONFIG_SMP
#define set_msi_irq_affinity    set_msi_affinity
#else
#define set_msi_irq_affinity    NULL
#endif

set_msi_affinity() is declared and exclusively used in msi.c.
Here's a better way so (hopefully) history doesn't repeat itself.
Signed-off-by: NGrant Grundler <iod00d@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch #if 0's the unused global function pci_find_ext_capability().
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files.
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Scheduled the removal of pci_module_init.
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PCI_LEGACY_PROC is deprecated since 2.5.53 in favor of lspci(8).
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It was copy&pasted from tcp_v6_send_synack() which has
a DST leak recently fixed by Eric W. Biederman.

So dccp_v6_send_response() needs the same fix too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix dst reference counting in tcp_v6_send_synack

Analysis:
Currently tcp_v6_send_synack is never called with a dst entry
so dst always comes in as NULL.

ip6_dst_lookup calls ip6_route_output which calls dst_hold
before it returns the dst entry.   Neither xfrm_lookup
nor tcp_make_synack consume the dst entry so we still have
a dst_entry with a bumped refrence count at the end of
this function.

Therefore we need to call dst_release just before we return
just like tcp_v4_send_synack does.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet_bind_bucket_create was exported twice.  Keep the export in the
file where inet_bind_bucket_create is defined.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a simpler fix for the two races in bridge device removal.
The Xen race of delif and notify is managed now by a new deleted flag.
No need for barriers or other locking because of rtnl mutex.

The del_timer_sync()'s are unnecessary, because br_stp_disable_port
delete's the timers, and they will finish running before RCU callback.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_route_newports uses the struct flowi from the struct rtable returned
by ip_route_connect for the new route lookup and just replaces the port
numbers if they have changed. If an IPsec policy exists which doesn't match
port 0 the struct flowi won't have the proto field set and no xfrm lookup
is done for the changed ports.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes sure that the correct length is reported when freeing
a dma-coherent buffer; some platforms complain if that's wrong.
It also makes two parameters readonly in sysfs, as they're not
safe to change while tests are running.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>