- 22 7月, 2012 5 次提交
-
-
由 Alexander Duyck 提交于
This change makes it so that we can use the atr_sample_rate to determine if we are capable of supporting ATR. The advantage to this approach is that it allows us to now determine the setting of the IXGBE_FLAG_FDIR_HASH_CAPABLE based on the queueing scheme, instead of the queueing scheme being based on the flag. Using this approach there are essentially 5 conditions that must be checked prior to trying to enable ATR: 1. Is SR-IOV disabled? 2. Are the number of TCs <= 1? 3. Is RSS queueing limit greater than 1? 4. Is atr_sample_rate set? 5. Is Flow Director perfect filtering disabled? If any of these conditions are enabled they should disable ATR filtering. Note that in the case of conditions 1 through 4 being met we will set things up for ATR queueing, however if test 5 fails we will still leave the queues allocated for use by perfect filters. The reason for this is to allow for us to switch back and forth between ntuple and ATR without needing to reallocate the descriptor rings. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change adds support for handling IO errors and slot resets. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change adds a spinlock around the mailbox accesses to prevent simultaneous access to the mailboxes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch does two things. First it drops the unnecessary work of searching for enabled VFs when we first bring up the adapter and instead just uses pci_num_vf to determine how many VFs are enabled on the adapter. The second thing it does is drop the use of vfdev from the vf_data_storage structure. Instead we just search the entire system for a VF that has us as it's PF, and then if that VF is assigned we indicate that the VFs are assigned. This allows us to still check for assigned VFs even if the vfinfo allocation has failed, or vfinfo has been freed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This is meant to fix a bug in which we were not checking for pre-existing VFs if we were not setting the max_vfs value at driver load. What happens now is that we always call ixgbe_enable_sriov and this checks for pre-existing VFs ore requested VFs prior to deciding on no SR-IOV. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 21 7月, 2012 26 次提交
-
-
由 Denis Efremov 提交于
The replacement of spin_lock_irq/spin_unlock_irq pair in interrupt handler by spin_lock_irqsave/spin_lock_irqrestore pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch由 David S. Miller 提交于
Jesse Gross says: ==================== A few bug fixes and small enhancements for net-next/3.6. ... Ansis Atteka (1): openvswitch: Do not send notification if ovs_vport_set_options() failed Ben Pfaff (1): openvswitch: Check gso_type for correct sk_buff in queue_gso_packets(). Jesse Gross (2): openvswitch: Enable retrieval of TCP flags from IPv6 traffic. openvswitch: Reset upper layer protocol info on internal devices. Leo Alterman (1): openvswitch: Fix typo in documentation. Pravin B Shelar (1): openvswitch: Check currect return value from skb_gso_segment() Raju Subramanian (1): openvswitch: Replace Nicira Networks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We were using a special key "0" for all loopback and point-to-point device neigh lookups under ipv4, but we wouldn't use that special key for the neigh creation. So basically we'd make a new neigh at each and every lookup :-) This special case to use only one neigh for these device types is of dubious value, so just remove it entirely. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Leo Alterman 提交于
Signed-off-by: NLeo Alterman <lalterman@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com>
-
由 Ben Pfaff 提交于
At the point where it was used, skb_shinfo(skb)->gso_type referred to a post-GSO sk_buff. Thus, it would always be 0. We want to know the pre-GSO gso_type, so we need to obtain it before segmenting. Before this change, the kernel would pass inconsistent data to userspace: packets for UDP fragments with nonzero offset would be passed along with flow keys that indicate a zero offset (that is, the flow key for "later" fragments claimed to be "first" fragments). This inconsistency tended to confuse Open vSwitch userspace, causing it to log messages about "failed to flow_del" the flows with "later" fragments. Signed-off-by: NBen Pfaff <blp@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com>
-
由 Pravin B Shelar 提交于
Fix return check typo. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com>
-
由 Cloud Ren 提交于
When io access mode is enabled by BOOTROM or BIOS for AR8152 v2.1, the register can't be read/write by memory access mode. Clearing Bit 8 of Register 0x21c could fixed the issue. Signed-off-by: NCloud Ren <cjren@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nxiong <xiong@qca.qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikulas Patocka 提交于
This patch fixes a crash tun_chr_close -> netdev_run_todo -> tun_free_netdev -> sk_release_kernel -> sock_release -> iput(SOCK_INODE(sock)) introduced by commit 1ab5ecb9 The problem is that this socket is embedded in struct tun_struct, it has no inode, iput is called on invalid inode, which modifies invalid memory and optionally causes a crash. sock_release also decrements sockets_in_use, this causes a bug that "sockets: used" field in /proc/*/net/sockstat keeps on decreasing when creating and closing tun devices. This patch introduces a flag SOCK_EXTERNALLY_ALLOCATED that instructs sock_release to not free the inode and not decrement sockets_in_use, fixing both memory corruption and sockets_in_use underflow. It should be backported to 3.3 an 3.4 stabke. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Override the metrics with rt_pmtu Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jerr Kirsher says: ==================== This series contains updates to ixgbe. ... Alexander Duyck (9): ixgbe: Use VMDq offset to indicate the default pool ixgbe: Fix memory leak when SR-IOV VFs are direct assigned ixgbe: Drop references to deprecated pci_ DMA api and instead use dma_ API ixgbe: Cleanup configuration of FCoE registers ixgbe: Merge all FCoE percpu values into a single structure ixgbe: Make FCoE allocation and configuration closer to how rings work ixgbe: Correctly set SAN MAC RAR pool to default pool of PF ixgbe: Only enable anti-spoof on VF pools ixgbe: Enable FCoE FSO and CRC offloads based on CAPABLE instead of ENABLED flag ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== This patchset represents the way I walked when I was adding multiqueue support for team driver. Jiri Pirko (6): net: honour netif_set_real_num_tx_queues() retval rtnl: allow to specify different num for rx and tx queue count rtnl: allow to specify number of rx and tx queues on device creation net: rename bond_queue_mapping to slave_dev_queue_mapping bond_sysfs: use ream_num_tx_queues rather than params.tx_queue team: add multiqueue support ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Largely copied from bonding code. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since now number of tx queues can be specified during bond instance creation and therefore it may differ from params.tx_queues, use rather real_num_tx_queues for boundary check. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As this is going to be used not only by bonding. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
This patch introduces IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES by which userspace can set number of rx and/or tx queues to be allocated for newly created netdevice. This overrides ops->get_num_[tr]x_queues() Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Also cut out unused function parameters and possible err in return value. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
In netif_copy_real_num_queues() the return value of netif_set_real_num_tx_queues() should be checked. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Modern TCP stack highly depends on tcp_write_timer() having a small latency, but current implementation doesn't exactly meet the expectations. When a timer fires but finds the socket is owned by the user, it rearms itself for an additional delay hoping next run will be more successful. tcp_write_timer() for example uses a 50ms delay for next try, and it defeats many attempts to get predictable TCP behavior in term of latencies. Use the recently introduced tcp_release_cb(), so that the user owning the socket will call various handlers right before socket release. This will permit us to post a followup patch to address the tcp_tso_should_defer() syndrome (some deferred packets have to wait RTO timer to be transmitted, while cwnd should allow us to send them sooner) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: John Heffner <johnwheffner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When/if sysctl_tcp_abc > 1, we expect to increase cwnd by 2 if the received ACK acknowledges more than 2*MSS bytes, in tcp_slow_start() Problem is this RFC 3465 statement is not correctly coded, as the while () loop increases snd_cwnd one by one. Add a new variable to avoid this off-by one error. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: John Heffner <johnwheffner@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Acked-by: NYuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Fix a missing roundup_pow_of_two(), since tcpmhash_entries is not guaranteed to be a power of two. Uses hash_32() instead of custom hash. tcpmhash_entries should be an unsigned int. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vijay Subramanian 提交于
Applied to a set of static inline functions in tcp_input.c Signed-off-by: NVijay Subramanian <subramanian.vijay@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Use PCI_VENDOR_ID_INTEL from pci_ids.h instead of creating its own vendor ID #define. Signed-off-by: NJon Mason <jdmason@kudzu.us> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Use PCI_VENDOR_ID_INTEL from pci_ids.h instead of creating its own vendor ID #define. Signed-off-by: NJon Mason <jdmason@kudzu.us> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Remove myself from myri10ge MAINTAINERS list Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== the fifth pull request for upcoming v3.6 net-next cleans up and improves the janz-ican3 driver (6 patches by Ira W. Snyder, one by me). A patch by Steffen Trumtrar adds imx53 support to the flexcan driver. And another patch by me, which marks the bit timing constant in the CAN drivers as "const". ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
- 20 7月, 2012 9 次提交
-
-
由 Ira W. Snyder 提交于
The Janz VMOD-ICAN3 hardware has support for one shot packet transmission. This means that a packet will be attempted to be sent once, with no automatic retries. The SocketCAN core has a controller-wide setting for this mode: CAN_CTRLMODE_ONE_SHOT. The Janz VMOD-ICAN3 hardware supports this flag on a per-packet level, but the SocketCAN core does not. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
If the bus error quota is set to infinite and the host CPU cannot keep up, the Janz VMOD-ICAN3 firmware will stop responding to control messages until the controller is reset. The firmware will automatically stop sending bus error messages when the quota is reached, and will only resume sending bus error messages when the quota is re-set to a positive value. This limitation is worked around by setting the bus error quota to one message, and then re-setting the quota to one message every time a bus error message is received. By doing this, the firmware never stops responding to control messages. The CAN bus can be reset without a hard-reset of the controller card. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The Janz VMOD-ICAN3 firmware does not support any sort of TX-done notification or interrupt. The driver previously used the hardware loopback to attempt to work around this deficiency, but this caused all sockets to receive all messages, even if CAN_RAW_RECV_OWN_MSGS is off. Using the new function ican3_cmp_echo_skb(), we can drop the loopback messages and return the original skbs. This fixes the issues with CAN_RAW_RECV_OWN_MSGS. A private skb queue is used to store the echo skbs. This avoids the need for any index management. Due to a lack of TX-error interrupts, bus errors are permanently enabled, and are used as a TX-error notification. This is used to drop an echo skb when transmission fails. Bus error packets are not generated if the user has not enabled bus error reporting. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The error and byte counter statistics were being incremented incorrectly. For example, a TX error would be counted both in tx_errors and rx_errors. This corrects the problem so that tx_errors and rx_errors are only incremented for errors caused by packets sent to the bus. Error packets generated by the driver are not counted. The byte counters are only increased for packets which are actually transmitted or received from the bus. Error packets generated by the driver are not counted. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
This patch cleans up the ICAN3 to Linux CAN frame and vice versa conversion functions: - RX: Use get_can_dlc() to limit the dlc value. - RX+TX: Don't copy the whole frame, only copy the amount of bytes specified in cf->can_dlc. Acked-by: NIra W. Snyder <iws@ovro.caltech.edu> Tested-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The commit which added the janz-ican3 driver and commit 3ccd4c61 "can: Unify droping of invalid tx skbs and netdev stats" were committed into mainline Linux during the same merge window. Therefore, the addition of this code to the janz-ican3 driver was forgotten. This patch adds the expected code. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The code which used this variable was removed during review, before the driver was added to mainline Linux. It is now dead code, and can be removed. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Steffen Trumtrar 提交于
This patch adds support for a second clock to the flexcan driver. On modern freescale ARM cores like the imx53 and imx6q two clocks ("ipg" and "per") must be enabled in order to access the CAN core. In the original driver, the clock was requested without specifying the connection id, further all mainline ARM archs with flexcan support (imx28, imx25, imx35) register their flexcan clock without a connection id, too. This patch first renames the existing clk variable to clk_ipg and converts it to devm for easier error handling. The connection id "ipg" is added to the devm_clk_get() call. Then a second clock "per" is requested. As all archs don't specify a connection id, both clk_get return the same clock. This ensures compatibility to existing flexcan support and adds support for imx53 at the same time. After this patch hits mainline, the archs may give their existing flexcan clock the "ipg" connection id and implement a dummy "per" clock. This patch has been tested on imx28 (unmodified clk tree) and on imx53 with a seperate "ipg" and "per" clock. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: NHui Wang <jason77.wang@gmail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
This patch marks the bittiming_const pointer as in the struct can_pric as "const". This allows us to mark the struct can_bittiming_const in the CAN drivers as "const", too. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-