提交 99d74487 编写于 作者: A Alexander Duyck 提交者: Jeff Kirsher

ixgbe: Drop probe_vf and merge functionality into ixgbe_enable_sriov

This is meant to fix a bug in which we were not checking for pre-existing
VFs if we were not setting the max_vfs value at driver load.  What happens
now is that we always call ixgbe_enable_sriov and this checks for
pre-existing VFs ore requested VFs prior to deciding on no SR-IOV.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 186e8687
......@@ -1061,8 +1061,7 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
}
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->atr_sample_rate = 0;
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
ixgbe_disable_sriov(adapter);
ixgbe_disable_sriov(adapter);
adapter->ring_feature[RING_F_RSS].limit = 1;
ixgbe_set_num_queues(adapter);
......
......@@ -4490,6 +4490,12 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
hw->fc.send_xon = true;
hw->fc.disable_fc_autoneg = false;
#ifdef CONFIG_PCI_IOV
/* assign number of SR-IOV VFs */
if (hw->mac.type != ixgbe_mac_82598EB)
adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs;
#endif
/* enable itr by default in dynamic mode */
adapter->rx_itr_setting = 1;
adapter->tx_itr_setting = 1;
......@@ -6942,26 +6948,6 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_fdb_dump = ixgbe_ndo_fdb_dump,
};
static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
const struct ixgbe_info *ii)
{
#ifdef CONFIG_PCI_IOV
struct ixgbe_hw *hw = &adapter->hw;
if (hw->mac.type == ixgbe_mac_82598EB)
return;
/* The 82599 supports up to 64 VFs per physical function
* but this implementation limits allocation to 63 so that
* basic networking resources are still available to the
* physical function. If the user requests greater thn
* 63 VFs then it is an error - reset to default of zero.
*/
adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs;
ixgbe_enable_sriov(adapter, ii);
#endif /* CONFIG_PCI_IOV */
}
/**
* ixgbe_wol_supported - Check whether device supports WoL
* @hw: hw specific details
......@@ -7206,8 +7192,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_sw_init;
}
ixgbe_probe_vf(adapter, ii);
#ifdef CONFIG_PCI_IOV
ixgbe_enable_sriov(adapter, ii);
#endif
netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
......@@ -7411,8 +7399,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
ixgbe_release_hw_control(adapter);
ixgbe_clear_interrupt_scheme(adapter);
err_sw_init:
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
ixgbe_disable_sriov(adapter);
ixgbe_disable_sriov(adapter);
adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
iounmap(hw->hw_addr);
err_ioremap:
......
......@@ -82,7 +82,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
const struct ixgbe_info *ii)
{
struct ixgbe_hw *hw = &adapter->hw;
int err = 0;
int num_vf_macvlans, i;
struct vf_macvlans *mv_list;
int pre_existing_vfs = 0;
......@@ -106,10 +105,21 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
"enabled for this device - Please reload all "
"VF drivers to avoid spoofed packet errors\n");
} else {
int err;
/*
* The 82599 supports up to 64 VFs per physical function
* but this implementation limits allocation to 63 so that
* basic networking resources are still available to the
* physical function. If the user requests greater thn
* 63 VFs then it is an error - reset to default of zero.
*/
adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63);
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
if (err) {
e_err(probe, "Failed to enable PCI sriov: %d\n", err);
goto err_novfs;
adapter->num_vfs = 0;
return;
}
}
......@@ -193,11 +203,7 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
/* Oh oh */
e_err(probe, "Unable to allocate memory for VF Data Storage - "
"SRIOV disabled\n");
pci_disable_sriov(adapter->pdev);
err_novfs:
adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
adapter->num_vfs = 0;
ixgbe_disable_sriov(adapter);
}
#endif /* #ifdef CONFIG_PCI_IOV */
......@@ -219,6 +225,10 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
kfree(adapter->mv_list);
adapter->mv_list = NULL;
/* if SR-IOV is already disabled then there is nothing to do */
if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
return;
#ifdef CONFIG_PCI_IOV
/* disable iov and allow time for transactions to clear */
pci_disable_sriov(adapter->pdev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册