- 16 9月, 2014 6 次提交
-
-
由 Alex Gartrell 提交于
The synchronization protocol is not compatible with heterogeneous pools, so we need to verify that we're not turning both on at the same time. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Alex Gartrell 提交于
The assumption that dest af is equal to service af is now unreliable, so we must specify it manually so as not to copy just the first 4 bytes of a v6 address or doing an illegal read of 16 butes on a v6 address. We "lie" in two places: for synchronization (which we will explicitly disallow from happening when we have heterogeneous pools) and for black hole addresses where there's no real dest. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Alex Gartrell 提交于
Part of a series of diffs to tease out destination family from virtual family. This diff just adds a parameter to ip_vs_trash_get and then uses it for comparison rather than svc->af. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Alex Gartrell 提交于
We need to remove the assumption that virtual address family is the same as real address family in order to support heterogeneous services (that is, services with v4 vips and v6 backends or the opposite). Signed-off-by: NAlex Gartrell <agartrell@fb.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Alex Gartrell 提交于
This is necessary to support heterogeneous pools. For example, if you have an ipv6 addressed network, you'll want to be able to forward ipv4 traffic into it. This patch enforces that destination address family is the same as service family, as none of the forwarding mechanisms support anything else. For the old setsockopt mechanism, we simply set the dest address family to AF_INET as we do with the service. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Kenny Mathis 提交于
Add simple weighted IPVS failover support to the Linux kernel. All other scheduling modules implement some form of load balancing, while this offers a simple failover solution. Connections are directed to the appropriate server based solely on highest weight value and server availability. Tested functionality with keepalived. Signed-off-by: NKenny Mathis <kmathis@chokepoint.net> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 12 9月, 2014 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
Users are starting to test nf_tables with no x_tables support. Therefore, masquerading needs to be indenpendent of it from Kconfig. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Now that we have masquerading support in nf_tables, the NAT chain can be use with it, not only for SNAT/DNAT. So make this chain type independent of it. While at it, move it inside the scope of 'if NF_NAT_IPV*' to simplify dependencies. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 11 9月, 2014 16 次提交
-
-
由 Pablo Neira Ayuso 提交于
To keep this consistent with other nft_*_attributes. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
CONFIG_NF_NAT_MASQUERADE_IPV6=m # CONFIG_IP6_NF_TARGET_MASQUERADE is not set results in: net/ipv6/netfilter/nf_nat_masquerade_ipv6.c: In function ‘nf_nat_masquerade_ipv6’: net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:41:14: error: ‘struct nf_conn_nat’ has no member named ‘masq_index’ nfct_nat(ct)->masq_index = out->ifindex; ^ net/ipv6/netfilter/nf_nat_masquerade_ipv6.c: In function ‘device_cmp’: net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:61:12: error: ‘const struct nf_conn_nat’ has no member named ‘masq_index’ return nat->masq_index == (int)(long)ifindex; ^ net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:62:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[3]: *** [net/ipv6/netfilter/nf_nat_masquerade_ipv6.o] Error 1 Fix this by using the new NF_NAT_MASQUERADE_IPV4 and _IPV6 symbols in include/net/netfilter/nf_nat.h. Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Daniel Borkmann 提交于
Since BPF JIT depends on the availability of module_alloc() and module_free() helpers (HAVE_BPF_JIT and MODULES), we better build that code only in case we have BPF_JIT in our config enabled, just like with other JIT code. Fixes builds for arm/marzen_defconfig and sh/rsk7269_defconfig. ==================== kernel/built-in.o: In function `bpf_jit_binary_alloc': /home/cwang/linux/kernel/bpf/core.c:144: undefined reference to `module_alloc' kernel/built-in.o: In function `bpf_jit_binary_free': /home/cwang/linux/kernel/bpf/core.c:164: undefined reference to `module_free' make: *** [vmlinux] Error 1 ==================== Reported-by: NFengguang Wu <fengguang.wu@intel.com> Fixes: 738cbe72 ("net: bpf: consolidate JIT binary allocator") Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== cxgb4: Allow FW size upto 1MB, support for S25FL032P flash and misc. fixes This patch series adds support to allow FW size upto 1MB, support for S25FL032P flash. Fix t4_flash_erase_sectors to throw an error, when erase sector aren't in the flash and also warning message when adapters have flashes less than 2Mb. Adds device id of new adapter and removes device id of debug adapter. The patches series is created against 'net-next' tree. And includes patches on cxgb4 driver and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
cxgb4: Fix t4_flash_erase_sectors() to throw an error when requested to erase sectors which aren't in the FLASH Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Add support for Spansion S25FL032P flash Based on original work by Dimitris Michailidis Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
This fixes the following sparse warnings: sparse: symbol 'tipc_update_nametbl' was not declared. Should it be static? Also, the function is changed to return bool upon success, rather than a potentially freed pointer. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Romain Perier 提交于
Free resources before being disconnected from phy and calling core driver is wrong and should not happen. It avoids a delay of 4-5s caused by the timeout of phy_disconnect(). Signed-off-by: NRomain Perier <romain.perier@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== nf-next pull request The following patchset contains Netfilter/IPVS updates for your net-next tree. Regarding nf_tables, most updates focus on consolidating the NAT infrastructure and adding support for masquerading. More specifically, they are: 1) use __u8 instead of u_int8_t in arptables header, from Mike Frysinger. 2) Add support to match by skb->pkttype to the meta expression, from Ana Rey. 3) Add support to match by cpu to the meta expression, also from Ana Rey. 4) A smatch warning about IPSET_ATTR_MARKMASK validation, patch from Vytas Dauksa. 5) Fix netnet and netportnet hash types the range support for IPv4, from Sergey Popovich. 6) Fix missing-field-initializer warnings resolved, from Mark Rustad. 7) Dan Carperter reported possible integer overflows in ipset, from Jozsef Kadlecsick. 8) Filter out accounting objects in nfacct by type, so you can selectively reset quotas, from Alexey Perevalov. 9) Move specific NAT IPv4 functions to the core so x_tables and nf_tables can share the same NAT IPv4 engine. 10) Use the new NAT IPv4 functions from nft_chain_nat_ipv4. 11) Move specific NAT IPv6 functions to the core so x_tables and nf_tables can share the same NAT IPv4 engine. 12) Use the new NAT IPv6 functions from nft_chain_nat_ipv6. 13) Refactor code to add nft_delrule(), which can be reused in the enhancement of the NFT_MSG_DELTABLE to remove a table and its content, from Arturo Borrero. 14) Add a helper function to unregister chain hooks, from Arturo Borrero. 15) A cleanup to rename to nft_delrule_by_chain for consistency with the new nft_*() functions, also from Arturo. 16) Add support to match devgroup to the meta expression, from Ana Rey. 17) Reduce stack usage for IPVS socket option, from Julian Anastasov. 18) Remove unnecessary textsearch state initialization in xt_string, from Bojan Prtvar. 19) Add several helper functions to nf_tables, more work to prepare the enhancement of NFT_MSG_DELTABLE, again from Arturo Borrero. 20) Enhance NFT_MSG_DELTABLE to delete a table and its content, from Arturo Borrero. 21) Support NAT flags in the nat expression to indicate the flavour, eg. random fully, from Arturo. 22) Add missing audit code to ebtables when replacing tables, from Nicolas Dichtel. 23) Generalize the IPv4 masquerading code to allow its re-use from nf_tables, from Arturo. 24) Generalize the IPv6 masquerading code, also from Arturo. 25) Add the new masq expression to support IPv4/IPv6 masquerading from nf_tables, also from Arturo. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the more common pr_warn. Coalesce formats. Realign arguments. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the more common pr_warn. Realign arguments. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the more common pr_warn. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2014 16 次提交
-
-
由 David S. Miller 提交于
Tom Herbert says: ==================== net: enable GRO for IPIP and SIT This patch sets populates the IPIP and SIT offload structures with gro_receive and gro_complete functions. This enables use of GRO for these. Also, fixed a problem in IPv6 where we were not properly initializing flush_id. Peformance results are below. Note that these tests were done on bnx2x which doesn't provide RX checksum offload of IPIP or SIT (i.e. does not give CHEKCSUM_COMPLETE). Also, we don't get 4-tuple hash for RSS only 2-tuple in this case so all the packets between two hosts are winding up on the same queue. Net result is the interrupting CPU is the bottleneck in GRO (checksumming every packet there). Testing: netperf TCP_STREAM between two hosts using bnx2x. * Before fix IPIP 1 connection 6.53% CPU utilization 6544.71 Mbps 20 connections 13.79% CPU utilization 9284.54 Mbps SIT 1 connection 6.68% CPU utilization 5653.36 Mbps 20 connections 18.88% CPU utilization 9154.61 Mbps * After fix IPIP 1 connection 5.73% CPU utilization 9279.53 Mbps 20 connections 7.14% CPU utilization 7279.35 Mbps SIT 1 connection 2.95% CPU utilization 9143.36 Mbps 20 connections 7.09% CPU utilization 6255.3 Mbps ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add ipv6_gro_receive and ipv6_gro_complete to sit_offload to support GRO. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add inet_gro_receive and inet_gro_complete to ipip_offload to support GRO. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
In TCP gro we check flush_id which is derived from the IP identifier. In IPv4 gro path the flush_id is set with the expectation that every matched packet increments IP identifier. In IPv6, the flush_id is never set and thus is uinitialized. What's worse is that in IPv6 over IPv4 encapsulation, the IP identifier is taken from the outer header which is currently not incremented on every packet for Linux stack, so GRO in this case never matches packets (identifier is not increasing). This patch clears flush_id for every time for a matched packet in IPv6 gro_receive. We need to do this each time to overwrite the setting that would be done in IPv4 gro_receive per the outer header in IPv6 over Ipv4 encapsulation. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Typo fixes submiting/submitting o Coalesce formats o Realign arguments o Add missing terminating '\n' to formats Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
net/ipv4/udp_offload.c:339:5: warning: symbol 'udp4_gro_complete' was not declared. Should it be static? Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Fixes: 57c67ff4 ("udp: additional GRO support") Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
net/core/net_namespace.c:227:18: warning: incorrect type in argument 1 (different address spaces) net/core/net_namespace.c:227:18: expected void const *<noident> net/core/net_namespace.c:227:18: got struct net_generic [noderef] <asn:4>*gen We can use rcu_access_pointer() here as read-side access to the pointer was removed at least one grace period ago. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
net/ipv6/udp_offload.c:159:5: warning: symbol 'udp6_gro_complete' was not declared. Should it be static? Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 57c67ff4 ("udp: additional GRO support") Cc: Tom Herbert <therbert@google.com> Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Remove one sparse warning : net/ipv4/ip_sockglue.c:328:22: warning: incorrect type in assignment (different address spaces) net/ipv4/ip_sockglue.c:328:22: expected struct ip_ra_chain [noderef] <asn:4>*next net/ipv4/ip_sockglue.c:328:22: got struct ip_ra_chain *[assigned] ra And replace one rcu_assign_ptr() by RCU_INIT_POINTER() where applicable. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
It's not used anywhere, so just remove these. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
Instead of looping in the code let's use kernel extension to dump small buffers. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace mdelay with usleep_range to avoid busy loop. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Few packets have timestamping enabled. Exit sock_tx_timestamp quickly in this common case. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
not used anymore since ddecf0f4 (net_sched: sfq: add optional RED on top of SFQ). Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Convert the normal transmit completion path from dev_kfree_skb_any() to dev_consume_skb_any() to help keep dropped packet profiling meaningful. Signed-off-by: NRick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-