Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 13 7月, 2013 1 次提交
  3. 04 7月, 2013 1 次提交
    • B
      HID: kye: Add report fixup for Genius Gila Gaming mouse · 3685c18e
      由 Benjamin Tissoires 提交于 
      Genius Gila Gaming Mouse presents an obviously wrong report descriptor.
the Consumer control (report ID 3) is the following:
0x05, 0x0c,                    // Usage Page (Consumer Devices)       105
0x09, 0x01,                    // Usage (Consumer Control)            107
0xa1, 0x01,                    // Collection (Application)            109
0x85, 0x03,                    //   Report ID (3)                     111
0x19, 0x00,                    //   Usage Minimum (0)                 113
0x2a, 0xff, 0x7f,              //   Usage Maximum (32767)             115
0x15, 0x00,                    //   Logical Minimum (0)               118
0x26, 0xff, 0x7f,              //   Logical Maximum (32767)           120
0x75, 0x10,                    //   Report Size (16)                  123
0x95, 0x03,                    //   Report Count (3)                  125
0x81, 0x00,                    //   Input (Data,Arr,Abs)              127
0x75, 0x08,                    //   Report Size (8)                   129
0x95, 0x01,                    //   Report Count (1)                  131
0x81, 0x01,                    //   Input (Cnst,Arr,Abs)              133
0xc0,                          // End Collection                      135

So the first input whithin this report has a count of 3 but a usage range
of 32768. So this value is obviously wrong as it should not be greater than
the report count.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=959721Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      3685c18e
  5. 03 6月, 2013 1 次提交
  7. 29 5月, 2013 1 次提交
    • J
      HID: add driver for ELO 4000/4500 · d23efc19
      由 Jiri Slaby 提交于 
      This is a driver for ELO 4000/4500 devices which report themselves as
HID devices, but do not really send HID events on touch. So we
introduce a new HID 'quirk' driver with a raw_event handler where we
take care of those events.

What we need additionally is an input_configured hook, because the
device does not mention anything about PRESSURE and TOUCH in its
report descriptor, but it actually generate those. So we set the bits
in the corresponding input_dev in that hook.

Thanks to Petr Ostadal who was willing to test the driver. The rest of
Cc's listed below had something to do with that driver over the years
in our enterprise tree.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Tested-by: NPetr Ostadal <postadal@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Egbert Eich <eich@suse.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      d23efc19
  9. 28 5月, 2013 3 次提交
  11. 23 5月, 2013 1 次提交
    • V
      HID: ignore Jabra speakerphones HID interface · 31b9779c
      由 Vincent Palatin 提交于 
      Add a quirk to ignore Jabra speakerphone 410 and 510 devices HID
interface.
On those devices, the USB audio interface is working nicely,
but the HID interface is not working with the kernel usbhid driver,
and it requires a specific userspace program.
We could unbind it from userspace but just attaching the usbhid driver has
sometimes nasty effects:
either confusing the device state machine or triggering a storm of volume key
events making eventual sound UI blinking like crazy.
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      31b9779c
  13. 06 5月, 2013 1 次提交
    • J
      HID: debug: fix RCU preemption issue · 1deb9d34
      由 Jiri Kosina 提交于 
      Commit 2353f2be ("HID: protect hid_debug_list") introduced mutex
locking around debug_list access to prevent SMP races when debugfs
nodes are being operated upon by multiple userspace processess.

mutex is not a proper synchronization primitive though, as the hid-debug
callbacks are being called from atomic contexts.

We also have to be careful about disabling IRQs when taking the lock
to prevent deadlock against IRQ handlers.

Benjamin reports this has also been reported in RH bugzilla as bug #958935.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.9.0+ #94 Not tainted
 -------------------------------
 include/linux/rcupdate.h:476 Illegal context switch in RCU read-side critical section!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by Xorg/5502:
  #0:  (&evdev->mutex){+.+...}, at: [<ffffffff81512c3d>] evdev_write+0x6d/0x160
  #1:  (&(&dev->event_lock)->rlock#2){-.-...}, at: [<ffffffff8150dd9b>] input_inject_event+0x5b/0x230
  #2:  (rcu_read_lock){.+.+..}, at: [<ffffffff8150dd82>] input_inject_event+0x42/0x230
  #3:  (&(&usbhid->lock)->rlock){-.....}, at: [<ffffffff81565289>] usb_hidinput_input_event+0x89/0x120

 stack backtrace:
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  0000000000000001 ffff8800689c7c38 ffffffff816f249f ffff8800689c7c68
  ffffffff810acb1d 0000000000000000 ffffffff81a03ac7 000000000000019d
  0000000000000000 ffff8800689c7c90 ffffffff8107cda7 0000000000000000
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff810acb1d>] lockdep_rcu_suspicious+0xfd/0x130
  [<ffffffff8107cda7>] __might_sleep+0xc7/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
 BUG: sleeping function called from invalid context at kernel/mutex.c:413
 in_atomic(): 1, irqs_disabled(): 1, pid: 5502, name: Xorg
 INFO: lockdep is turned off.
 irq event stamp: 1098574
 hardirqs last  enabled at (1098573): [<ffffffff816fb53f>] _raw_spin_unlock_irqrestore+0x3f/0x70
 hardirqs last disabled at (1098574): [<ffffffff816faaf5>] _raw_spin_lock_irqsave+0x25/0xa0
 softirqs last  enabled at (1098306): [<ffffffff8104971f>] __do_softirq+0x18f/0x3c0
 softirqs last disabled at (1097867): [<ffffffff81049ad5>] irq_exit+0xa5/0xb0
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  ffffffff81a03ac7 ffff8800689c7c68 ffffffff816f249f ffff8800689c7c90
  ffffffff8107ce60 0000000000000000 ffff8800689c7fd8 ffff88006a62c800
  ffff8800689c7d10 ffffffff816f7770 ffff8800689c7d00 ffffffff81312ac4
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff8107ce60>] __might_sleep+0x180/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      1deb9d34
  15. 01 5月, 2013 1 次提交
  17. 30 4月, 2013 2 次提交
  19. 29 4月, 2013 1 次提交
  21. 19 4月, 2013 1 次提交
  23. 04 4月, 2013 1 次提交
  25. 29 3月, 2013 1 次提交
  27. 14 3月, 2013 1 次提交
  29. 01 3月, 2013 1 次提交
    • A
      HID: Separate struct hid_device's driver_lock into two locks. · c849a614
      由 Andrew de los Reyes 提交于 
      This patch separates struct hid_device's driver_lock into two. The
goal is to allow hid device drivers to receive input during their
probe() or remove() function calls. This is necessary because some
drivers need to communicate with the device to determine parameters
needed during probe (e.g., size of a multi-touch surface), and if
possible, may perfer to communicate with a device on host-initiated
disconnect (e.g., to put it into a low-power state).

Historically, three functions used driver_lock:

- hid_device_probe: blocks to acquire lock
- hid_device_remove: blocks to acquire lock
- hid_input_report: if locked returns -EBUSY, else acquires lock

This patch adds another lock (driver_input_lock) which is used to
block input from occurring. The lock behavior is now:

- hid_device_probe: blocks to acq. driver_lock, then driver_input_lock
- hid_device_remove: blocks to acq. driver_lock, then driver_input_lock
- hid_input_report: if driver_input_lock locked returns -EBUSY, else
  acquires driver_input_lock

This patch also adds two helper functions to be called during probe()
or remove(): hid_device_io_start() and hid_device_io_stop(). These
functions lock and unlock, respectively, driver_input_lock; they also
make a note of whether they did so that hid-core knows if a driver has
changed the lock state.

This patch results in no behavior change for existing devices and
drivers. However, during a probe() or remove() function call in a
driver, that driver may now selectively call hid_device_io_start() to
let input events come through, then optionally call
hid_device_io_stop() to stop them.
Signed-off-by: NAndrew de los Reyes <adlr@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      c849a614
  31. 25 2月, 2013 1 次提交
  33. 19 2月, 2013 1 次提交
    • V
      HID: add ThingM blink(1) USB RGB LED support · 30ba2fbd
      由 Vivien Didelot 提交于 
      The ThingM blink(1) is an open source hardware USB RGB LED. It contains
an internal EEPROM, allowing to configure up to 12 light patterns. A
light pattern is a RGB color plus a fade time. This driver registers a
LED class instance with additional sysfs attributes to support basic
functions such as setting RGB colors, fade and playing. Other functions
are still accessible through the hidraw interface.

At this time, the only documentation for the device is the firmware
source code from ThingM, plus a few schematics. They are available at:

https://github.com/todbot/blink1

This patch is version 3. It updates the name of the source file, the
driver and the led sysfs entry, according to comments from Jiri Kosina
and Simon Wood.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      30ba2fbd
  35. 18 2月, 2013 2 次提交
  37. 05 2月, 2013 1 次提交
  39. 31 1月, 2013 1 次提交
  41. 17 1月, 2013 1 次提交
  43. 16 1月, 2013 1 次提交
    • F
      HID: add support for Sony RF receiver with USB product id 0x0374 · a4649184
      由 Fernando Luis Vázquez Cao 提交于 
      Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have
a RF receiver, multi-interface USB device 054c:0374, that is used to connect
a wireless keyboard and a wireless mouse.

The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not
seem to be generating any pointer events. The problem is that the mouse pointer
is wrongly declared as a constant non-data variable in the report descriptor
(see lsusb and usbhid-dump output below), with the consequence that it is
ignored by the HID code.

Add this device to the have-special-driver list and fix up the report
descriptor in the Sony-specific driver which happens to already have a fixup
for a similar firmware bug.

# lsusb -vd 054C:0374
Bus 003 Device 002: ID 054c:0374 Sony Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x054c Sony Corp.
  idProduct          0x0374
  iSerial                 0
[...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              2 RF Receiver
[...]
          Report Descriptor: (length is 100)
[...]
            Item(Global): Usage Page, data= [ 0x01 ] 1
                            Generic Desktop Controls
            Item(Local ): Usage, data= [ 0x30 ] 48
                            Direction-X
            Item(Local ): Usage, data= [ 0x31 ] 49
                            Direction-Y
            Item(Global): Report Count, data= [ 0x02 ] 2
            Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Logical Minimum, data= [ 0x81 ] 129
            Item(Global): Logical Maximum, data= [ 0x7f ] 127
            Item(Main  ): Input, data= [ 0x07 ] 7
                            Constant Variable Relative No_Wrap Linear
                            Preferred_State No_Null_Position Non_Volatile Bitfield

# usbhid-dump
003:002:001:DESCRIPTOR         1357910009.758544
 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01
 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01
 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02
 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00
 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85
 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06
 C0 C0 C0 C0

Cc: linux-input@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      a4649184
  45. 28 12月, 2012 1 次提交
  47. 12 12月, 2012 2 次提交
  49. 07 12月, 2012 1 次提交
  51. 03 12月, 2012 1 次提交
  53. 15 11月, 2012 2 次提交
  55. 07 11月, 2012 1 次提交
    • F
      HID: Ignore D-WAV/eGalax devices handled by usbtouchscreen · 729b814a
      由 Forest Bond 提交于 
      Previously, both usbhid and usbtouchscreen would bind to D-WAV devices
with class HID and protocol None, so they would be claimed by whichever
driver was loaded first.  Some of these devices do in fact work with
usbhid, but not all of them do.  OTOH they all work with usbtouchscreen
as of commit 037a833e ("Input:
usbtouchscreen - initialize eGalax devices").  So we ignore them in
usbhid to prevent getting in the way of usbtouchscreen and claiming an
interface that we may not be able to do anything useful with.
Signed-off-by: NForest Bond <forest.bond@rapidrollout.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      729b814a
  57. 31 10月, 2012 2 次提交
  59. 17 10月, 2012 1 次提交
  61. 01 10月, 2012 2 次提交
    • D
      HID: Add support for Sony PS3 BD Remote Control · 5844c1cd
      由 David Dillow 提交于 
      The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.

We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: NDavid Dillow <dave@thedillows.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      5844c1cd
    • K
      HID: keep dev_rdesc unmodified and use it for comparisons · 86e6b77e
      由 Kevin Daughtridge 提交于 
      The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.

usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.

BugLink: http://bugs.launchpad.net/bugs/1049623Signed-off-by: NKevin Daughtridge <kevin@kdau.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      86e6b77e
  63. 17 9月, 2012 1 次提交