- 08 3月, 2010 40 次提交
-
-
由 Andi Kleen 提交于
Add a attribute array that is automatically registered and unregistered to struct sysdev_class. This is similar to what struct class has. A lot of drivers add list of attributes, so it's better to do this easily in the common sysdev layer. This adds a new field to struct sysdev_class. I audited the whole tree and there are no dynamically allocated sysdev classes, so this is fully compatible. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andi Kleen 提交于
Adding/Removing a whole array of attributes is very common. Add a standard utility function to do this with a simple function call, instead of requiring drivers to open code this. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andi Kleen 提交于
Using the new attribute argument convert the cpu driver class attributes to carry the node state. Then use a shared function to do what a lot of individual functions did before. This eliminates an ugly macro. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andi Kleen 提交于
Using the new attribute argument convert the node driver class attributes to carry the node state. Then use a shared function to do what a lot of individual functions did before. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andi Kleen 提交于
Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. Similar to sysdev_attributes and normal attributes. This is a tree-wide sweep, converting everything in one go. No functional changes in this patch other than passing the new argument everywhere. Tested on x86, the non x86 parts are uncompiled. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric Miao 提交于
The platform ID table is normally const, force that by adding the attribute. Signed-off-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Torokhov 提交于
Many legacy-style module create singleton platform devices themselves, along with corresponding platform driver. Instead of replicating error handling code in all such drivers, provide a helper that allocates and registers a single platform device and a driver and binds them together. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Radu Voicilas 提交于
No change in functionality. Signed-off-by: NRadu Voicilas <rvoicilas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Radu Voicilas 提交于
No change in functionality. Signed-off-by: NRadu Voicilas <rvoicilas@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
sysfs is creating several devices in cuse class concurrently and with CONFIG_SYSFS_DEPRECATED turned off, it triggers the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff81158b0a>] sysfs_addrm_start+0x4a/0xf0 PGD 75bb067 PUD 75be067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/system/cpu/cpu7/topology/core_siblings CPU 1 Modules linked in: cuse fuse Pid: 4737, comm: osspd Not tainted 2.6.31-work #77 RIP: 0010:[<ffffffff81158b0a>] [<ffffffff81158b0a>] sysfs_addrm_start+0x4a/0xf0 RSP: 0018:ffff88000042f8f8 EFLAGS: 00010296 RAX: ffff88000042ffd8 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880007eef660 RDI: 0000000000000001 RBP: ffff88000042f918 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff81158b0a R12: ffff88000042f928 R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff88000042f9a0 FS: 00007fe93905a950(0000) GS:ffff880008600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 00000000077c9000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process osspd (pid: 4737, threadinfo ffff88000042e000, task ffff880007eef040) Stack: ffff880005da10e8 0000000011cc8d6e ffff88000042f928 ffff880003d28a28 <0> ffff88000042f988 ffffffff811592d7 0000000000000000 0000000000000000 <0> 0000000000000000 0000000000000000 ffff88000042f958 0000000011cc8d6e Call Trace: [<ffffffff811592d7>] create_dir+0x67/0xe0 [<ffffffff811593a8>] sysfs_create_dir+0x58/0xb0 [<ffffffff8128ca7c>] ? kobject_add_internal+0xcc/0x220 [<ffffffff812942e1>] ? vsnprintf+0x3c1/0xb90 [<ffffffff8128cab7>] kobject_add_internal+0x107/0x220 [<ffffffff8128cd37>] kobject_add_varg+0x47/0x80 [<ffffffff8128ce53>] kobject_add+0x53/0x90 [<ffffffff81357d84>] device_add+0xd4/0x690 [<ffffffff81356c2b>] ? dev_set_name+0x4b/0x70 [<ffffffffa001a884>] cuse_process_init_reply+0x2b4/0x420 [cuse] ... The problem is that kobject_add_internal() first adds a kobject to the kset and then try to create sysfs directory for it. If the creation fails, it remove the kobject from the kset. get_device_parent() accesses class_dirs kset while only holding class_dirs.list_lock to see whether the cuse class dir exists. But when it exists, it may not have finished initialization yet or may fail and get removed soon. In the above case, the former happened so the second one ends up trying to create subdirectory under NULL sysfs_dirent. Fix it by grabbing a mutex in get_device_parent(). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NColin Guthrie <cguthrie@mandriva.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio: console: Use better variable names for fill_queue operation virtio: console: Fix type of 'len' as unsigned int
-
由 Linus Torvalds 提交于
Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339 ("clocksource: add argument to resume callback").
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (66 commits) mfd: Fix ucb1x00 build failure for collie_defconfig mfd: Fix lpc_sch related depends/selects, fix build error gpio: Fix sch_gpio warning gpio: add Intel SCH GPIO controller driver i2c: convert i2c-isch to platform_device mfd: Use completion interrupt for WM831x AUXADC mfd: Use completion interrupt for WM835x AUXADC mfd: Introduce remove_script function for twl4030 mfd/mmc: SDHI Kconfig update mfd: sh_mobile_sdhi MMC_CAP_MMC_HIGHSPEED support gpiolib: Force wm831x GPIOs into GPIO mode when requested mfd: Add WM831x revision B support gpiolib: Correct debugfs display of WM831x GPIO inversion gpiolib: Actually set output state in wm831x_gpio_direction_output() tmio_mmc: Balance cell enable()/disable() calls tmio_mmc: Remove const from platform data V3 tmio_mmc: Use 100ms mmc_detect_change() delay tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2 tmio_mmc: Keep card-detect interrupts enabled mfd: Add twl6030 base addr for ID0, ID1, ID2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (368 commits) Staging: winbond: fix up wireless api errors Staging: dream: camera: sk5k3e2fx: fix code style issues Staging: dream: camera: msm_camera: fix code style issues Staging: wlan-ng: More checkpatch.pl error cleanups Staging: wlan-ng - checkpatch.pl fixups Staging: comedi: comedi_fops.c: Checkpatch cleanup Staging: comedi: fix suspect code indent in ni_labpc.c Staging: comedi: fix yet another brace coding style issue in ni_labpc.c Staging: comedi: fix another brace coding style issues in ni_labpc.c Staging: comedi: fix brace coding style issue in ni_labpc.c Staging: comedi: poc: Adding some KERN_ facility level Staging: dream: camera: msm_camera: fix some code style issues Staging: wlan-ng: fix most of the style issues in hfa384x.h Staging: dream: camera: msm_camera: fix coding style issues Staging: comedi: fix bracing coding style and 80 character issues in ni_660x.c Staging: comedi: fix bracing coding style issue in ni_65xx.c Staging: comedi: pcmad: Checkpatch cleanups Staging: comedi: poc: fix coding style issues staging: dt3155: revert u_long to u64 usage Staging: comedi: drivers.c: Checkpatch cleanup ...
-
由 Randy Dunlap 提交于
Fix kernel-doc notation in new seq-file functions and correct spelling. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: Convert sh to use read/update_persistent_clock sh: Move PMB debugfs entry initialization to later stage sh: Fix up flush_cache_vmap() on SMP. sh: fix up MMU reset with variable PMB mapping sizes. sh: establish PMB mappings for NUMA nodes. sh: check for existing mappings for bolted PMB entries. sh: fixed virt/phys mapping helpers for PMB. sh: make pmb iomapping configurable. sh: reworked dynamic PMB mapping. sh: Fix up cpumask_of_pcibus() for the NUMA build. serial: sh-sci: Tidy up build warnings. sh: Fix up ctrl_read/write stragglers in migor setup. serial: sh-sci: Add DMA support. dmaengine: shdma: extend .device_terminate_all() to record partial transfer sh: merge sh7722 and sh7724 DMA register definitions sh: activate runtime PM for dmaengine on sh7722 and sh7724 dmaengine: shdma: add runtime PM support. dmaengine: shdma: separate DMA headers. dmaengine: shdma: convert to platform device resources dmaengine: shdma: fix DMA error handling. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: use __ratelimit in unaligned.c parisc: Convert to read/update_persistent_clock parisc: Simplify param.h by including <asm-generic/param.h> parisc: drop unnecessary cast in __ldcw_align() macro parisc: add strict copy size checks (v2) parisc: remove trailing space in messages parisc: ditto sys_accept4 parisc: wire up sys_recvmmsg
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Provide generic subsystem-level callbacks PM / Runtime: Document power.runtime_auto and related functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: set pci bus master enable bit
-
由 Ben Dooks 提交于
-
由 Ben Dooks 提交于
-
由 Ben Dooks 提交于
-
由 Richard Röjfors 提交于
This patch adds support for the Xilinx XPS IIC Bus Interface. The driver uses the dynamic mode, supporting to put several I2C messages in the FIFO to reduce the number of interrupts. It has the same feature as ocores, it can be passed a list of devices that will be added when the bus is probed. Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Cory Maccarrone 提交于
The current i2c-omap driver is set up for 32-bit registers, which corresponds to most OMAP devices. However, OMAP730/850 based devices use a 16-bit register size. This change modifies the driver to perform a runtime CPU type check to determine the register sizes, and uses a bit shift of either 1 or 2 bits to compute the proper register sizes for all registers. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Luotao Fu 提交于
The start/stop condtions are set in different places repetedly in the i2c-pnx driver. Beside in i2c_pnx_start and i2c_pnx_stop the start/stop bit are also set during the transfer of a i2c message in the master_xmit/rcv calls. This is wrong since we can't set the start/stop condition during the transaction of a single message any way. As a matter of fact, the driver will sometimes set both the start and the stop bits at one time. This can be easily reproduced by sending a simple read request like e.g struct i2c_msg msgs[] = { { addr, 0, 1, buf }, { addr, I2C_M_RD, offset, buf } }; While processing the first message the i2c_pnx_master_xmit will set both the start_bit and the stop_bit, which will eventually confuse the slave. Fixed by remove setting start/stop condition from the transmit routines. Signed-off-by: NLuotao Fu <l.fu@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Wolfgang Grandegger 提交于
This patch adds the MPC5121 to the list of supported devices, enhances the doc of the "clock-frequency" property and removes the obsolete "cell-index", "device_type" and "fsl-i2c" property. Furthermore an example for the MPC5121 has been added. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Wolfgang Grandegger 提交于
As I2C interrupts must be enabled for the MPC512x by the setup function as well, "fsl,preserve-clocking" is handled in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Wolfgang Grandegger 提交于
To prepare support for the MPC512x processors from Freescale the "setclock" initialization functions have been renamed to "setup" because I2C interrupts must be enabled for the MPC512x by this function as well. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Wolfgang Grandegger 提交于
"__devinit[data]" has not yet been used for all initialization functions and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has been renamed to "mpc_i2c_data", which is even the better name. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Uwe Kleine-König 提交于
Having a pointer to the probe function is unnecessary when using platform_driver_probe and yields a section mismatch warning after removing the white list entry "*driver" for { .data$, .data.rel$ } -> { .init.* } mismatches in modpost. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 srinidhi kasagar 提交于
This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Reviewed-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Peter Huewe 提交于
This patch fixes a build failure[1], by adding the missing semaphore.h include References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2234322/Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Randy Dunlap 提交于
LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Samuel Ortiz 提交于
We need to check for gpiochip_remove() errors. Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Denis Turischev 提交于
Signed-off-by: NDenis Turischev <denis@compulab.co.il> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Denis Turischev 提交于
Convert i2c-isch to platform_device for the lpc mfd core to add it at probe time. Signed-off-by: NDenis Turischev <denis@compulab.co.il> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the status of the AUXADC if we don't get a completion, mostly for systems that don't have the WM831x interrupt infrastructure hooked up. Also reduce the timeout for completion of conversions to 5ms from the previous 10ms, the lower timeout should be sufficient. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the state of the AUXADC if we don't get a completion, mostly for systems that don't have the WM8350 interrupt infrastructure hooked up. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mike Turquette 提交于
New function twl4030_remove_script(u8 flags) takes a script type as defined in twl.h and prevents any script already loaded in that position from running. This is accomplished by programming SEQ_ADD_* to 0x3f, the END_OF_SCRIPT value, where SEQ_ADD_* is determined by flags. (Future) users of this function include OMAP board files for machines facing a race condition between sleep and warm reset. Signed-off-by: NMike Turquette <mturquette@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-