AGP mappings are not cache coherent, so userptr support
won't work. Additional to that the AGP implementation uses
a different ttm_tt container structure so we run into
problems if we cast the pointer without checking if it's
the right type.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit "drm/rcar-du: Use struct videomode in platform data" touches board code
in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of
conflict for v3.18. Simon, are you fine with getting those changes merged
through Dave's tree (and could you confirm that no conflict should occur) ?

Simon acked the merge:
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm/rcar-du: Add OF support
  drm/rcar-du: Use struct videomode in platform data
  video: Add DT bindings for the R-Car Display Unit
  video: Add THC63LVDM83D DT bindings documentation
  video: Add ADV7123 DT bindings documentation
  video: Add DT binding documentation for VGA connector
  devicetree: Add vendor prefix "thine" to vendor-prefixes.txt
  devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt
  drm/shmob: Update copyright notice
  drm/rcar-du: Update copyright notice

While zone->name is currently hard coded, the call to kobject_init_and_add()
should follow the more defensive argument list usage (as already done in
other places in ttm_memory.c) where "%s" is used instead of directly passing
in a variable as a format string.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In order to support the "enable GPIO" available in many panel devices,
this commit adds a proper devicetree binding.

By providing an enable GPIO in the devicetree, the driver can now turn
off and on the panel device, and/or the backlight device. Both the
backlight and the GPIO are optional properties.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of setting an initial value for the return code, set it explicitly
on each error path. This is just a cosmetic cleanup, as preparation for the
enable GPIO support.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The current backlight support is broken; the driver expects a backlight-class
in the panel devicetree node. Fix this by implementing it properly, getting
an optional backlight from a phandle.

This shouldn't cause any backward-compatibility DT issue because the current
implementation doesn't work and is not even documented.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using the managed variant to allocate the resource makes the code simpler
and less error-prone.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Just a cosmetic cleanup.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Just a trivial cleanup to remove the variable.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This commit adds the missing calls to of_node_put to release the node
that's currently held by the of_get_child_by_name() call in the panel
info parsing code.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().

To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
  drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
  from Chris
- move w/a for registers which are stored in the hw context to the context init
  code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
  from Chris
- small things all over, as usual

* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
  drm/i915: Update DRIVER_DATE to 20140905
  drm/i915: Decouple the stuck pageflip on modeset
  drm/i915: Check for a stalled page flip after each vblank
  drm/i915: Introduce a for_each_plane() macro
  drm/i915: Rewrite ABS_DIFF() in a safer manner
  drm/i915: Add comments explaining the vdd on/off functions
  drm/i915: Move DP port disable to post_disable for pch platforms
  drm/i915: Enable DP port earlier
  drm/i915: Turn on panel power before doing aux transfers
  drm/i915: Be more careful when picking the initial power sequencer pipe
  drm/i915: Reset power sequencer pipe tracking when disp2d is off
  drm/i915: Track which port is using which pipe's power sequencer
  drm/i915: Fix edp vdd locking
  drm/i915: Reset the HEAD pointer for the ring after writing START
  drm/i915: Fix unsafe vma iteration in i915_drop_caches
  drm/i915: init sprites with univeral plane init function
  drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
  drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
  drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
  drm/i915: Don't call gen8_fbc_sw_flush() on chv
  ...

Pull in first set of changes from Ben for ast on ppc.

I've done a quick boot test on x86 and it still seems to boot.

* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
  drm/ast: Cleanup analog init code path
  drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
  drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
  drm/ast: POST chip at probe time if VGA not enabled
  drm/ast: Try to use MMIO registers when PIO isn't supported

Signed-off-by: NEgbert Eich <eich@suse.com>
Tested-by: NSteven You2 Liang <liangyou2@lenovo.com>
Signed-off-by: NY.C. Chen <yc_chen@aspeedtech.com>

v3: based on [PATCH 1/2] drm/ast: Add missing entry to dclk_table[].
    Add reduced blanking modes, improve mode matching to
    identify these modes by thier sync polarities.

[airlied: argh whitespace damage]
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is requested to get the fixes for intel and radeon into the
same tree for future development work.

i915_display.c: fix missing dev_priv conflict.

This is the main merge request for Nouveau 3.18, overview:
- various bits of roy's gt21x clock work
- various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs)
- misc fan control improvements
- kepler hdmi infoframe fixes
- dp audio
- l2 cache + cbc improvements

* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
  drm/gt214-/disp: enable dp audio
  drm/gt214-/kms: fix hda eld regression
  drm/g94-/disp: calculate some dp audio constants
  drm/gt214-/kms: perform hda codec setup on displayport too
  drm/gk104-/disp: infoframe registers moved yet again on kepler
  drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
  drm/nva3/fb/ram: Per-partition regs
  drm/nouveau/fb/ram: Support strided regs
  drm/nv50/fb/ram: Store the number of partitions in the designated fields
  drm/nv50/kms: Set VBLANK time in modeset script
  drm/nouveau/bios: Add rammap support for version 1.0
  drm/gf100-/pwr/memx: block host and fifo around reclock
  drm/nouveau/pwr/memx: fix command ordering around block/unblock
  drm/nouveau/pwr/memx: rename fb off/on to block/unblock
  drm/nva3/clk: Pause the GPU before reclocking
  drm/nouveau/gpio: rename g92 class to g94
  drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
  drm/gk104/fb/ram: twiddle some more bits when reclocking
  drm/nouveau/bios: parse another large chunk of random memory config data
  drm/gk104-/fb/ram: perform certain steps only when bios data differs
  ...

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

NVIDIA appear to have tweaked the algorithm from GF110, this implements
the previous algorithm for them still.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Thanks to Vincent Pelletier for pointing this out and providing a proof of
concept patch on the list.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Done after discussion with Roy.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Solves blinking on reclocking memory. The value set is an underestimate, but
with non-reduced vblanking this should give us plenty of time
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

More accurate as to the function of the opcodes.  Not only is FB disabled,
but the host is prevented from touching the GPU.  An upcoming patch for
Kepler will also halt PFIFO (as NVIDIA does).
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

V2: always call post correctly even if pre fails
V3: move function prototype to nva3.h
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>

nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with

commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Mon May 12 15:22:42 2014 +1000

    gpio: split g92 class from nv50

Reported-by: estece on #nouveau
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

*when* this is done is only a rough approximation of what the binary driver
does.. need to investigate more to see if it matters
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Awful, awful.  But, on the GK106 I have, some upcoming patches show
that this is actually necessary after all.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All the other chipsets should be moved over to this too.  It's not needed
yet for the upcoming commits, so left this step as it'll conflict badly
with Roy's GT21x reclocking work.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes type/mask calculation being based on uninitialised data for VGA
outputs.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>