- 13 5月, 2016 9 次提交
-
-
由 James Hogan 提交于
The CP0_EBase register may optionally have a write gate (WG) bit to allow the upper bits to be written, i.e. bits 31:30 on MIPS32 since r3 (to allow for an exception base outside of KSeg0/KSeg1 when segmentation control is in use) and bits 63:30 on MIPS64 (which also implies the extension of CP0_EBase to 64 bits long). The presence of this feature will need to be known about for VZ support in order to correctly save and restore all the bits of the guest CP0_EBase register, so add CPU feature definition and probing for this feature. Probing the WG bit on MIPS64 can be a bit fiddly, since 64-bit COP0 register access instructions were UNDEFINED for 32-bit registers prior to MIPS r6, and it'd be nice to be able to probe without clobbering the existing state, so there are 3 potential paths: - If we do a 32-bit read of CP0_EBase and the WG bit is already set, the register must be 64-bit. - On MIPS r6 we can do a 64-bit read-modify-write to set CP0_EBase.WG, since the upper bits will read 0 and be ignored on write if the register is 32-bit. - On pre-r6 cores, we do a 32-bit read-modify-write of CP0_EBase. This avoids the potentially UNDEFINED behaviour, but will clobber the upper 32-bits of CP0_EBase if it isn't a simple sign extension (which also requires us to ensure BEV=1 or modifying the exception base would be UNDEFINED too). It is hopefully unlikely a bootloader would set up CP0_EBase to a 64-bit segment and leave WG=0. [ralf@linux-mips.org: Resolved merge conflict.] Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Tested-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13223/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Add definitions for the bits & fields in the CP0_EBase register, and use them from a few different places in arch/mips which hardcoded these values. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13222/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Add definitions for the ASID field in CP0_EntryHi (along with the soon to be used ASIDX field), and use them in a few previously hardcoded cases. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13205/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huacai Chen 提交于
Loongson-3A R2 has pwbase/pwfield/pwsize/pwctl registers in CP0 (this is very similar to HTW) and lwdir/lwpte/lddir/ldpte instructions which can be used for fast TLB refill. [ralf@linux-mips.org: Resolve conflict.] Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12754/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huacai Chen 提交于
Loongson-2 has a 4 entry itlb which is a subset of jtlb, Loongson-3 has a 4 entry itlb and a 4 entry dtlb which are subsets of jtlb. We should write diag register to invalidate itlb/dtlb when flushing jtlb because itlb/dtlb are not totally transparent to software. For Loongson-3A R2 (and newer), we should invalidate ITLB, DTLB, VTLB and FTLB before we enable/disable FTLB. Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12753/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huacai Chen 提交于
Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Features of R2 revision of Loongson-3A: - Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache). - I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is 64 bytes. - 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way set-associative). - Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/ Execute-Inhibit. [ralf@linux-mips.org: Resolved merge conflicts.] Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12751/ Patchwork: https://patchwork.linux-mips.org/patch/13136/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
The files watch.c and ptrace.c contain various magic masks for WatchLo/WatchHi register fields. Add some definitions to mipsregs.h for these registers and make use of them in both watch.c and ptrace.c, hopefully making them more readable. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Reviewed-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12729/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
do_watch() clears bit 22 of cause without using a CAUSEF_* definition from mipsregs.h. Add a definition for this bit (CAUSEF_WP) and make use of it. Also use clear_c0_cause() instead of manual read/modify/write. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12728/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
MIPSr6 introduces support for "Virtual Processors", which are conceptually similar to VPEs from the now-deprecated MT ASE. Detect whether the system supports VPs using the VP bit in Config5, adding cpu_has_vp for use by later patches. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12327/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 1月, 2016 3 次提交
-
-
由 James Hogan 提交于
Add a few missing trap codes. [ralf@linux-mips.org: Drop removal of exception codes. I don't care what the incomplete architecture spec says; it can't change existing hardware and VCEI is supported indeed.] Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11890/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Move the Cause.ExcCode trap code definitions from kvm_host.h to mipsregs.h, since they describe architectural bits rather than KVM specific constants, and change the prefix from T_ to EXCCODE_. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11891/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
The CAUSEB_DC and CAUSEF_DC definitions used by KVM are defined in asm/kvm_host.h, but all the other Cause register field definitions are found in asm/mipsregs.h. Lets reunite the DC bit definitions with its friends in mipsregs.h. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11885/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 11 11月, 2015 3 次提交
-
-
由 Paul Burton 提交于
Tidy up the definition of the EntryLo RI & XI bits using BITS_PER_LONG rather than #ifdef'ing on CONFIG_64BIT, and add a definition for the offset to the PFN field for use by a later patch. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11217/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Provide support for outputting early debug information, in the form of various register values should an exception occur, during the early bringup of secondary cores. This code requires an ns16550-compatible UART accessible from the secondary core, and is written in assembly due to the environment in which such early exceptions occur where way may not have a stack, be coherent or even have initialised caches. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11202/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Remove the definition in locore.S and move a few of the other similar definitions in asm/mipsregs.h too. CP0_INTCTL, CP0_SRSCTL, & CP0_SRSMAP are unused so they're just dropped instead. CP0_DDATA_LO is left where it is as I have patches to eliminate its use in locore.S and it otherwise is unlikely to need to be used from assembly code. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11461/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 23 9月, 2015 1 次提交
-
-
由 James Hogan 提交于
Add cpu_has_ftlb, which specifies that an FTLB is present in addition to the VTLB, probed based on whether Config.MT == 4 (rather than 1 for standard JTLB). This is necessary since MIPS release 6 removes Config4.MMUExtDef, so the presence of the FTLB fields in Config4 must be determined from Config.MT instead. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11159/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 9月, 2015 3 次提交
-
-
由 James Hogan 提交于
The generic field definitions (i.e. present before MIPS32/MIPS64) in mipsregs.h are conventionally not prefixed with MIPS_, so rename the recently added MIPS_ENTRYLO_* definitions for the G, V, D, and C fields to ENTRYLO_*. Also rearrange to put the EntryLo and EntryHi definitions in the right place in the file. Fixes: 8ab6abcb ("MIPS: mipsregs.h: Add EntryLo bit definitions") Reported-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10725/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
These are bitfields and treating them as signed values doesn't make any sense. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Reported-by: NChris Packham <judge.packham@gmail.com>
-
由 Chris Packham 提交于
Update __read_32bit_c0_register() and __read_32bit_c0_ctrl_register() to use "unsigned int res;" instead of "int res;". There is little reason to treat these register values as signed. They are either counters (which by definition are unsigned) or are made up of various bit fields to be interpreted as per the CPU datasheet. This has come up via u-boot[1] which sync's asm/mipsregs.h with the kernel. In u-boots case the value read from read_c0_count() is assigned to an unsigned long [2] which triggers a sign extension and causes a bug. U-boot should probably be more explicit about the types used for the timer_read_counter() API but that aside is there any reason to treat these values as signed integers? A quick grep around the arch/mips makes me thing that there may be some bugs lurking when read_c0_count() starts to yield a negative value but I haven't really explored any of them. [1] - http://lists.denx.de/pipermail/u-boot/2015-July/219086.html [2] - http://git.denx.de/?p=u-boot.git;a=blob;f=arch/mips/cpu/time.c#l11Signed-off-by: NChris Packham <judge.packham@gmail.com> Cc: linux-mips@linux-mips.org Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Chris Packham <judge.packham@gmail.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10718/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 26 8月, 2015 1 次提交
-
-
由 Markos Chandras 提交于
Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10652/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 22 6月, 2015 2 次提交
-
-
由 Joshua Kinard 提交于
The R12000 added a new feature to enhance branch prediction called "global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM), Coprocessor 0, Diagnostic Register (22): """ If bit 26 is set, branch prediction uses all eight bits of the global history register. If bit 26 is not set, then bits 25:23 specify a count of the number of bits of global history to be used. Thus if bits 26:23 are all zero, global history is disabled. The global history contains a record of the taken/not-taken status of recently executed branches, and when used is XOR'ed with the PC of a branch being predicted to produce a hashed value for indexing the BPT. Some programs with small "working set of conditional branches" benefit significantly from the use of such hashing, some see slight performance degradation. """ This patch enables global history on R12000 CPUs and up by setting bit 26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits 25:23 are left alone so that all eight bits of the global history register are available for branch prediction. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Add definitions for EntryLo register bits in mipsregs.h. The R4000 compatible ones are prefixed MIPS_ENTRYLO_ and the R3000 compatible ones are prefixed R3K_ENTRYLO_. These will be used in later patches. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/10073/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 4月, 2015 6 次提交
-
-
由 Maciej W. Rozycki 提交于
Define IEEE 754-2008 feature control bits: FIR.HAS2008, FCSR.ABS2008 and FCSR.NAN2008, and update the `_ieee754_csr' structure accordingly. For completeness define FIR.UFRP too. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9709/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Implement the FCCR, FEXR and FENR "shadow" FPU registers for the architecture levels that include them, for the CFC1 and CTC1 instructions in the full emulation mode. For completeness add macros for the CP1 UFR and UNFR registers too, no actual implementation though. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9708/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Reindent CP0 Cause macros for a single space after #define, leaving extra indentation for individual Interrupt Pending bits as with CP0 Status register's Interrupt Mask bits. [ralf@linux-mips.org: Fix conflict.] [ralf@linux-mips.org: Fix indentation of the CAUSEB_FDCI and CAUSEF_FDCI definitions.] Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9669/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
TX39 CP0 Configuration Register 3 macro definitions have been randomly thrown in the middle of a block of CP0 Status register value macros. Move them to the end of the whole CP0 register value macro block, complementing the location of the TX39 Cache register name macro at the end of the CP0 register name macro block. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9668/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Originally CP1 macros were placed between CP0 register name macros and CP0 register value macros. As changes were applied to the header the position of CP1 macros gradually has become more and more arbitrary and two separate blocks were created. This may only cause confusion. Move them out of the way then and place together after all the CP0 macros. No semantic change. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9667/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Remove a duplicate FPU Status Register reference that has been there since forever and a mistakenly copied and pasted R4xx0 manual reference. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9666/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 31 3月, 2015 2 次提交
-
-
由 James Hogan 提交于
Add architectural field definitions relating to the Fast Debug Channel (FDC) interrupt, namely the pending bit in Cause and the field in IntCtl to specify which CPU IRQ line the FDC interrupt is routed to. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9139/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Add architectural definitions and probing for the MIPS Common Device Memory Map (CDMM) region. When supported and enabled at a particular physical address, this region allows some number of per-CPU devices to be discovered and controlled via MMIO. A bit exists in Config3 to determine whether the feature is present, and a CDMMBase CP0 register allows the region to be enabled at a particular physical address. [ralf@linux-mips.org: Sort conflict with other patches.] Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9178/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 2月, 2015 1 次提交
-
-
由 Steven J. Hill 提交于
Build set and clear macros for the PageGrain register. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 2月, 2015 2 次提交
-
-
由 Markos Chandras 提交于
If Config5/LLB is set in the core, then software can write the LLB bit in the LLADDR register. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
-
由 Markos Chandras 提交于
The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
-
- 31 1月, 2015 1 次提交
-
-
由 James Hogan 提交于
Add a write_32bit_cp1_register() macro to compliment the read_32bit_cp1_register() macro. This is to abstract whether .set hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT. The implementation of _read_32bit_cp1_register() .sets mips1 due to failure of gas v2.19 to assemble cfc1 for Octeon (see commit 25c30003 ("MIPS: Override assembler target architecture for octeon.")). I haven't copied this over to _write_32bit_cp1_register() as I'm uncertain whether it applies to ctc1 too, or whether anybody cares about that version of binutils any longer. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9172/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 25 11月, 2014 1 次提交
-
-
由 Steven J. Hill 提交于
Add read/write macros to access the upper bits of the extended EntryLo0 and EntryLo1 registers used by XPA. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8455/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 11月, 2014 2 次提交
-
-
由 Paul Burton 提交于
Add definitions for the FRE & UFE bits in Config5, and the FREP bit in FPIR. These bits are used to support a hybrid FPR scheme allowing a mixture of FP32 & FP64 code to execute within a task. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7674/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Make use of the Config6/FLTBP bit to set the probability of a TLBWR instruction to hit the FTLB or the VTLB. A value of 0 (which may be the default value on certain cores, such as proAptiv or P5600) means that a TLBWR instruction will never hit the VTLB which leads to performance limitations since it effectively decreases the number of available TLB slots. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8368/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 07 11月, 2014 1 次提交
-
-
由 Manuel Lauss 提交于
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 02 8月, 2014 2 次提交
-
-
由 Dan Carpenter 提交于
The MIPS_CONF4_FTLBSETS_SHIFT define is cut and pasted twice so we can remove the second define. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7063/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Add accessor macros for the Memory Accessibility Attribute Registers (MAARs), the bits contained within the MAARs & the Config5.MRP bit indicating their presence. The only current use of the MAARs is to enable speculative accesses to regions of memory. Besides the potential performance benefits of speculative accesses, they are a requirement for the P5600 core to handle non-128b-aligned MSA vector loads & stores rather than generating an address error. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7329/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-