As per the documentation of powercap sysfs, energy_uj field is read only,
if it can't be reset. Currently it always allows write but will fail,
if there is no reset callback.
Changing mode field, to read only if there is no reset callback.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On returning from hibernation 'restore' callback is called,
not 'resume'.  Fix it.

Fixes: eaf140b6 (PNP: convert PNP driver bus legacy pm_ops to dev_pm_ops)
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We shouldn't kfree(fbi) because that was allocated with devm_kzalloc().
There were several error paths which returned directly instead of
releasing resources.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add missing module device table which is needed for module autoloading.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If not, we could end up in the unfortunate situation where
we dereference a NULL pointer b/c we have cpuidle disabled.

This is the case when booting under Xen (which uses the
ACPI P/C states but disables the CPU idle driver) - and can
be easily reproduced when booting with cpuidle.off=1.

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff8156db4a>] cpuidle_unregister_device+0x2a/0x90
.. snip..
Call Trace:
 [<ffffffff813b15b4>] acpi_processor_power_exit+0x3c/0x5c
 [<ffffffff813af0a9>] acpi_processor_stop+0x61/0xb6
 [<ffffffff814215bf>] __device_release_driver+0fffff81421653>] device_release_driver+0x23/0x30
 [<ffffffff81420ed8>] bus_remove_device+0x108/0x180
 [<ffffffff8141d9d9>] device_del+0x129/0x1c0
 [<ffffffff813cb4b0>] ? unregister_xenbus_watch+0x1f0/0x1f0
 [<ffffffff8141da8e>] device_unregister+0x1e/0x60
 [<ffffffff814243e9>] unregister_cpu+0x39/0x60
 [<ffffffff81019e03>] arch_unregister_cpu+0x23/0x30
 [<ffffffff813c3c51>] handle_vcpu_hotplug_event+0xc1/0xe0
 [<ffffffff813cb4f5>] xenwatch_thread+0x45/0x120
 [<ffffffff810af010>] ? abort_exclusive_wait+0xb0/0xb0
 [<ffffffff8108ec42>] kthread+0xd2/0xf0
 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180
 [<ffffffff816ce17c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180

This problem also appears in 3.12 and could be a candidate for backport.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch fixes a crash when tried setting symbolic name for an offline
vport through sysfs. Crash is due to uninitialized pointer lport->ns,
which gets initialized only on linkup (port online).
Signed-off-by: NVijaya Mohan Guvva <vmohan@brocade.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This is effectively a revert of commit 5302c3fb ("cpufreq: Perform
light-weight init/teardown during suspend/resume"), which enabled
suspend/resume optimizations leaving the sysfs files in place.

Errors during suspend/resume are not handled properly, leaving
dead sysfs attributes in case of failures.  There are are number of
functions with special code for the "frozen" case, and all these
need to also have special error handling.

The problem is easy to demonstrate by making cpufreq_driver->init()
or cpufreq_driver->get() fail during resume.

The code is too complex for a simple fix, with split code paths
in multiple blocks within a number of functions.  It is therefore
best to revert the patch enabling this code until the error handling
is in place.

Examples of problems resulting from resume errors:

WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212()
missing sysfs attribute operations for kobject: (null)
Modules linked in: [stripped as irrelevant]
CPU: 0 PID: 6055 Comm: grep Tainted: G      D      3.13.0-rc2 #153
Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011
 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006
 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000
 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310
Call Trace:
 [<ffffffff81380b0e>] dump_stack+0x55/0x76
 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96
 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212
 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82
 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212
 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212
 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac
 [<ffffffff81122562>] do_dentry_open+0x17c/0x257
 [<ffffffff8112267e>] finish_open+0x41/0x4f
 [<ffffffff81130225>] do_last+0x80c/0x9ba
 [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42
 [<ffffffff81130606>] path_openat+0x233/0x4a1
 [<ffffffff81130b7e>] do_filp_open+0x35/0x85
 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184
 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa
 [<ffffffff811233a7>] SyS_openat+0xf/0x11
 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b

The failure to restore cpufreq devices on cancelled hibernation is
not a new bug. It is caused by the ACPI _PPC call failing unless the
hibernate is completed. This makes the acpi_cpufreq driver fail its
init.

Previously, the cpufreq device could be restored by offlining the
cpu temporarily.  And as a complete hibernation cycle would do this,
it would be automatically restored most of the time.  But after
commit 5302c3fb the leftover sysfs attributes will block any
device add action.  Therefore offlining and onlining CPU 1 will no
longer restore the cpufreq object, and a complete suspend/resume
cycle will replace it with garbage.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It's the drivers responsibility to react on failure to get
the gpio descriptors and not the frameworks. Since there are
some common peripherals that may or may not have certain
pins connected to gpio lines, depending on the platform,
printing the warning there may end up generating useless bug
reports.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But the code may give the
wrong status of GPIOs defined as input under some scenarios:

1. If some pins were configured as inputs and were asserted
high before booting the kernel, the shadow data has been
initialized with those pin values.
2. Some pins have been configured as output first and have
been set to the high value, then reconfigured as input.

The above cases will make the shadow data for those input
pins to be set to high. Then reading the pin status will
always return high even if the actual pin status is low.

The code should eliminate the effects of the shadow data to
the input pins, and the status of those pins should be
read directly from GPDAT.

Cc: stable@vger.kernel.org
Acked-by: NScott Wood <scottwood@freescale.com>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

For platforms that use device tree or ACPI as the standard way to look
GPIOs up, allow the platform-defined GPIO mappings to be used as a
fallback. This may be useful for platforms that need extra GPIOs mappings
not defined by the firmware.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

A typo resulted in GPIO lookup failing unconditionally.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reported-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When computing the pin configuration register offset the bias setup code
erroneously compares the pin number range with the loop index instead of
the pin number. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When computing the pin configuration register offset the bias setup code
erroneously compares the pin number range with the loop index instead of
the pin number. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We need to make sure that the error code from devm_of_pwm_get() is the one
the module returns in case of failure.
Restructure the code to make this possible for DT booted case.
With this patch the driver can ask for deferred probing when the board is
booted with DT.
Fixes for example omap4-sdp board's keyboard backlight led.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

In commit 7314e613 ("Fix a few incorrectly checked
[io_]remap_pfn_range() calls") the uio driver started more properly
checking the passed-in user mapping arguments against the size of the
actual uio driver data.

That in turn exposed that some driver authors apparently didn't realize
that mmap can only work on a page granularity, and had tried to use it
with smaller mappings, with the new size check catching that out.

So since it's not just the user mmap() arguments that can be confused,
make the uio mmap code also verify that the uio driver has the memory
allocated at page boundaries in order for mmap to work.  If the device
memory isn't properly aligned, we return

  [ENODEV]
    The fildes argument refers to a file whose type is not supported by mmap().

as per the open group documentation on mmap.
Reported-by: NHolger Brunck <holger.brunck@keymile.com>
Acked-by: NGreg KH <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bug report from: wenxiong@linux.vnet.ibm.com

The issue is happened in dual controller configuration. We got the
sysfs warnings when rmmod the ipr module.

enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister()
for each componment deivce, device_unregister() ->device_del()->kobject_del()
->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL.

For each componment device,
enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link()
in which checking kobj->sd again, it has been set as NULL when doing
device_unregister. So we saw all these sysfs WARNING.

Tested-by: wenxiong@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When multiple vectors are used, the vector variable is over written,
resulting in unhandled operation for those vectors.
This fix prevents the problem by maitaining HBA instance and
vector values for each irq.

[jejb: checkpatch fixes]
Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Setting the phy state for hard reset response.
After sending hard reset for a device ,phy down event sets
the phy state to zero but for phy up event it will not set
the phy state again.This will cause problem to successive
hard resets.

Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

In case of direct attached SATA device delay is not enough.
It will give crash for set device state command response and
wait_for_completion is the best solution for this.

Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fix a trivial typo.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Remove waiting for TX queues to become empty during selftest.
This check is not necessary for any purpose, and might put
the driver into an infinite loop.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

receive mergeable now handles errors internally.
Do same for big and small packet paths, otherwise
the logic is too hard to follow.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet noticed that if we encounter an error
when processing a mergeable buffer, we don't
dequeue all of the buffers from this packet,
the result is almost sure to be loss of networking.

Jason Wang noticed that we also leak a page and that we don't decrement
the rq buf count, so we won't repost buffers (a resource leak).

Fix both issues.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael Dalton <mwdalton@google.com>
Reported-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A return value of 1 is interpreted as an error.  See pci_driver.
in local_pci_probe().  If you're wondering how this ever could
have worked, it's because it used to be the case that only return
values less than zero were interpreted as failure.  But even in
the current kernel if the driver registers its various entry
points with the kernel, and then returns a value which is
interpreted as failure, those registrations aren't undone, so
the driver still mostly works.  However, the driver's remove
function wouldn't be called on rmmod, and pci power management
functions wouldn't work.  In the case of Smart Array, since it
has a battery backed cache (or else no cache) even if the driver
is not shut down properly as long as there is no outstanding
i/o, nothing too bad happens, which is why it took so long to
notice.

Requesting backport to stable because the change to pci-driver.c
which requires driver probe functions to return 0 occurred between
2.6.35 and 2.6.36 (the pci power management breakage) and again
between 3.7 and 3.8 (pci_dev->driver getting set to NULL in
local_pci_probe() preventing driver remove function from being
called on rmmod.)
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

We inadvertantly discarded the scsi status for aborted commands.
For some commands (e.g. reads from tape drives) these can't be retried,
and if we discarded the scsi status, the scsi mid layer couldn't notice
anything was wrong and the error was not reported.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

"MAC filter" sounds more reasonable than "MAC fitler".
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct a namespace complaint by making the function static
and moving the prototype into the .c file.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

NETIF_F_HW_L2FW_DOFFLOAD allows upper layer net devices such
as macvlan to use queues in the hardware to directly submit and
receive skbs.

This creates a subtle change in the datapath though. One change
being the skb may no longer use the root devices qdisc.

Because users may not expect this we can't enable the feature
by default unless the hardware can offload all the software
functionality above it. So for now disable it by default and
let users opt in.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When compiling with -Wstrict-prototypes gcc catches a static
I missed.

./ixgbe_main.c:4254: warning: no previous prototype for 'ixgbe_fwd_ring_down'
Reported-by: NPhillip Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

On e1000_down(), we should ensure every asynchronous work is canceled
before proceeding. Since the watchdog_task can schedule other works
apart from itself, it should be stopped first, but currently it is
stopped after the reset_task. This can result in the following race
leading to the reset_task running after the module unload:

e1000_down_and_stop():			e1000_watchdog():
----------------------			-----------------

cancel_work_sync(reset_task)
					schedule_work(reset_task)
cancel_delayed_work_sync(watchdog_task)

The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning
of e1000_down_and_stop() thus ensuring the race is impossible.

Cc: Tushar Dave <tushar.n.dave@intel.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The patch fixes the following lockdep warning, which is 100%
reproducible on network restart:

======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0+ #47 Tainted: GF
-------------------------------------------------------
kworker/1:1/27 is trying to acquire lock:
 ((&(&adapter->watchdog_task)->work)){+.+...}, at: [<ffffffff8108a5b0>] flush_work+0x0/0x70

but task is already holding lock:
 (&adapter->mutex){+.+...}, at: [<ffffffffa0177c0a>] e1000_reset_task+0x4a/0xa0 [e1000]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&adapter->mutex){+.+...}:
       [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
       [<ffffffff816b8cbc>] mutex_lock_nested+0x4c/0x390
       [<ffffffffa017233d>] e1000_watchdog+0x7d/0x5b0 [e1000]
       [<ffffffff8108b972>] process_one_work+0x1d2/0x510
       [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
       [<ffffffff81092c1e>] kthread+0xee/0x110
       [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0

-> #0 ((&(&adapter->watchdog_task)->work)){+.+...}:
       [<ffffffff810bd9c0>] __lock_acquire+0x1710/0x1810
       [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
       [<ffffffff8108a5eb>] flush_work+0x3b/0x70
       [<ffffffff8108b5d8>] __cancel_work_timer+0x98/0x140
       [<ffffffff8108b693>] cancel_delayed_work_sync+0x13/0x20
       [<ffffffffa0170cec>] e1000_down_and_stop+0x3c/0x60 [e1000]
       [<ffffffffa01775b1>] e1000_down+0x131/0x220 [e1000]
       [<ffffffffa0177c12>] e1000_reset_task+0x52/0xa0 [e1000]
       [<ffffffff8108b972>] process_one_work+0x1d2/0x510
       [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
       [<ffffffff81092c1e>] kthread+0xee/0x110
       [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&adapter->mutex);
                               lock((&(&adapter->watchdog_task)->work));
                               lock(&adapter->mutex);
  lock((&(&adapter->watchdog_task)->work));

 *** DEADLOCK ***

3 locks held by kworker/1:1/27:
 #0:  (events){.+.+.+}, at: [<ffffffff8108b906>] process_one_work+0x166/0x510
 #1:  ((&adapter->reset_task)){+.+...}, at: [<ffffffff8108b906>] process_one_work+0x166/0x510
 #2:  (&adapter->mutex){+.+...}, at: [<ffffffffa0177c0a>] e1000_reset_task+0x4a/0xa0 [e1000]

stack backtrace:
CPU: 1 PID: 27 Comm: kworker/1:1 Tainted: GF            3.12.0+ #47
Hardware name: System manufacturer System Product Name/P5B-VM SE, BIOS 0501    05/31/2007
Workqueue: events e1000_reset_task [e1000]
 ffffffff820f6000 ffff88007b9dba98 ffffffff816b54a2 0000000000000002
 ffffffff820f5e50 ffff88007b9dbae8 ffffffff810ba936 ffff88007b9dbac8
 ffff88007b9dbb48 ffff88007b9d8f00 ffff88007b9d8780 ffff88007b9d8f00
Call Trace:
 [<ffffffff816b54a2>] dump_stack+0x49/0x5f
 [<ffffffff810ba936>] print_circular_bug+0x216/0x310
 [<ffffffff810bd9c0>] __lock_acquire+0x1710/0x1810
 [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
 [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
 [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
 [<ffffffff8108a5eb>] flush_work+0x3b/0x70
 [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
 [<ffffffff8108b5d8>] __cancel_work_timer+0x98/0x140
 [<ffffffff8108b693>] cancel_delayed_work_sync+0x13/0x20
 [<ffffffffa0170cec>] e1000_down_and_stop+0x3c/0x60 [e1000]
 [<ffffffffa01775b1>] e1000_down+0x131/0x220 [e1000]
 [<ffffffffa0177c12>] e1000_reset_task+0x52/0xa0 [e1000]
 [<ffffffff8108b972>] process_one_work+0x1d2/0x510
 [<ffffffff8108b906>] ? process_one_work+0x166/0x510
 [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
 [<ffffffff8108c960>] ? manage_workers+0x2c0/0x2c0
 [<ffffffff81092c1e>] kthread+0xee/0x110
 [<ffffffff81092b30>] ? __init_kthread_worker+0x70/0x70
 [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0
 [<ffffffff81092b30>] ? __init_kthread_worker+0x70/0x70

== The issue background ==

The problem occurs, because e1000_down(), which is called under
adapter->mutex by e1000_reset_task(), tries to synchronously cancel
e1000 auxiliary works (reset_task, watchdog_task, phy_info_task,
fifo_stall_task), which take adapter->mutex in their handlers. So the
question is what does adapter->mutex protect there?

The adapter->mutex was introduced by commit 0ef4ee ("e1000: convert to
private mutex from rtnl") as a replacement for rtnl_lock() taken in the
asynchronous handlers. It targeted on fixing a similar lockdep warning
issued when e1000_down() was called under rtnl_lock(), and it fixed it,
but unfortunately it introduced the lockdep warning described above.
Anyway, that said the source of this bug is that the asynchronous works
were made to take rtnl_lock() some time ago, so let's look deeper and
find why it was added there.

The rtnl_lock() was added to asynchronous handlers by commit 338c15
("e1000: fix occasional panic on unload") in order to prevent
asynchronous handlers from execution after the module is unloaded
(e1000_down() is called) as it follows from the comment to the commit:

> Net drivers in general have an issue where timers fired
> by mod_timer or work threads with schedule_work are running
> outside of the rtnl_lock.
>
> With no other lock protection these routines are vulnerable
> to races with driver unload or reset paths.
>
> The longer term solution to this might be a redesign with
> safer locks being taken in the driver to guarantee no
> reentrance, but for now a safe and effective fix is
> to take the rtnl_lock in these routines.

I'm not sure if this locking scheme fixed the problem or just made it
unlikely, although I incline to the latter. Anyway, this was long time
ago when e1000 auxiliary works were implemented as timers scheduling
real work handlers in their routines. The e1000_down() function only
canceled the timers, but left the real handlers running if they were
running, which could result in work execution after module unload.
Today, the e1000 driver uses sane delayed works instead of the pair
timer+work to implement its delayed asynchronous handlers, and the
e1000_down() synchronously cancels all the works so that the problem
that commit 338c15 tried to cope with disappeared, and we don't need any
locks in the handlers any more. Moreover, any locking there can
potentially result in a deadlock.

So, this patch reverts commits 0ef4ee and 338c15.

Fixes: 0ef4eedc ("e1000: convert to private mutex from rtnl")
Fixes: 338c15e4 ("e1000: fix occasional panic on unload")
Cc: Tushar Dave <tushar.n.dave@intel.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change is based on a similar change made to e1000e support in
commit bb9e44d0 ("e1000e: prevent oops when adapter is being closed
and reset simultaneously").  The same issue has also been observed
on the older e1000 cards.

Here, we have increased the RESET_COUNT value to 50 because there are too
many accesses to e1000 nic on stress tests to e1000 nic, it is not enough
to set RESET_COUT 25. Experimentation has shown that it is enough to set
RESET_COUNT 50.
Signed-off-by: Nyzhu1 <yanjun.zhu@windriver.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes Wake on LAN being reported as supported on some Ethernet
ports, in contrary to Hardware capability.
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When user linkup is enabled and user sets linkup of individual port,
we need to recompute linkup (carrier) of master interface so the change
is reflected. Fix this by calling __team_carrier_check() which does the
needed work.

Please apply to all stable kernels as well. Thanks.
Reported-by: NJan Tluka <jtluka@redhat.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the code. Avoid race conditions caused by attributes
being created after hwmon device registration. Implicitly
(through hwmon API) add mandatory 'name' sysfs attribute.
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit e9e4ea74
"net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
The Versatile SMSC LAN91C111 is crashing like this:

------------[ cut here ]------------
kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
PC is at smc_hardware_send_pkt+0x198/0x22c
LR is at smc_hardware_send_pkt+0x24/0x22c
pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
sp : c6cd1d08  ip : 00000001  fp : 00000000
r10: c02adb08  r9 : 00000000  r8 : c6ced802
r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 06cf4000  DAC: 00000015
Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
Stack: (0xc6cd1d08 to 0xc6cd2000)
1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
[<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
[<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
[<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
[<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
[<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
[<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
[<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
[<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
---[ end trace 81104fe70e8da7fe ]---
Kernel panic - not syncing: Fatal exception in interrupt

This is because the macro operations in smc91x.h defined
for Versatile are missing SMC_outsw() as used in this
commit.

The Versatile needs and uses the same accessors as the other
platforms in the first if(...) clause, just switch it to using
that and we have one problem less to worry about.

This includes a hunk of a patch from Will Deacon fixin
the other 32bit platforms as well: Innokom, Ramses, PXA,
PCM027.

Checkpatch complains about spacing, but I have opted to
follow the style of this .h-file.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit b268daff.

I applied the wrong version of this patch, the proper version
is coming up next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit e9e4ea74
"net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
The Versatile SMSC LAN91C111 is crashing like this:

------------[ cut here ]------------
kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
PC is at smc_hardware_send_pkt+0x198/0x22c
LR is at smc_hardware_send_pkt+0x24/0x22c
pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
sp : c6cd1d08  ip : 00000001  fp : 00000000
r10: c02adb08  r9 : 00000000  r8 : c6ced802
r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 06cf4000  DAC: 00000015
Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
Stack: (0xc6cd1d08 to 0xc6cd2000)
1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
[<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
[<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
[<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
[<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
[<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
[<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
[<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
[<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
---[ end trace 81104fe70e8da7fe ]---
Kernel panic - not syncing: Fatal exception in interrupt

This is because the macro operations in smc91x.h defined
for Versatile are missing SMC_outsw() as used in this
commit.

The Versatile needs and uses the same accessors as the other
platforms in the first if(...) clause, just switch it to using
that and we have one problem less to worry about.

Checkpatch complains about spacing, but I have opted to
follow the style of this .h-file.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using iperf to send packets(GSO mode is on), a bug is triggered:

[  212.672781] kernel BUG at lib/dynamic_queue_limits.c:26!
[  212.673396] invalid opcode: 0000 [#1] SMP
[  212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp]
[  212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G           O 3.12.0-0.7-default+ #16
[  212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000
[  212.676084] RIP: 0010:[<ffffffff8122e23f>]  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
[  212.676084] RSP: 0018:ffff880116e03e30  EFLAGS: 00010083
[  212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002
[  212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0
[  212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000
[  212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f
[  212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e
[  212.676084] FS:  00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000
[  212.676084] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0
[  212.676084] Stack:
[  212.676084]  ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8
[  212.676084]  ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000
[  212.676084]  00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8
[  212.676084] Call Trace:
[  212.676084]  <IRQ>
[  212.676084]  [<ffffffffa041509f>] cp_interrupt+0x4ef/0x590 [8139cp]
[  212.676084]  [<ffffffff81094c36>] ? ktime_get+0x56/0xd0
[  212.676084]  [<ffffffff8108cf73>] handle_irq_event_percpu+0x53/0x170
[  212.676084]  [<ffffffff8108d0cc>] handle_irq_event+0x3c/0x60
[  212.676084]  [<ffffffff8108fdb5>] handle_fasteoi_irq+0x55/0xf0
[  212.676084]  [<ffffffff810045df>] handle_irq+0x1f/0x30
[  212.676084]  [<ffffffff81003c8b>] do_IRQ+0x5b/0xe0
[  212.676084]  [<ffffffff8142beaa>] common_interrupt+0x6a/0x6a
[  212.676084]  <EOI>
[  212.676084]  [<ffffffffa0416a21>] ? cp_start_xmit+0x621/0x97c [8139cp]
[  212.676084]  [<ffffffffa0416a09>] ? cp_start_xmit+0x609/0x97c [8139cp]
[  212.676084]  [<ffffffff81378ed9>] dev_hard_start_xmit+0x2c9/0x550
[  212.676084]  [<ffffffff813960a9>] sch_direct_xmit+0x179/0x1d0
[  212.676084]  [<ffffffff813793f3>] dev_queue_xmit+0x293/0x440
[  212.676084]  [<ffffffff813b0e46>] ip_finish_output+0x236/0x450
[  212.676084]  [<ffffffff810e59e7>] ? __alloc_pages_nodemask+0x187/0xb10
[  212.676084]  [<ffffffff813b10e8>] ip_output+0x88/0x90
[  212.676084]  [<ffffffff813afa64>] ip_local_out+0x24/0x30
[  212.676084]  [<ffffffff813aff0d>] ip_queue_xmit+0x14d/0x3e0
[  212.676084]  [<ffffffff813c6fd1>] tcp_transmit_skb+0x501/0x840
[  212.676084]  [<ffffffff813c8323>] tcp_write_xmit+0x1e3/0xb20
[  212.676084]  [<ffffffff81363237>] ? skb_page_frag_refill+0x87/0xd0
[  212.676084]  [<ffffffff813c8c8b>] tcp_push_one+0x2b/0x40
[  212.676084]  [<ffffffff813bb7e6>] tcp_sendmsg+0x926/0xc90
[  212.676084]  [<ffffffff813e1d21>] inet_sendmsg+0x61/0xc0
[  212.676084]  [<ffffffff8135e861>] sock_aio_write+0x101/0x120
[  212.676084]  [<ffffffff81107cf1>] ? vma_adjust+0x2e1/0x5d0
[  212.676084]  [<ffffffff812163e0>] ? timerqueue_add+0x60/0xb0
[  212.676084]  [<ffffffff81130b60>] do_sync_write+0x60/0x90
[  212.676084]  [<ffffffff81130d44>] ? rw_verify_area+0x54/0xf0
[  212.676084]  [<ffffffff81130f66>] vfs_write+0x186/0x190
[  212.676084]  [<ffffffff811317fd>] SyS_write+0x5d/0xa0
[  212.676084]  [<ffffffff814321e2>] system_call_fastpath+0x16/0x1b
[  212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00
[  212.676084] RIP  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
------------[ cut here ]------------

When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx().
It's not the correct value(actually, it should plus skb->len once) and it
will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).
So only increase bytes_compl when finish sending all frags. pkts_compl also
has a wrong value, fix it too.

It's introduced by commit 871f0d4c ("8139cp: enable bql").
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>