Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 10 6月, 2013 1 次提交
  3. 14 5月, 2013 2 次提交
    • S
      powerpc/booke64: Fix kernel hangs at kernel_dbg_exc · 6cecf76b
      由 Scott Wood 提交于 
      MSR_DE is not cleared on entry to the kernel, and we don't clear it
explicitly outside of debug code.  If we have MSR_DE set in
prime_debug_regs(), and the new thread has events enabled in DBCR0
(e.g.  ICMP is set in thread->dbsr0, even though it was cleared in the
real DBCR0 when the thread got scheduled out), we'll end up taking a
debug exception in the kernel when DBCR0 is loaded.  DSRR0 will not
point to an exception vector, and the kernel ends up hanging at
kernel_dbg_exc.  Fix this by always clearing MSR_DE when we load new
debug state.

Another observed source of kernel_dbg_exc hangs is with the branch
taken event.  If this event is active, but we take a non-debug trap
(e.g. a TLB miss or an asynchronous interrupt) before the next branch.
We end up taking a branch-taken debug exception on the initial branch
instruction of the exception vector, but because the debug exception is
DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even
checking the DSRR0 address.  Fix this by checking for DBSR_BT as well
as DBSR_IC, which is what 32-bit does and what the comments suggest was
intended in the 64-bit code as well.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      6cecf76b
    • L
      powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again · af945cf4
      由 Li Zhong 提交于 
      Saw this warning again, and this time from the ret_from_fork path.

It seems we could clear the back chain earlier in copy_thread(), which
could cover both path, and also fix potential lockdep usage in
schedule_tail(), or exception occurred before we clear the back chain.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      af945cf4
  5. 01 5月, 2013 2 次提交
    • T
      dump_stack: unify debug information printed by show_regs() · a43cb95d
      由 Tejun Heo 提交于 
      show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[<ffffffff8234a07e>]  [<ffffffff8234a07e>] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [<ffffffff81000312>] do_one_initcall+0x122/0x170
  [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  [<ffffffff81c4776e>] kernel_init+0xe/0xf0
  [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>		[tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a43cb95d
    • T
      dump_stack: consolidate dump_stack() implementations and unify their behaviors · 196779b9
      由 Tejun Heo 提交于 
      Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [<ffffffff81c614dc>] dump_stack+0x19/0x1b
  [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8234a071>] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	[s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      196779b9
  7. 23 4月, 2013 1 次提交
  9. 10 4月, 2013 1 次提交
  11. 15 2月, 2013 4 次提交
  13. 29 1月, 2013 1 次提交
  15. 16 1月, 2013 1 次提交
  17. 10 1月, 2013 3 次提交
  19. 29 11月, 2012 2 次提交
  21. 22 10月, 2012 5 次提交
  23. 15 10月, 2012 2 次提交
  25. 01 10月, 2012 2 次提交
  27. 10 9月, 2012 1 次提交
  29. 05 9月, 2012 2 次提交
  31. 20 8月, 2012 1 次提交
    • F
      cputime: Consolidate vtime handling on context switch · baa36046
      由 Frederic Weisbecker 提交于 
      The archs that implement virtual cputime accounting all
flush the cputime of a task when it gets descheduled
and sometimes set up some ground initialization for the
next task to account its cputime.

These archs all put their own hooks in their context
switch callbacks and handle the off-case themselves.

Consolidate this by creating a new account_switch_vtime()
callback called in generic code right after a context switch
and that these archs must implement to flush the prev task
cputime and initialize the next task cputime related state.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
      baa36046
  33. 17 5月, 2012 1 次提交
    • S
      fork: move the real prepare_to_copy() users to arch_dup_task_struct() · 55ccf3fe
      由 Suresh Siddha 提交于 
      Historical prepare_to_copy() is mostly a no-op, duplicated for majority of
the architectures and the rest following the x86 model of flushing the extended
register state like fpu there.

Remove it and use the arch_dup_task_struct() instead.
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.comAcked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      55ccf3fe
  35. 08 5月, 2012 1 次提交
  37. 30 4月, 2012 1 次提交
    • A
      powerpc: Optimise enable_kernel_altivec · 35000870
      由 Anton Blanchard 提交于 
      Add two optimisations to enable_kernel_altivec:

- enable_kernel_altivec has already determined if we need to
save the previous task's state but we call giveup_altivec
in both cases, requiring an extra branch in giveup_altivec. Create
giveup_altivec_notask which only turns on the VMX bit in the
MSR.

- We write the VMX MSR bit each time we call enable_kernel_altivec
even it was already set. Check the bit and branch out if we have
already set it. The classic case for this is vectored IO
where we have to copy multiple buffers to or from userspace.

The following testcase was used to confirm this patch improves
performance:

http://ozlabs.org/~anton/junkcode/copy_to_user.c

Since the current breakpoint for using VMX in copy_tofrom_user is
4096 bytes, I'm using buffers of 4096 + 1 cacheline (4224) bytes.
A benchmark of 16 entry readvs (-s 16):

time copy_to_user -l 4224 -s 16 -i 1000000

completes 5.2% faster on a POWER7 PS700.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      35000870
  39. 11 4月, 2012 1 次提交
  41. 29 3月, 2012 1 次提交
  43. 09 3月, 2012 2 次提交
    • B
      powerpc: Rework lazy-interrupt handling · 7230c564
      由 Benjamin Herrenschmidt 提交于 
      The current implementation of lazy interrupts handling has some
issues that this tries to address.

We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.

The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.

Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.

This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.

The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.

When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.

We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).

This removes the need to play with the decrementer to try to create
fake interrupts, among others.

In addition, this adds a few refinements:

 - We no longer  hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.

 - Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.

 - On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)

 - We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.

Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

v2:

- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
  to retrigger an interrupt without preventing hard-enable

v3:

 - Fix or vs. ori bug on Book3E
 - Fix enabling of interrupts for some exceptions on Book3E

v4:

 - Fix resend of doorbells on return from interrupt on Book3E

v5:

 - Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.

v6:
 - 32-bit compile fix
 - more compile fixes with various .config combos
 - factor out the asm code to soft-disable interrupts
 - remove the C wrapper around preempt_schedule_irq

v7:
 - Fix a bug with hard irq state tracking on native power7
      7230c564
    • B
      powerpc: Rework runlatch code · fe1952fc
      由 Benjamin Herrenschmidt 提交于 
      This moves the inlines into system.h and changes the runlatch
code to use the thread local flags (non-atomic) rather than
the TIF flags (atomic) to keep track of the latch state.

The code to turn it back on in an asynchronous interrupt is
now simplified and partially inlined.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      fe1952fc
  45. 16 2月, 2012 1 次提交
    • I
      powerpc: Fix kernel log of oops/panic instruction dump · 40c8cefa
      由 Ira Snyder 提交于 
      A kernel oops/panic prints an instruction dump showing several
instructions before and after the instruction which caused the
oops/panic.

The code intended that the faulting instruction be enclosed in angle
brackets, however a bug caused the faulting instruction to be
interpreted by printk() as the message log level.

To fix this, the KERN_CONT log level is added before the actual text of
the printed message.

=== Before the patch ===

[ 1081.587266] Instruction dump:
[ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001
[ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000
[ 1081.602500]  4e800020 3803ffd0 2b800009

<4>[ 1081.587266] Instruction dump:
<4>[ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001
<4>[ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000
<98090000>[ 1081.602500]  4e800020 3803ffd0 2b800009

=== After the patch ===

[   51.385216] Instruction dump:
[   51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001
[   51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009

<4>[   51.385216] Instruction dump:
<4>[   51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001
<4>[   51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      40c8cefa
  47. 28 11月, 2011 1 次提交