• B
    powerpc: Rework lazy-interrupt handling · 7230c564
    Benjamin Herrenschmidt 提交于
    The current implementation of lazy interrupts handling has some
    issues that this tries to address.
    
    We don't do the various workarounds we need to do when re-enabling
    interrupts in some cases such as when returning from an interrupt
    and thus we may still lose or get delayed decrementer or doorbell
    interrupts.
    
    The current scheme also makes it much harder to handle the external
    "edge" interrupts provided by some BookE processors when using the
    EPR facility (External Proxy) and the Freescale Hypervisor.
    
    Additionally, we tend to keep interrupts hard disabled in a number
    of cases, such as decrementer interrupts, external interrupts, or
    when a masked decrementer interrupt is pending. This is sub-optimal.
    
    This is an attempt at fixing it all in one go by reworking the way
    we do the lazy interrupt disabling from the ground up.
    
    The base idea is to replace the "hard_enabled" field with a
    "irq_happened" field in which we store a bit mask of what interrupt
    occurred while soft-disabled.
    
    When re-enabling, either via arch_local_irq_restore() or when returning
    from an interrupt, we can now decide what to do by testing bits in that
    field.
    
    We then implement replaying of the missed interrupts either by
    re-using the existing exception frame (in exception exit case) or via
    the creation of a new one from an assembly trampoline (in the
    arch_local_irq_enable case).
    
    This removes the need to play with the decrementer to try to create
    fake interrupts, among others.
    
    In addition, this adds a few refinements:
    
     - We no longer  hard disable decrementer interrupts that occur
    while soft-disabled. We now simply bump the decrementer back to max
    (on BookS) or leave it stopped (on BookE) and continue with hard interrupts
    enabled, which means that we'll potentially get better sample quality from
    performance monitor interrupts.
    
     - Timer, decrementer and doorbell interrupts now hard-enable
    shortly after removing the source of the interrupt, which means
    they no longer run entirely hard disabled. Again, this will improve
    perf sample quality.
    
     - On Book3E 64-bit, we now make the performance monitor interrupt
    act as an NMI like Book3S (the necessary C code for that to work
    appear to already be present in the FSL perf code, notably calling
    nmi_enter instead of irq_enter). (This also fixes a bug where BookE
    perfmon interrupts could clobber r14 ... oops)
    
     - We could make "masked" decrementer interrupts act as NMIs when doing
    timer-based perf sampling to improve the sample quality.
    
    Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
    ---
    
    v2:
    
    - Add hard-enable to decrementer, timer and doorbells
    - Fix CR clobber in masked irq handling on BookE
    - Make embedded perf interrupt act as an NMI
    - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
      to retrigger an interrupt without preventing hard-enable
    
    v3:
    
     - Fix or vs. ori bug on Book3E
     - Fix enabling of interrupts for some exceptions on Book3E
    
    v4:
    
     - Fix resend of doorbells on return from interrupt on Book3E
    
    v5:
    
     - Rebased on top of my latest series, which involves some significant
    rework of some aspects of the patch.
    
    v6:
     - 32-bit compile fix
     - more compile fixes with various .config combos
     - factor out the asm code to soft-disable interrupts
     - remove the C wrapper around preempt_schedule_irq
    
    v7:
     - Fix a bug with hard irq state tracking on native power7
    7230c564
process.c 32.8 KB