Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 21 11月, 2015 10 次提交
  3. 19 11月, 2015 1 次提交
  5. 17 11月, 2015 3 次提交
  7. 08 11月, 2015 1 次提交
  9. 28 10月, 2015 1 次提交
    • S
      clk: qcom: msm8960: Fix dsi1/2 halt bits · e5bf1991
      由 Stephen Boyd 提交于 
      The halt bits for these clocks seem wrong. I get the following
warning while booting on an msm8960-cdp:

WARNING: CPU: 0 PID: 1 at drivers/clk/qcom/clk-branch.c:97 clk_branch_toggle+0xd0/0x138()
dsi1_clk status stuck at 'on'
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc3-00113-g5532cfb5 #110
Hardware name: Qualcomm (Flattened Device Tree)
[<c0216984>] (unwind_backtrace) from [<c02138f8>] (show_stack+0x10/0x14)
[<c02138f8>] (show_stack) from [<c04a525c>] (dump_stack+0x70/0xbc)
[<c04a525c>] (dump_stack) from [<c0223c70>] (warn_slowpath_common+0x78/0xb4)
[<c0223c70>] (warn_slowpath_common) from [<c0223d40>] (warn_slowpath_fmt+0x30/0x40)
[<c0223d40>] (warn_slowpath_fmt) from [<c05fc2dc>] (clk_branch_toggle+0xd0/0x138)
[<c05fc2dc>] (clk_branch_toggle) from [<c05f3f3c>] (clk_disable_unused_subtree+0x98/0x1b0)
[<c05f3f3c>] (clk_disable_unused_subtree) from [<c05f3ec4>] (clk_disable_unused_subtree+0x20/0x1b0)
[<c05f3ec4>] (clk_disable_unused_subtree) from [<c05f5474>] (clk_disable_unused+0x58/0xd8)
[<c05f5474>] (clk_disable_unused) from [<c0209710>] (do_one_initcall+0xac/0x1ec)
[<c0209710>] (do_one_initcall) from [<c0991db4>] (kernel_init_freeable+0x11c/0x1e8)
[<c0991db4>] (kernel_init_freeable) from [<c0727ae0>] (kernel_init+0x8/0xec)
[<c0727ae0>] (kernel_init) from [<c0210238>] (ret_from_fork+0x14/0x3c)

Fix the status bits and the errors go away.

Fixes: 5532cfb5 ("clk: qcom: mmcc-8960: Add DSI related clocks")
Acked-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      e5bf1991
  11. 27 10月, 2015 4 次提交
  13. 26 10月, 2015 2 次提交
  15. 24 10月, 2015 3 次提交
  17. 23 10月, 2015 1 次提交
  19. 22 10月, 2015 14 次提交
    • J
      clk: ns2: add clock support for Broadcom Northstar 2 SoC · f7225a83
      由 Jon Mason 提交于 
      The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all derived from an onboard crystal.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      f7225a83
    • J
      clk: iproc: Separate status and control variables · 40c8bec3
      由 Jon Mason 提交于 
      Some PLLs have separate registers for Status and Control.  The means the
pll_base needs to be split into 2 new variables, so that those PLLs can
specify device tree registers for those independently.  Also, add a new
driver flag to identify this presence of the split, and let the driver
know that additional registers need to be used.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      40c8bec3
    • J
      clk: iproc: Split off dig_filter · f713c6bf
      由 Jon Mason 提交于 
      The PLL loop filter/gain can be located in a separate register on some
SoCs.  Split these off into a separate variable, so that an offset can
be added if necessary.  Also, make the necessary modifications to the
Cygnus and NSP drivers for this change.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      f713c6bf
    • J
      clk: iproc: Add PLL base write function · 7968d241
      由 Jon Mason 提交于 
      All writes to the PLL base address must be flushed if the
IPROC_CLK_NEEDS_READ_BACK flag is set.  If we add a function to make the
necessary write and reads, we can make sure that any future code which
makes PLL base writes will do the correct thing.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      7968d241
    • J
      clk: nsp: add clock support for Broadcom Northstar Plus SoC · 5f024b06
      由 Jon Mason 提交于 
      The Broadcom Northstar Plus SoC is architected under the iProc
architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
derived from an onboard crystal.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      5f024b06
    • J
      clk: iproc: Add PWRCTRL support · 01b6722f
      由 Jon Mason 提交于 
      Some iProc SoC clocks use a different way to control clock power, via
the PWRDWN bit in the PLL control register.  Since the PLL control
register is used to access the PWRDWN bit, there is no need for the
pwr_base when this is being used.  A new flag, IPROC_CLK_EMBED_PWRCTRL,
has been added to identify this usage.  We can use the AON interface to
write the values to enable/disable PWRDOWN.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
[sboyd@codeaurora.org: Remove useless parentheses]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      01b6722f
    • J
      clk: cygnus: Convert all macros to all caps · 2dfc8a27
      由 Jon Mason 提交于 
      The macros that are being used to initialize the values of the clk
structures should be all caps.  Find and replace all of them with their
relevant counterparts.
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      2dfc8a27
    • A
      ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled · 1e9bc9d6
      由 Arnd Bergmann 提交于 
      When CONFIG_CYGNUS is set but CONFIG_COMMON_CLK_IPROC is disabled, the
following link failures are caused:

drivers/built-in.o: In function `cygnus_armpll_init':
:(.init.text+0x1d290): undefined reference to `iproc_armpll_setup'
drivers/built-in.o: In function `cygnus_genpll_clk_init':
:(.init.text+0x1d2c4): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_lcpll0_clk_init':
:(.init.text+0x1d304): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_mipipll_clk_init':
:(.init.text+0x1d344): undefined reference to `iproc_pll_clk_setup'
drivers/built-in.o: In function `cygnus_asiu_init':
:(.init.text+0x1d370): undefined reference to `iproc_asiu_setup'

It is fixed it by always selecting COMMON_CLK_IPROC from
ARCH_BCM_IPROC, and making COMMON_CLK_IPROC a silent option (thus
preventing it from being erroneously disabled by a user).
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      1e9bc9d6
    • J
      clk: imx31: add missing of_node_put · 489e5d41
      由 Julia Lawall 提交于 
      for_each_compatible_node performs an of_node_get on each iteration, so a
break out of the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      489e5d41
    • J
      clk: imx27: add missing of_node_put · 77cb8ee6
      由 Julia Lawall 提交于 
      for_each_compatible_node performs an of_node_get on each iteration, so a
break out of the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      77cb8ee6
    • J
      clk: si5351: add missing of_node_put · a1bdfbaf
      由 Julia Lawall 提交于 
      for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>

The resulting puts were manually moved to the end of the function for
conciseness.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      a1bdfbaf
    • J
      clk: add missing of_node_put · 6bc9d9d6
      由 Julia Lawall 提交于 
      for_each_matching_node_and_match performs an of_node_get on each iteration,
so a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e1,e2,e;
local idexpression np;
@@

 for_each_matching_node_and_match(np, e1, e2) {
   ... when != of_node_put(np)
       when != e = np
(
   return np;
|
+  of_node_put(np);
?  return ...;
)
   ...
 }
// </smpl>

Besides the problem identified by the semantic patch, this patch adds an
of_node_get in front of saving np in a field of parent, to account for the
fact that this value will be put on going on to the next element in the
iteration, and then adds of_node_puts in the two loops where the parent
pointer can be freed.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      6bc9d9d6
    • S
      clk: qoriq: Add ls2080a support. · 9e19ca2f
      由 Scott Wood 提交于 
      LS2080A is the first implementation of the chassis 3 clockgen, which
has a different register layout than previous chips.  It is also little
endian, unlike previous chips.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NStephen Boyd <sboyd@codeaurora.org>
      9e19ca2f
    • S
      clk: qoriq: Move chip-specific knowledge into driver · 0dfc86b3
      由 Scott Wood 提交于 
      The device tree should describe the chips (or chip-like subblocks) in
the system, but it generally does not describe individual registers --
it should identify, rather than describe, a programming interface.

This has not been the case with the QorIQ clockgen nodes.  The
knowledge of what each bit setting of CLKCnCSR means is encoded in
three places (binding, pll node, and mux node), and the last also needs
to know which options are valid on a particular chip.  All three of
these locations are considered stable ABI, making it difficult to fix
mistakes (of which I have found several), much less refactor the
abstraction to be able to address problems, limitations, or new chips.

Under the current binding, a pll clock specifier of 2 means that the
PLL is divided by 4 -- and the driver implements this, unless there
happen to be four clock-output-names rather than 3, in which case it
interprets it as PLL divided by 3.  This does not appear in the binding
documentation at all.  That hack is now considered stable ABI.

The current device tree nodes contain errors, such as saying that
T1040 can set a core clock to PLL/4 when only PLL and PLL/2 are options.
The current binding also ignores some restrictions on clock selection,
such as p5020's requirement that if a core uses the "wrong" PLL, that
PLL must be clocked lower than the "correct" PLL and be at most 80% of
the rated CPU frequency.

Possibly because of the lack of the ability to express such nuance in
the binding, some valid options are omitted from the device trees, such
as the ability on p4080 to run cores 0-3 from PLL3 and cores 4-7 from
PLL1 (again, only if they are at most 80% of rated CPU frequency).
This omission, combined with excessive caution in the cpufreq driver
(addressed in a subsequent patch), means that currently on a 1500 MHz
p4080 with typical PLL configuration, cpufreq can lower the frequency
to 1200 MHz on half the CPUs and do nothing on the others.  With this
patchset, all CPUs can be lowered to 1200 MHz on a rev2 p4080, and on a
rev3 p4080 half can be lowered to 750 MHz and the other half to 600
MHz.

The current binding only deals with CPU clocks.  To describe FMan in
the device tree, we need to describe its clock.  Some chips have
additional muxes that work like the CPU muxes, but are not described in
the device tree.  Others require inspecting the Reset Control Word to
determine which PLL is used.  Rather than continue to extend this mess,
replace it.  Have the driver bind to the chip-specific clockgen
compatible, and keep the detailed description of quirky chip variations
in the driver, where it can be easily fixed, refactored, and extended.

Older device trees will continue to work (including a workaround for
old ls1021a device trees that are missing compatible and reg in the
clockgen node, which even the old binding required).  The pll/mux
details in old device trees will be ignored, but "clocks" properties
pointing at the old nodes will still work, and be directed at the
corresponding new clock.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NStephen Boyd <sboyd@codeaurora.org>
      0dfc86b3