提交 dca1a4b5 编写于 作者: B Boris Brezillon 提交者: Michael Turquette

clk: at91: keep slow clk enabled to prevent system hang

All slow clk users are not properly claiming it (get + prepare + enable)
before using it.
If all users properly claiming this clock release it, the clock is
disabled, but faulty users still depends on it, and the system hangs.

This fix prevents the slow clock from being disabled, and should solve the
hanging issue, but offending drivers should be patched to properly claim
this clock.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: NBo Shen <voice.shen@atmel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
上级 98f87a7b
......@@ -70,6 +70,7 @@ struct clk_sam9x5_slow {
#define to_clk_sam9x5_slow(hw) container_of(hw, struct clk_sam9x5_slow, hw)
static struct clk *slow_clk;
static int clk_slow_osc_prepare(struct clk_hw *hw)
{
......@@ -357,6 +358,8 @@ at91_clk_register_sam9x5_slow(void __iomem *sckcr,
clk = clk_register(NULL, &slowck->hw);
if (IS_ERR(clk))
kfree(slowck);
else
slow_clk = clk;
return clk;
}
......@@ -433,6 +436,8 @@ at91_clk_register_sam9260_slow(struct at91_pmc *pmc,
clk = clk_register(NULL, &slowck->hw);
if (IS_ERR(clk))
kfree(slowck);
else
slow_clk = clk;
return clk;
}
......@@ -465,3 +470,25 @@ void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
/*
* FIXME: All slow clk users are not properly claiming it (get + prepare +
* enable) before using it.
* If all users properly claiming this clock decide that they don't need it
* anymore (or are removed), it is disabled while faulty users are still
* requiring it, and the system hangs.
* Prevent this clock from being disabled until all users are properly
* requesting it.
* Once this is done we should remove this function and the slow_clk variable.
*/
static int __init of_at91_clk_slow_retain(void)
{
if (!slow_clk)
return 0;
__clk_get(slow_clk);
clk_prepare_enable(slow_clk);
return 0;
}
arch_initcall(of_at91_clk_slow_retain);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册