commit 28eb24ff75c5ac130eb326b3b4d0dcecfc0f427d upstream.

In case a hostname resolves to a different IP address (e.g. long
running mounts), make sure to resolve it every time prior to calling
generic_ip_connect() in reconnect.
Suggested-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NPaulo Alcantara <palcantara@suse.de>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 483cbbeddd5fe2c80fd4141ff0748fa06c4ff146 upstream.

This fixes the case when md array assembly fails because of raid cache recovery
unable to allocate a stripe, despite attempts to replay stripes and increase
cache size. This happens because stripes released by r5c_recovery_replay_stripes
and raid5_set_cache_size don't become available for allocation immediately.
Released stripes first are placed on conf->released_stripes list and require
md thread to merge them on conf->inactive_list before they can be allocated.

Patch allows final allocation attempt during cache recovery to wait for
new stripes to become availabe for allocation.

Cc: linux-raid@vger.kernel.org
Cc: Shaohua Li <shli@kernel.org>
Cc: linux-stable <stable@vger.kernel.org> # 4.10+
Fixes: b4c625c6 ("md/r5cache: r5cache recovery: part 1")
Signed-off-by: NAlexei Naberezhnov <anaberezhnov@fb.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8814dc46bd9e347d4de55ec5bf8f16ea54470499 upstream.

When allocating a new node, add_changeset_node() was duplicating the
properties from the respective node in the overlay instead of
allocating a node with no properties.

When this patch is applied the errors reported by the devictree
unittest from patch "of: overlay: add tests to validate kfrees from
overlay removal" will no longer occur.  These error messages are of
the form:

   "OF: ERROR: ..."

and the unittest results will change from:

   ### dt-test ### end of unittest - 203 passed, 7 failed

to

   ### dt-test ### end of unittest - 210 passed, 0 failed
Tested-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b4955ba7bc05e40c8c41071cc121bc26ca65277 upstream.

The changeset entry 'update property' was used for new properties in
an overlay instead of 'add property'.

The decision of whether to use 'update property' was based on whether
the property already exists in the subtree where the node is being
spliced into.  At the top level of creating a changeset describing the
overlay, the target node is in the live devicetree, so checking whether
the property exists in the target node returns the correct result.
As soon as the changeset creation algorithm recurses into a new node,
the target is no longer in the live devicetree, but is instead in the
detached overlay tree, thus all properties are incorrectly found to
already exist in the target.

This fix will expose another devicetree bug that will be fixed
in the following patch in the series.

When this patch is applied the errors reported by the devictree
unittest will change, and the unittest results will change from:

   ### dt-test ### end of unittest - 210 passed, 0 failed

to

   ### dt-test ### end of unittest - 203 passed, 7 failed
Tested-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5b2c2f5a0ea3a43e0dee78059e34c7cb54136dcc upstream.

There is a matching of_node_put() in __of_detach_node_sysfs()

Remove misleading comment from function header comment for
of_detach_node().

This patch may result in memory leaks from code that directly calls
the dynamic node add and delete functions directly instead of
using changesets.

This commit should result in powerpc systems that dynamically
allocate a node, then later deallocate the node to have a
memory leak when the node is deallocated.

The next commit will fix the leak.
Tested-by: NAlan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 144552c786925314c1e7cb8f91a71dae1aca8798 upstream.

Add checks:
  - attempted kfree due to refcount reaching zero before overlay
    is removed
  - properties linked to an overlay node when the node is removed
  - node refcount > one during node removal in a changeset destroy,
    if the node was created by the changeset

After applying this patch, several validation warnings will be
reported from the devicetree unittest during boot due to
pre-existing devicetree bugs. The warnings will be similar to:

  OF: ERROR: of_node_release(), unexpected properties in /testcase-data/overlay-node/test-bus/test-unittest11
  OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data-2/substation@100/
  hvac-medium-2
Tested-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a613b26a50136ae90ab13943afe90bcbd34adb44 upstream.

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Reviewed-by: NFrank Rowand <frank.rowand@sony.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e0a352fabce61f730341d119fbedf71ffdb8663f upstream.

We had a race in the old balloon compaction code before b1123ea6
("mm: balloon: use general non-lru movable page feature") refactored it
that became visible after backporting 195a8c43 ("virtio-balloon:
deflate via a page list") without the refactoring.

The bug existed from commit d6d86c0a ("mm/balloon_compaction:
redesign ballooned pages management") till b1123ea6 ("mm: balloon:
use general non-lru movable page feature").  d6d86c0a
("mm/balloon_compaction: redesign ballooned pages management") was
backported to 3.12, so the broken kernels are stable kernels [3.12 -
4.7].

There was a subtle race between dropping the page lock of the newpage in
__unmap_and_move() and checking for __is_movable_balloon_page(newpage).

Just after dropping this page lock, virtio-balloon could go ahead and
deflate the newpage, effectively dequeueing it and clearing PageBalloon,
in turn making __is_movable_balloon_page(newpage) fail.

This resulted in dropping the reference of the newpage via
putback_lru_page(newpage) instead of put_page(newpage), leading to
page->lru getting modified and a !LRU page ending up in the LRU lists.
With 195a8c43 ("virtio-balloon: deflate via a page list")
backported, one would suddenly get corrupted lists in
release_pages_balloon():

- WARNING: CPU: 13 PID: 6586 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
- list_del corruption. prev->next should be ffffe253961090a0, but was dead000000000100

Nowadays this race is no longer possible, but it is hidden behind very
ugly handling of __ClearPageMovable() and __PageMovable().

__ClearPageMovable() will not make __PageMovable() fail, only
PageMovable().  So the new check (__PageMovable(newpage)) will still
hold even after newpage was dequeued by virtio-balloon.

If anybody would ever change that special handling, the BUG would be
introduced again.  So instead, make it explicit and use the information
of the original isolated page before migration.

This patch can be backported fairly easy to stable kernels (in contrast
to the refactoring).

Link: http://lkml.kernel.org/r/20190129233217.10747-1-david@redhat.com
Fixes: d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management")
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Reported-by: NVratislav Bendel <vbendel@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NRafael Aquini <aquini@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vratislav Bendel <vbendel@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>	[3.12 - 4.7]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6376360ecbe525a9c17b3d081dfd88ba3e4ed65b upstream.

Currently memory_failure() is racy against process's exiting, which
results in kernel crash by null pointer dereference.

The root cause is that memory_failure() uses force_sig() to forcibly
kill asynchronous (meaning not in the current context) processes.  As
discussed in thread https://lkml.org/lkml/2010/6/8/236 years ago for OOM
fixes, this is not a right thing to do.  OOM solves this issue by using
do_send_sig_info() as done in commit d2d39309 ("signal:
oom_kill_task: use SEND_SIG_FORCED instead of force_sig()"), so this
patch is suggesting to do the same for hwpoison.  do_send_sig_info()
properly accesses to siglock with lock_task_sighand(), so is free from
the reported race.

I confirmed that the reported bug reproduces with inserting some delay
in kill_procs(), and it never reproduces with this patch.

Note that memory_failure() can send another type of signal using
force_sig_mceerr(), and the reported race shouldn't happen on it because
force_sig_mceerr() is called only for synchronous processes (i.e.
BUS_MCEERR_AR happens only when some process accesses to the corrupted
memory.)

Link: http://lkml.kernel.org/r/20190116093046.GA29835@hori1.linux.bs1.fc.nec.co.jpSigned-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NJane Chu <jane.chu@oracle.com>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NWilliam Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cefc7ef3c87d02fc9307835868ff721ea12cc597 upstream.

Syzbot instance running on upstream kernel found a use-after-free bug in
oom_kill_process.  On further inspection it seems like the process
selected to be oom-killed has exited even before reaching
read_lock(&tasklist_lock) in oom_kill_process().  More specifically the
tsk->usage is 1 which is due to get_task_struct() in oom_evaluate_task()
and the put_task_struct within for_each_thread() frees the tsk and
for_each_thread() tries to access the tsk.  The easiest fix is to do
get/put across the for_each_thread() on the selected task.

Now the next question is should we continue with the oom-kill as the
previously selected task has exited? However before adding more
complexity and heuristics, let's answer why we even look at the children
of oom-kill selected task? The select_bad_process() has already selected
the worst process in the system/memcg.  Due to race, the selected
process might not be the worst at the kill time but does that matter?
The userspace can use the oom_score_adj interface to prefer children to
be killed before the parent.  I looked at the history but it seems like
this is there before git history.

Link: http://lkml.kernel.org/r/20190121215850.221745-1-shakeelb@google.com
Reported-by: syzbot+7fbbfa368521945f0e3d@syzkaller.appspotmail.com
Fixes: 6b0c81b3 ("mm, oom: reduce dependency on tasklist_lock")
Signed-off-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NRoman Gushchin <guro@fb.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eeb0efd071d821a88da3fbd35f2d478f40d3b2ea upstream.

This is the same sort of error we saw in commit 17e2e7d7e1b8 ("mm,
page_alloc: fix has_unmovable_pages for HugePages").

Gigantic hugepages cross several memblocks, so it can be that the page
we get in scan_movable_pages() is a page-tail belonging to a
1G-hugepage.  If that happens, page_hstate()->size_to_hstate() will
return NULL, and we will blow up in hugepage_migration_supported().

The splat is as follows:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1350 Comm: bash Tainted: G            E     5.0.0-rc1-mm1-1-default+ #27
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:__offline_pages+0x6ae/0x900
  Call Trace:
   memory_subsys_offline+0x42/0x60
   device_offline+0x80/0xa0
   state_store+0xab/0xc0
   kernfs_fop_write+0x102/0x180
   __vfs_write+0x26/0x190
   vfs_write+0xad/0x1b0
   ksys_write+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  Modules linked in: af_packet(E) xt_tcpudp(E) ipt_REJECT(E) xt_conntrack(E) nf_conntrack(E) nf_defrag_ipv4(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) bridge(E) stp(E) llc(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) iptable_filter(E) ip_tables(E) x_tables(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) bochs_drm(E) ttm(E) aesni_intel(E) drm_kms_helper(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) drm(E) virtio_net(E) syscopyarea(E) sysfillrect(E) net_failover(E) sysimgblt(E) pcspkr(E) failover(E) i2c_piix4(E) fb_sys_fops(E) parport_pc(E) parport(E) button(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) xxhash(E) raid6_pq(E) sd_mod(E) ata_generic(E) ata_piix(E) ahci(E) libahci(E) libata(E) crc32c_intel(E) serio_raw(E) virtio_pci(E) virtio_ring(E) virtio(E) sg(E) scsi_mod(E) autofs4(E)

[akpm@linux-foundation.org: fix brace layout, per David.  Reduce indentation]
Link: http://lkml.kernel.org/r/20190122154407.18417-1-osalvador@suse.deSigned-off-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NAnthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9bcdeb51bd7d2ae9fe65ea4d60643d2aeef5bfe3 upstream.

Arkadiusz reported that enabling memcg's group oom killing causes
strange memcg statistics where there is no task in a memcg despite the
number of tasks in that memcg is not 0.  It turned out that there is a
bug in wake_oom_reaper() which allows enqueuing same task twice which
makes impossible to decrease the number of tasks in that memcg due to a
refcount leak.

This bug existed since the OOM reaper became invokable from
task_will_free_mem(current) path in out_of_memory() in Linux 4.7,

  T1@P1     |T2@P1     |T3@P1     |OOM reaper
  ----------+----------+----------+------------
                                   # Processing an OOM victim in a different memcg domain.
                        try_charge()
                          mem_cgroup_out_of_memory()
                            mutex_lock(&oom_lock)
             try_charge()
               mem_cgroup_out_of_memory()
                 mutex_lock(&oom_lock)
  try_charge()
    mem_cgroup_out_of_memory()
      mutex_lock(&oom_lock)
                            out_of_memory()
                              oom_kill_process(P1)
                                do_send_sig_info(SIGKILL, @P1)
                                mark_oom_victim(T1@P1)
                                wake_oom_reaper(T1@P1) # T1@P1 is enqueued.
                            mutex_unlock(&oom_lock)
                 out_of_memory()
                   mark_oom_victim(T2@P1)
                   wake_oom_reaper(T2@P1) # T2@P1 is enqueued.
                 mutex_unlock(&oom_lock)
      out_of_memory()
        mark_oom_victim(T1@P1)
        wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL.
      mutex_unlock(&oom_lock)
                                   # Completed processing an OOM victim in a different memcg domain.
                                   spin_lock(&oom_reaper_lock)
                                   # T1P1 is dequeued.
                                   spin_unlock(&oom_reaper_lock)

but memcg's group oom killing made it easier to trigger this bug by
calling wake_oom_reaper() on the same task from one out_of_memory()
request.

Fix this bug using an approach used by commit 855b0183 ("oom,
oom_reaper: disable oom_reaper for oom_kill_allocating_task").  As a
side effect of this patch, this patch also avoids enqueuing multiple
threads sharing memory via task_will_free_mem(current) path.

Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp
Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp
Fixes: af8e15cc ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head")
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Tested-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: Jay Kamat <jgkamat@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ac25013fb9e4ed595cd608a406191e93520881e upstream.

hugetlb needs the same fix as faultin_nopage (which was applied in
commit 96312e61 ("mm/gup.c: teach get_user_pages_unlocked to handle
FOLL_NOWAIT")) or KVM hangs because it thinks the mmap_sem was already
released by hugetlb_fault() if it returned VM_FAULT_RETRY, but it wasn't
in the FOLL_NOWAIT case.

Link: http://lkml.kernel.org/r/20190109020203.26669-2-aarcange@redhat.com
Fixes: ce53053c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()")
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Tested-by: N"Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reported-by: N"Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8fb335e078378c8426fabeed1ebee1fbf915690c upstream.

Currently, exit_ptrace() adds all ptraced tasks in a dead list, then
zap_pid_ns_processes() waits on all tasks in a current pidns, and only
then are tasks from the dead list released.

zap_pid_ns_processes() can get stuck on waiting tasks from the dead
list.  In this case, we will have one unkillable process with one or
more dead children.

Thanks to Oleg for the advice to release tasks in find_child_reaper().

Link: http://lkml.kernel.org/r/20190110175200.12442-1-avagin@gmail.com
Fixes: 7c8bd232 ("exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent()")
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 532b618bdf237250d6d4566536d4b6ce3d0a31fe upstream.

The subvol_name is allocated in btrfs_parse_subvol_options and is
consumed and freed in mount_subvol.  Add a free to the error paths that
don't call mount_subvol so that it is guaranteed that subvol_name is
freed when an error happens.

Fixes: 312c89fb ("btrfs: cleanup btrfs_mount() using btrfs_mount_root()")
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a6279470762c19ba97e454f90798373dccdf6148 upstream.

When splitting a leaf or node from one of the trees that are modified when
flushing pending block groups (extent, chunk, device and free space trees),
we need to allocate a new tree block, which in turn can result in the need
to allocate a new block group. After allocating the new block group we may
need to flush new block groups that were previously allocated during the
course of the current transaction, which is what may cause a deadlock due
to attempts to write lock twice the same leaf or node, as when splitting
a leaf or node we are holding a write lock on it and its parent node.

The same type of deadlock can also happen when increasing the tree's
height, since we are holding a lock on the existing root while allocating
the tree block to use as the new root node.

An example trace when the deadlock happens during the leaf split path is:

  [27175.293054] CPU: 0 PID: 3005 Comm: kworker/u17:6 Tainted: G        W         4.19.16 #1
  [27175.293942] Hardware name: Penguin Computing Relion 1900/MD90-FS0-ZB-XX, BIOS R15 06/25/2018
  [27175.294846] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
  (...)
  [27175.298384] RSP: 0018:ffffab2087107758 EFLAGS: 00010246
  [27175.299269] RAX: 0000000000000bbd RBX: ffff9fadc7141c48 RCX: 0000000000000001
  [27175.300155] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9fadc7141c48
  [27175.301023] RBP: 0000000000000001 R08: ffff9faeb6ac1040 R09: ffff9fa9c0000000
  [27175.301887] R10: 0000000000000000 R11: 0000000000000040 R12: ffff9fb21aac8000
  [27175.302743] R13: ffff9fb1a64d6a20 R14: 0000000000000001 R15: ffff9fb1a64d6a18
  [27175.303601] FS:  0000000000000000(0000) GS:ffff9fb21fa00000(0000) knlGS:0000000000000000
  [27175.304468] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [27175.305339] CR2: 00007fdc8743ead8 CR3: 0000000763e0a006 CR4: 00000000003606f0
  [27175.306220] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [27175.307087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [27175.307940] Call Trace:
  [27175.308802]  btrfs_search_slot+0x779/0x9a0 [btrfs]
  [27175.309669]  ? update_space_info+0xba/0xe0 [btrfs]
  [27175.310534]  btrfs_insert_empty_items+0x67/0xc0 [btrfs]
  [27175.311397]  btrfs_insert_item+0x60/0xd0 [btrfs]
  [27175.312253]  btrfs_create_pending_block_groups+0xee/0x210 [btrfs]
  [27175.313116]  do_chunk_alloc+0x25f/0x300 [btrfs]
  [27175.313984]  find_free_extent+0x706/0x10d0 [btrfs]
  [27175.314855]  btrfs_reserve_extent+0x9b/0x1d0 [btrfs]
  [27175.315707]  btrfs_alloc_tree_block+0x100/0x5b0 [btrfs]
  [27175.316548]  split_leaf+0x130/0x610 [btrfs]
  [27175.317390]  btrfs_search_slot+0x94d/0x9a0 [btrfs]
  [27175.318235]  btrfs_insert_empty_items+0x67/0xc0 [btrfs]
  [27175.319087]  alloc_reserved_file_extent+0x84/0x2c0 [btrfs]
  [27175.319938]  __btrfs_run_delayed_refs+0x596/0x1150 [btrfs]
  [27175.320792]  btrfs_run_delayed_refs+0xed/0x1b0 [btrfs]
  [27175.321643]  delayed_ref_async_start+0x81/0x90 [btrfs]
  [27175.322491]  normal_work_helper+0xd0/0x320 [btrfs]
  [27175.323328]  ? move_linked_works+0x6e/0xa0
  [27175.324160]  process_one_work+0x191/0x370
  [27175.324976]  worker_thread+0x4f/0x3b0
  [27175.325763]  kthread+0xf8/0x130
  [27175.326531]  ? rescuer_thread+0x320/0x320
  [27175.327284]  ? kthread_create_worker_on_cpu+0x50/0x50
  [27175.328027]  ret_from_fork+0x35/0x40
  [27175.328741] ---[ end trace 300a1b9f0ac30e26 ]---

Fix this by preventing the flushing of new blocks groups when splitting a
leaf/node and when inserting a new root node for one of the trees modified
by the flushing operation, similar to what is done when COWing a node/leaf
from on of these trees.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202383Reported-by: NEli V <eliventer@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2bd44dadd5bfb4135162322fd0b45a174d4ad5bf upstream.

We need to handle mmc_of_parse() errors during probe.

This finally fixes the wifi regression on Raspberry Pi 3 series.
In error case the wifi chip was permanently in reset because of
the power sequence depending on the deferred probe of the GPIO expander.

Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 71b12beaf12f21a53bfe100795d0797f1035b570 ]

According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b3f2f3799a972d3863d0fdc2ab6287aef6ca631f ]

When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.

The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.

The key that matches this behavior the closest is KEY_SCREENLOCK.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 7709b0dc265f28695487712c45f02bbd1f98415d upstream.

Applications that use the stack for execution purposes cause userspace PSM
jobs to fail during mmap().

Both Fortran (non-standard format parsing) and C (callback functions
located in the stack) applications can be written such that stack
execution is required. The linker notes this via the gnu_stack ELF flag.

This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps
to have PROT_EXEC for the process.

Checking for VM_EXEC bit and failing the request with EPERM is overly
conservative and will break any PSM application using executable stacks.

Cc: <stable@vger.kernel.org> #v4.14+
Fixes: 12220267 ("IB/hfi: Protect against writable mmap")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 693abe11aa6b27aed6eb8222162f8fb986325cef upstream.

Fix hp_pin always no value.

[More notes on the changes:

 The hp_pin value that is referred in alc294_hp_init() is always zero
 at the moment the function gets called, hence this is actually
 useless as in the current code.

 And, this kind of init sequence should be called from the codec init
 callback, instead of the parser function.  So, the first fix in this
 patch to move the call call into its own init_hook.

 OTOH, this function is needed to be called only once after the boot,
 and it'd take too long for invoking at each resume (where the init
 callback gets called).  So we add a new flag and invoke this only
 once as an additional fix.

 The one case is still not covered, though: S4 resume.  But this
 change itself won't lead to any regression in that regard, so we
 leave S4 issue as is for now and fix it later.  -- tiwai ]

Fixes: bde1a7459623 ("ALSA: hda/realtek - Fixed headphone issue for ALC700")
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e6966646b6bc5078d579151b90016522d4ff2cb upstream.

This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit')
in order to enable Native DSD support.

[ NOTE: this could be handled in the generic way with fp->dvd_raw if
  we add 0x10cb to the vendor whitelist, but since 0x10cb shows a
  different vendor name (Erantech), put to the individual entry at
  this time -- tiwai ]
Signed-off-by: NOlek Poplavsky <woodenbits@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3751e008da0df4384031bd66a516c0292f915605 upstream.

to set cmd internal delay, need set PAD_TUNE register but not PAD_CMD_TUNE
register.
Signed-off-by: NChaotian Jing <chaotian.jing@mediatek.com>
Fixes: 1ede5cb8 ("mmc: mediatek: Use data tune for CMD line tune")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c9620b1cc9b69e82fa8d4081d646d0016b602e7 upstream.

The BCM2835 MMC host driver requests a DMA channel on probe but neglects
to release the channel in the probe error path.  The channel may
therefore be leaked, in particular if devm_clk_get() causes probe
deferral.  Fix it.

Fixes: 660fc733 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.12+
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e74c98ca2d6ae4376cc15fa2a22483430909d96b upstream.

This reverts commit 2d29f6b96d8f80322ed2dd895bca590491c38d34.

It turns out that the fix can lead to a ~20 percent performance regression
in initial writes to the page cache according to iozone.  Let's revert this
for now to have more time for a proper fix.

Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f785ffb61605734b518afa766d1b5445e9f38c8d upstream.

When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the
SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals.

Thus this patch fixes the issue.

Fixes: 25518e02 ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NNeo Hou <neo.hou@unisoc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09d158d52d2bceda736797a61b6c13d7fc83707b upstream.

Since differnt type EICs have its own data register to read, thus fix the
incorrect data register.

Fixes: 25518e02 ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NNeo Hou <neo.hou@unisoc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2486e67374aa8b7854c2de32869642c2873b3d53 upstream.

When multiple instances of pcf857x chips are present, a fix up
message [1] is printed during the probe of the 2nd and later
instances.

The issue is that the driver is using the same irq_chip data
structure between multiple instances.

Fix this by allocating the irq_chip data structure per instance.

[1] fix up message addressed by this patch
[    1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1033be58992f818dc564196ded2bcc3f360bc297 upstream.

Nested interrupts run inside the calling thread's context and the top
half handler is never called which means that we never read the
timestamp.

This issue came up when trying to read line events from a gpiochip
using regmap_irq_chip for interrupts.

Fix it by reading the timestamp from the irq thread function if it's
still 0 by the time the second handler is called.

Fixes: d58f2bf2 ("gpio: Timestamp events in hardirq handler")
Cc: stable@vger.kernel.org
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2095a45e345e669ea77a9b34bdd7de5ceb422f93 upstream.

The altr_a10sr_gpio_direction_output should set proper output level
based on the value argument.

Fixes: 26a48c4c ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.")
Cc: <stable@vger.kernel.org>
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Tested by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7daa9c8fd191724b9ab9580a7be55cd1a67d799 upstream.

During resume hibernate restores all physical memory. Any memory
that is accessed with the MMU disabled needs to be cleaned to the
PoC.

KVMs __hyp_text was previously ommitted as it runs with the MMU
enabled, but now that the hyp-stub is located in this section,
we must clean __hyp_text too.

This ensures secondary CPUs that come online after hibernate
has finished resuming, and load KVM via the freshly written
hyp-stub see the correct instructions.
Signed-off-by: NJames Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8fac5cbdfe0f01254d9d265c6aa1a95f94f58595 upstream.

The hyp-stub is loaded by the kernel's early startup code at EL2
during boot, before KVM takes ownership later. The hyp-stub's
text is part of the regular kernel text, meaning it can be kprobed.

A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid.

Add it to the __hyp_text.
Signed-off-by: NJames Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 132fdc379eb143932d209a20fd581e1ce7630960 upstream.

Commit 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache
for kernel mappings") was aimed at fixing the I-cache invalidation for
kernel mappings. However, it inadvertently caused all cache maintenance
for user mappings via set_pte_at() -> __sync_icache_dcache() ->
sync_icache_aliases() to call kick_all_cpus_sync().
Reported-by: NShijith Thotton <sthotton@marvell.com>
Tested-by: NShijith Thotton <sthotton@marvell.com>
Reported-by: NWandun Chen <chenwandun@huawei.com>
Fixes: 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Cc: <stable@vger.kernel.org> # 4.19.x-
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ea235932314311f15ea6cf65c1393ed7e31af70 upstream.

Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are
clean to the PoC") added cache maintenance to ensure that global
variables set by the kaslr init routine are not wiped clean due to
cache invalidation occurring during the second round of page table
creation.

However, if kaslr_early_init() exits early with no randomization
being applied (either due to the lack of a seed, or because the user
has disabled kaslr explicitly), no cache maintenance is performed,
leading to the same issue we attempted to fix earlier, as far as the
module_alloc_base variable is concerned.

Note that module_alloc_base cannot be initialized statically, because
that would cause it to be subject to a R_AARCH64_RELATIVE relocation,
causing it to be overwritten by the second round of KASLR relocation
processing.

Fixes: f80fb3a3 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 65dbb423cf28232fed1732b779249d6164c5999b upstream.

Originally, cns3xxx used its own functions for mapping, reading and
writing config registers.

Commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config
accessors") removed the internal PCI config write function in favor of
the generic one:

  cns3xxx_pci_write_config() --> pci_generic_config_write()

cns3xxx_pci_write_config() expected aligned addresses, being produced by
cns3xxx_pci_map_bus() while the generic one pci_generic_config_write()
actually expects the real address as both the function and hardware are
capable of byte-aligned writes.

This currently leads to pci_generic_config_write() writing to the wrong
registers.

For instance, upon ath9k module loading:

- driver ath9k gets loaded
- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER,
  located at 0x0D
- cns3xxx_pci_map_bus() aligns the address to 0x0C
- pci_generic_config_write() effectively writes 0xA8 into register 0x0C
  (CACHE_LINE_SIZE)

Fix the bug by removing the alignment in the cns3xxx mapping function.

Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
Signed-off-by: NKoen Vandeputte <koen.vandeputte@ncentric.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NKrzysztof Halasa <khalasa@piap.pl>
Acked-by: NTim Harvey <tharvey@gateworks.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
CC: stable@vger.kernel.org	# v4.0+
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Olof Johansson <olof@lixom.net>
CC: Robin Leblon <robin.leblon@ncentric.com>
CC: Rob Herring <robh@kernel.org>
CC: Russell King <linux@armlinux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8fc75bed96bb94e23ca51bd9be4daf65c57697bf upstream.

Ensure that we return the fatal error value that caused us to exit
nfs_page_async_flush().

Fixes: c373fff7 ("NFSv4: Don't special case "launder"")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.12+
Reviewed-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed5f13261cb65b02c611ae9971677f33581d4286 upstream.

Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.
Reported-by: NColin Ian King <colin.king@canonical.com>
Fixes: a33b2d03 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NShuah Khan <shuah@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 198bc3252ea3a45b0c5d500e6a5b91cfdd08f001 upstream.

Commit 9d3a4de4 ("iommu: Disambiguate MSI region types") changed
the reserved region type in intel_iommu_get_resv_regions() from
IOMMU_RESV_RESERVED to IOMMU_RESV_MSI, but it forgot to also change
the type in intel_iommu_put_resv_regions().

This leads to a memory leak, because now the check in
intel_iommu_put_resv_regions() for IOMMU_RESV_RESERVED will never
be true, and no allocated regions will be freed.

Fix this by changing the region type in intel_iommu_put_resv_regions()
to IOMMU_RESV_MSI, matching the type of the allocated regions.

Fixes: 9d3a4de4 ("iommu: Disambiguate MSI region types")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1dbd449c9943e3145148cc893c2461b72ba6fef0 upstream.

The nr_dentry_unused per-cpu counter tracks dentries in both the LRU
lists and the shrink lists where the DCACHE_LRU_LIST bit is set.

The shrink_dcache_sb() function moves dentries from the LRU list to a
shrink list and subtracts the dentry count from nr_dentry_unused.  This
is incorrect as the nr_dentry_unused count will also be decremented in
shrink_dentry_list() via d_shrink_del().

To fix this double decrement, the decrement in the shrink_dcache_sb()
function is taken out.

Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all."
Cc: stable@kernel.org
Signed-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>