- 19 8月, 2009 2 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mike Arthur 提交于
The WM8711 or WM8711L (WM8711/L) is a low power stereo DAC with an integrated headphone driver. The WM8711/L is designed specifically for portable MP3 audio and speech players. The WM8711/L is also ideal for MD, CD machines and DAT players. Signed-off-by: NMike Arthur <Mike.Arthur@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 5月, 2009 3 次提交
-
-
由 David Brownell 提交于
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
This is a buildfix for the DaVinci PCM code, resyncing it with the version in the DaVinci tree. The notable change is using current EDMA interfaces, which recently merged to mainline. (The older interfaces never made it into mainline.) NOTE: open issue, the DMA should be to/from SRAM; see chip errata for more info. The artifacts are extremely easy to hear on DM355 hardware (not yet supported in mainline), but don't seem as audible on DM6446 hardwaare (which does have mainline support). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 5月, 2009 1 次提交
-
-
由 Mike Rapoport 提交于
If the card was not instantiated in snd_soc_instantiate_card, calling soc-remove will crash because some of codec, cpu_dai and card .remove methods are called twice. Fix this by returning from soc_remove immediately. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 5月, 2009 1 次提交
-
-
由 Jinyoung Park 提交于
The mis-typing exist in dapm controller definitions and dapm route definitions, so happen mis-matched error when snd_soc_dapm_add_routes(). Cc: stable@kernel.org Signed-off-by: NJinyoung Park <parkjy@mtekvision.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com
-
- 04 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The regression was fixed by commit 3e5b5016, so no need to mark this driver as BROKEN. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 4月, 2009 4 次提交
-
-
由 Joonyoung Shim 提交于
The gain control for earpiece amplifier uses 0dB ~ 12dB according to the TRM, but the present code is implemented to -6dB ~ 6dB. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that really don't give the precise pointer value. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jon Smirl 提交于
Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
We need to check only if the WM8350 is master and only when starting the stream so if either is not true then we can skip the check. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 4月, 2009 2 次提交
-
-
由 Mark Brown 提交于
It relies on EXPORT_SYMBOL_GPL() symbols. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 4月, 2009 1 次提交
-
-
由 Mark Brown 提交于
The driver is out of sync with the core functions it is using. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 4月, 2009 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 19 4月, 2009 1 次提交
-
-
由 Marek Vasut 提交于
Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
- 18 4月, 2009 1 次提交
-
-
由 Russell King - ARM Linux 提交于
I notice that the fixes were merged, minus one: sound/soc/codecs/wm9705.c: At top level: sound/soc/codecs/wm9705.c:445: warning: initialization from incompatible pointer type so you might find this trivial patch useful. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 4月, 2009 2 次提交
-
-
由 Jarkko Nikula 提交于
My email address is going to expire soon so update it. Adding also Peter Ujfalusi <peter.ujfalusi@nokia.com> as a second contact to OMAP core drivers since I won't have anymore access to non-public OMAP documentation in the future and Peter is working with these drivers as well. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Philipp Zabel 提交于
Those macros are just screwed as soon as CONFIG_PXA25x is enabled. This patch - changes ssp_set_scr to take an ssp_dev pointer instead of ssp_device - adds a corresponding ssp_get_scr function. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 4月, 2009 7 次提交
-
-
由 Jarkko Nikula 提交于
Using inverted FS polarity in OSK5912 must be an error since TLV320AIC23 do not have support for inverted polarities. This is mostly due the hassle with the DSP formats in OMAP McBSP DAI and inversion on OMAP side probably just made this configuration working at some point. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Acked-by: NArun KS <arunks@mistralsolutions.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
The DSP format wasn't still correct in OMAP McBSP DAI even after the commit bd25867a. Thanks to Peter Ujfalusi <peter.ujfalusi@nokia.com> for noticing and being part of the fix. Now the FS length definition is more clear by defining it with FWID(0). Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Dooks 提交于
Fix accidental change of <mach/regs-gpio.h> to <plat/regs-gpio.h> in s3c2412-i2s.c Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Dooks 提交于
Fix the build error in s3c-i2s-v2.c caused by a change to the snd_soc_dai ops field. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Dooks 提交于
The definition of s3c_i2sv2_iis_calc_rate was never renamed from s3c2412_iis_calc_rate, so rename this to allow the build to work. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Dooks 提交于
Fix build errors in sound/soc/s3c24xx/jive_wm8750.c from changes to ASoC. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Daniel Mack 提交于
pxa_ssp_set_dai_fmt() currently has an early exit if the desired format equals the current configuration. This is correct behaviour unless this function is called with a zero value parameter for the first time. Zero is a valid value for this function, but the early exit is bogus in this case. Hence, set priv->dai_fmt to -1 in the beginning so we can configure the port. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 4月, 2009 1 次提交
-
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 4月, 2009 2 次提交
-
-
由 Mark Brown 提交于
Due to the process and communications issues with the 2.6.30 S3C platform merges none of the underlying arch/arm code for S3C64xx audio support made it into mainline, rendering the drivers useless. Disable them in Kconfig to avoid user confusion - users patching in the required support can always reenable this too. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 4月, 2009 3 次提交
-
-
由 Yang Hongyang 提交于
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Ujfalusi 提交于
Fix for compillation error introduced by the constrain patch. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Anton Vorontsov 提交于
The driver should pass a device that specifies internal DMA ops, but substream->pcm is just a logical device, and thus doesn't have arch- specific dma callbacks, therefore following bug appears: Freescale Synchronous Serial Interface (SSI) ASoC Driver ------------[ cut here ]------------ kernel BUG at arch/powerpc/include/asm/dma-mapping.h:237! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c02259c4] snd_malloc_dev_pages+0x58/0xac LR [c0225c74] snd_dma_alloc_pages+0xf8/0x108 Call Trace: [df02bde0] [df02be2c] 0xdf02be2c (unreliable) [df02bdf0] [c0225c74] snd_dma_alloc_pages+0xf8/0x108 [df02be10] [c023a100] fsl_dma_new+0x68/0x124 [df02be20] [c02342ac] soc_new_pcm+0x1bc/0x234 [df02bea0] [c02343dc] snd_soc_new_pcms+0xb8/0x148 [df02bed0] [c023824c] cs4270_probe+0x34/0x124 [df02bef0] [c0232fe8] snd_soc_instantiate_card+0x1a4/0x2f4 [df02bf20] [c0233164] snd_soc_instantiate_cards+0x2c/0x68 [df02bf30] [c0234704] snd_soc_register_platform+0x60/0x80 [df02bf50] [c03d5664] fsl_soc_platform_init+0x18/0x28 ... This patch fixes the issue by using card's device instead. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 4月, 2009 1 次提交
-
-
由 Dan Carpenter 提交于
ak4535_remove() from sound/soc/codecs/ak4535.c calls i2c_unregister_device() with a possibly null pointer. This bug was found by smatch (http://repo.or.cz/w/smatch.git/). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 4月, 2009 1 次提交
-
-
由 Peter Ujfalusi 提交于
Adds the needed code to be able to use 96KHz playback. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 4月, 2009 5 次提交
-
-
由 Mark Brown 提交于
Without this the WM9705 driver fails badly when resuming. Tested-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Ensure that any AC97 devices that bind to the CODEC are below the ASoC device in the device tree so the suspend and resume code can figure out what order to handle them in. Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
AC97 devices may have other drivers hanging off them directly so need to have resumed when the resume function returns meaning that we can't defer the resume - complete it immediately for them. Non-AC97 devices should not have other drivers hanging directly off the ASoC devices. We only really need the deferral for non-AC97 devices - it's there since some I2C buses are very slow and non-AC97 codecs often have large numbers of registers to restore and require delays to bring the codec up cleanly leading to a substantial impact on overall resume time. Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
McBSP2 in OMAP3 has 1 ksample (1k x 32 bit) internal FIFO. During initial playback startup, this FIFO is keeping the DMA request active until the FIFO is full. So now if ALSA buffer size is smaller, DMA is looping around it while filling up the HW FIFO, generating burst of interrupts as well and SW doesn't have any change to fill enough data. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
In case of duplex mode (capture and playback at the same time), the second stream has to have the same parameters (rate, sample size) as the already running stream. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-