sound/usb/line6/driver.c:484:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

CC: Andrej Krutak <dev@andree.sk>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We must do it this way, because e.g. POD X3 won't play any sound unless
the host listens on the bulk EP, so we cannot export it only via libusb.

The driver currently doesn't use the bulk EP messages in other way,
in future it could e.g. sense/modify volume(s).
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not all line6 devices use the control port.
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not all PODs use MIDI via USB data interface, thus allow avoiding
that code and instead using direct processing.
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

POD X3 can initialize similarly to older PODs, but it doesn't have the MIDI
interface. Instead, configuration is done via proprietary bulk EP messages.
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This has two parts:
* intervals_per_second setup
  (high speed needs 8000, instead of 1000)
* iso_buffers setup (count of iso buffers depends on
  USB speed, 2 is not enough for high speed)
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This basically changes LINE6_ISO_BUFFERS constant to a configurable
iso_buffers property.
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The address cannot be negative so make it unsigned.  Also, an unsigned
int is always sufficient for the length, so no need to overdo it with a
size_t.  Finally, add in range checks to see if the values passed in
actually fit where they are used.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The serial number (aka ESN) is a 32-bit value.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Put an upper bound on how long we will wait for the device to respond to
a read/write request (i.e., 100 milliseconds) and return an error if
this is reached.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device indicates the result of a read/write operation by making the
status available on a subsequent request from the driver.  This is not
ready immediately, though, so the driver is currently slamming the
device with hundreds of pointless requests before getting the expected
response.  Add a two millisecond delay before each attempt.  This is
approximately the behavior observed with version 4.2.7.1 of the Windows
driver.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Provide a unique name for each driver instead of using "line6usb" for
all of them.  This will allow for different configurations based on the
driver type.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

line6_start_timer passes an unsigned int as argument to be used in mod_timer
which is then used by mod_timer as unsigned long, this just fixes up the
argument type. This change helps make static code checkers happy.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Most of them are rather relevant with the definitions in driver.h,
and there are only a few lines, so just rip it off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The definition is no longer used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just reformatting the comments and typos fixed, no functional
changes.  Particularly,
- avoid the kerneldoc marker "/**",
- reduce multiple comment lines into single lines,
- corrected wrongly referred function names
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split some codes in the lengthy line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object.  Better to
put a WARN_ON() for more cautions and abort immediately.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... in line6_disconnect() as well.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver version string was removed in an ealier commit for being
useless.  These are equally useless.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The correct spelling includes the space.  Fix this in strings and
comments that refer to the manufacturer.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both functions are used nowhere.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's used only locally.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is rather useless for a driver that has been already merged into
the official tree.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a fairly big rewrite regarding the card resource management in
line6 drivers:

- The card creation is moved into line6_probe().  This adds the global
  destructor to private_free, so that each driver doesn't have to call
  it any longer.

- The USB disconnect callback handles the card release, thus each
  driver needs to concentrate on only its own resources.  No need to
  snd_card_*() call in the destructor.

- Fix the potential stall in disconnection by removing
  snd_card_free().   It's replaced with snd_card_free_when_closed()
  for asynchronous release.

- The only remaining operation for the card in each driver is the call
  of snd_card_register().  All the rest are dealt in the common module
  by itself.

- These ended up with removal of audio.[ch] as a result of a reduction
  of one layer.  Each driver just needs to call line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kernel already shows the error in the common path.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's non-standard and rather superfluous.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>