ALSA: line6: Add high-speed USB support

This has two parts:
* intervals_per_second setup
  (high speed needs 8000, instead of 1000)
* iso_buffers setup (count of iso buffers depends on
  USB speed, 2 is not enough for high speed)
Signed-off-by: NAndrej Krutak <dev@andree.sk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/usb/line6/capture.c

@@ -181,7 +181,15 @@ static void audio_in_callback(struct urb *urb)
 
 		length += fsize;
 
-		/* the following assumes LINE6_ISO_PACKETS == 1: */
+		BUILD_BUG_ON_MSG(LINE6_ISO_PACKETS != 1,
+			"The following code assumes LINE6_ISO_PACKETS == 1");
+		/* TODO:
+		 * Also, if iso_buffers != 2, the prev frame is almost random at
+		 * playback side.
+		 * This needs to be redesigned. It should be "stable", but we may
+		 * experience sync problems on such high-speed configs.
+		 */
+
 		line6pcm->prev_fbuf = fbuf;
 		line6pcm->prev_fsize = fsize;
 

sound/usb/line6/driver.c

@@ -462,14 +462,18 @@ static void line6_destruct(struct snd_card *card)
 static void line6_get_interval(struct usb_line6 *line6)
 {
 	struct usb_device *usbdev = line6->usbdev;
-	struct usb_host_endpoint *ep;
-	unsigned pipe = usb_rcvintpipe(usbdev, line6->properties->ep_ctrl_r);
-	unsigned epnum = usb_pipeendpoint(pipe);
+	struct usb_host_endpoint *ep = usbdev->ep_in[line6->properties->ep_ctrl_r];
 
-	ep = usbdev->ep_in[epnum];
-	line6->iso_buffers = LINE6_ISO_BUFFERS;
 	if (ep) {
 		line6->interval = ep->desc.bInterval;
+		if (usbdev->speed == USB_SPEED_LOW) {
+			line6->intervals_per_second = USB_LOW_INTERVALS_PER_SECOND;
+			line6->iso_buffers = USB_LOW_ISO_BUFFERS;
+		} else {
+			line6->intervals_per_second = USB_HIGH_INTERVALS_PER_SECOND;
+			line6->iso_buffers = USB_HIGH_ISO_BUFFERS;
+		}
+
 		line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
 	} else {
 		dev_err(line6->ifcdev,
@@ -559,6 +563,7 @@ int line6_probe(struct usb_interface *interface,
 	/* query interface number */
 	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
 
+	/* TODO reserves the bus bandwidth even without actual transfer */
 	ret = usb_set_interface(usbdev, interface_number,
 				properties->altsetting);
 	if (ret < 0) {

sound/usb/line6/driver.h

@@ -18,7 +18,13 @@
 
 #include "midi.h"
 
-#define USB_INTERVALS_PER_SECOND 1000
+/* USB 1.1 speed configuration */
+#define USB_LOW_INTERVALS_PER_SECOND 1000
+#define USB_LOW_ISO_BUFFERS 2
+
+/* USB 2.0+ speed configuration */
+#define USB_HIGH_INTERVALS_PER_SECOND 8000
+#define USB_HIGH_ISO_BUFFERS 16
 
 /* Fallback USB interval and max packet size values */
 #define LINE6_FALLBACK_INTERVAL 10
@@ -109,12 +115,15 @@ struct usb_line6 {
 	/* Properties */
 	const struct line6_properties *properties;
 
-	/* Interval (ms) */
+	/* Interval for data USB packets */
 	int interval;
+	/* ...for isochronous transfers framing */
+	int intervals_per_second;
+
 	/* Number of isochronous URBs used for frame transfers */
 	int iso_buffers;
 
-	/* Maximum size of USB packet */
+	/* Maximum size of data USB packet */
 	int max_packet_size;
 
 	/* Device representing the USB interface */

sound/usb/line6/pcm.h

@@ -20,9 +20,6 @@
 
 #include "driver.h"
 
-/* number of URBs */
-#define LINE6_ISO_BUFFERS	2
-
 /*
 	number of USB frames per URB
 	The Line 6 Windows driver always transmits two frames per packet, but
@@ -31,7 +28,9 @@
 */
 #define LINE6_ISO_PACKETS	1
 
-/* in a "full speed" device (such as the PODxt Pro) this means 1ms */
+/* in a "full speed" device (such as the PODxt Pro) this means 1ms,
+ *  for "high speed" it's 1/8ms
+ */
 #define LINE6_ISO_INTERVAL	1
 
 #define LINE6_IMPULSE_DEFAULT_PERIOD 100

sound/usb/line6/playback.c

@@ -151,7 +151,7 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 		line6pcm->properties->rates.rats[0].num_min;
 	const int frame_factor =
 		line6pcm->properties->rates.rats[0].den *
-		(USB_INTERVALS_PER_SECOND / LINE6_ISO_INTERVAL);
+		(line6pcm->line6->intervals_per_second / LINE6_ISO_INTERVAL);
 	struct urb *urb_out;
 
 	index = find_first_zero_bit(&line6pcm->out.active_urbs,