- 04 10月, 2006 1 次提交
-
-
由 Steven Toth 提交于
A generic change to cards to allow any board to specify whether it needs the wm8775 module loaded (by the core) or not. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 9月, 2006 8 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Add autodetection for PCI subsystem ID 107d:6632, to detect as a Leadtek PVR 2000 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This is the first in a series of patches to add full WinTV-HVR1300 support to Linux. This first patch will enable analog TV support and DVB-T support. Later patches will add the hardware MPEG encoder support. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
If the FX2 does not reset properly during reboot, it can present an invalid USB device ID and fail to attach. Prevent this situation from occuring by resetting the USB part of the card when the PCI part probes. Also fix the GPIO configurations so that analog capture will not inadvertantly reset the USB part. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 David Bussenschutt 提交于
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: NDavid Bussenschutt <buzz@oska.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Naulls 提交于
This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: NPeter Naulls <peter@chocky.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Eric Thomas 提交于
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: NEric Thomas <ethomas@claranet.fr> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Saqeb Akhter 提交于
This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NSaqeb Akhter <johoja@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 13 次提交
-
-
由 Michael Krufky 提交于
Add support for FusionHDTV 3 Gold (original revision), using the card definition for FusionHDTV3 Gold-Q Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
The description of the card has been updated to it's full name/model. The tuner has also been switched to a more compatible one (radio wasn't working, now it is) Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Malcolm Valentine 提交于
Add DVB-T and PAL-G television support for Winfast DTV2000H Signed-off-by: NMalcolm Valentine <farkit@iinet.net.au> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Enabled s-video and composite video inputs. - Updated comments to reflect the current support for this card. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
Added support for a new cx88 card, including it's remote Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Angelo Marconi 提交于
- Add support for ProLink Pixelview Playtv@P7000 Raw video and MPEG encoded video confirmed to work properly. SVideo, Composite and FM inputs are untested - disabled for now. Signed-off-by: NAngelo Marconi <am@massalombarda.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Added autodetection for PCI subsystem id 1822:0019 to use the card definition for CX88_BOARD_DNTV_LIVE_DVB_T_PRO Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- clear I2SIN to deliver the audio stream to the cx23416 mpeg encoder. - enable blackbird support on the KWorld HardwareMpegTV XPert Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Valentin Zagura 提交于
This patch adds support for KWorld MCE 200 Deluxe. Raw video is working perfectly, MPEG capture using cx88-blackbird is also working, but the quality could be improved. svideo and radio until they can be tested also. Signed-off-by: NValentin Zagura <puthre@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- new cards should always be added to the end of the list. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rusty Scott 提交于
Added card definitions for the pcHDTV HD5500 ATSC/QAM card Signed-off-by: NRusty Scott <rustys@ieee.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 5月, 2006 1 次提交
-
-
由 Trent Piepho 提交于
It looks like the HD3000 was prototyped with the 7610 tuner when the driver was developed, but the cards appear to have always shipped with the 7612 tuner and the driver was never adjusted for it. The definition needs to be corrected. - The HD-3000 was prototyped with a Thomson DTT7610, but production versions used a DTT7612 tuner. - This patch changes both dvb-pll settings and V4L tuner type. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 3月, 2006 3 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matheus Izvekov 提交于
This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project. Signed-off-by: NMatheus Izvekov <mizvekov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 3月, 2006 3 次提交
-
-
由 Michael Krufky 提交于
- The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
The init_data array is never changed and need not be on the stack. Turn it into a static variable. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 2月, 2006 4 次提交
-
-
由 Michael Krufky 提交于
Make buffer a static const Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Standard video using the cx88 broadcast decoder is working, but blackbird isn't working yet, audio is only working correctly for television mode. S-Video and Composite are working for video-only, so I have them disabled for now. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- KWorld HardwareMpegTV XPert must set gpio2 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- add radio support for KWorld HardwareMpegTV XPert - fix GPIO settings for tv and radio Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 07 2月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
- Add initial support for KWorld HardwareMpegTV XPert. - uses silicon tuner: tda8290 + tda8275 - standard video using cx88 broadcast decoder is working. - blackbird mpeg encoder support (cx23416) not yet working. - FM radio untested. - audio is only working correctly in television mode, all other modes disabled. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 1月, 2006 3 次提交
-
-
由 Ian Pickworth 提交于
- Recognise Hauppauge card #34519 Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Pickworth 提交于
- Recognise Hauppauge card #34519 Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Add PCI ID for DigitalNow DVB-T Dual, rebranded DViCO FusionHDTV DVB-T Dual. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 23 1月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
- Add PCI ID for DigitalNow DVB-T Dual, rebranded DViCO FusionHDTV DVB-T Dual. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-