提交 2acadefa 编写于 作者: D David Bussenschutt 提交者: Mauro Carvalho Chehab

V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card support

Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card
Signed-off-by: NDavid Bussenschutt <buzz@oska.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 d1009bd7
......@@ -53,3 +53,4 @@
52 -> Geniatech DVB-S [14f1:0084]
53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [0070:1404]
54 -> Norwood Micro TV Tuner
55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980]
......@@ -1251,6 +1251,35 @@ struct cx88_board cx88_boards[] = {
.gpio0 = 0x070b,
}},
},
[CX88_BOARD_TE_DTV_250_OEM_SWANN] = {
.name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x003fffff,
.gpio1 = 0x00e00000,
.gpio2 = 0x003fffff,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x003fffff,
.gpio1 = 0x00e00000,
.gpio2 = 0x003fffff,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x003fffff,
.gpio1 = 0x00e00000,
.gpio2 = 0x003fffff,
.gpio3 = 0x02000000,
}},
},
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
......@@ -1509,6 +1538,10 @@ struct cx88_subid cx88_subids[] = {
.subdevice = 0xc111, /* AverMedia M150-D */
/* This board is known to work with the ASUS PVR416 config */
.card = CX88_BOARD_ASUS_PVR_416,
},{
.subvendor = 0xc180,
.subdevice = 0xc980,
.card = CX88_BOARD_TE_DTV_250_OEM_SWANN,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
......
......@@ -199,6 +199,7 @@ extern struct sram_channel cx88_sram_channels[];
#define CX88_BOARD_GENIATECH_DVBS 52
#define CX88_BOARD_HAUPPAUGE_HVR3000 53
#define CX88_BOARD_NORWOOD_MICRO 54
#define CX88_BOARD_TE_DTV_250_OEM_SWANN 55
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册